Wraps by car

Renault 17 wrap

This page covers the Renault 17 wrap, from vinyl film needs to partial jobs and FAQs. The Renault 17 was produced for one generation from 1972 to 1980. A full wrap of the hatchback body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Renault 17, first generation, factory photo
Renault 17, first generation. Factory color shown.

Renault 17 wrap colors and ideas

  • Renault 17 black wrap
  • Renault 17 white wrap
  • Renault 17 gray wrap
  • Renault 17 silver wrap
  • Renault 17 red wrap
  • Renault 17 blue wrap
  • Renault 17 green wrap
  • Renault 17 yellow wrap
  • Renault 17 orange wrap
  • Renault 17 purple wrap
  • Renault 17 pink wrap
  • Renault 17 teal wrap
  • Renault 17 brown wrap
  • Renault 17 gold wrap
  • Renault 17 chrome wrap
  • Renault 17 color shift wrap
  • Renault 17 carbon fiber wrap
  • Renault 17 camo and patterned wrap

How much vinyl to wrap a Renault 17

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1972–1980hatchback (3 doors)167.5 in (4,255 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Renault 17 wrap cost factors

A Renault 17 wrap cost depends on film choice, surface prep, and how much trim you remove. The car takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a color change wrap. Chrome or patterned film raises the amount to about 56 ft (17 m).

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Renault 17 wraps by generation

Swipe sideways. Tap a card for the full description.

Renault 17, first generation, factory photo
Factory color shown

1972–1980 Renault 17 hatchback (first generation)

1972–1980hatchback (3 doors)167.5 in (4,255 mm)

The first generation Renault 17 spans 1972 to 1980, so paint age is part of planning a wrap. Panels on a car of these years may be original or repainted, and a test spot comes before a full wrap. Check each panel before the installer lays film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Renault 17

A partial wrap on a Renault 17 can cover the roof, hood, or mirror caps. A Renault 17 chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Renault 17: body, cut-outs and film

A Renault 17 vinyl wrap on the three-door hatchback means three large main panels. The car is 167.5 in (4,255 mm) long, so a full wrap uses about 49 ft (15 m) of film. Its mid-size body has two long doors that each need one large piece.

Renault 17 wrap ideas include working around the tailgate glass and the door lines. The tailgate carries the rear glass in it, so the film ends at the edge of the glass. Both long side doors are wrapped as one piece each.

To know how much vinyl to wrap a Renault 17, use the numbers for this one body style. The hatchback from 1972 to 1980 needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. Add extra when you choose chrome or patterned film, as those wraps take about 56 ft (17 m).

Questions about wrapping a Renault 17

How much vinyl does it take to wrap a Renault 17?

A Renault 17 full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. This figure covers the three-door hatchback body. Chrome or patterned film needs about 56 ft (17 m).

Can I wrap only the hood or the roof of a Renault 17?

Yes, you can wrap only the hood or the roof of a Renault 17. A partial wrap on this car also includes mirror caps. Paint protection film on the front end is another smaller job.

Is a Renault 17 hard to wrap?

The Renault 17 is not especially hard to wrap, but a few details add work. The tailgate has the rear glass in it, so the film must end at the edge of the glass. The two long side doors each take one large piece of film.

How many generations of the Renault 17 does this page cover?

This page covers one generation of the Renault 17. That generation was produced from 1972 to 1980. All wrap figures on this page refer to that body.