Wraps by car

Renault 25 wrap

This page covers the Renault 25 and the vinyl wrap work a full-size liftback from its single generation takes. The Renault 25 was produced from 1984 to 1992 in one generation, a five-door liftback also known as the R25. A full wrap of the body uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

1generations16.5 mof film for a full wrap

Renault 25, first generation, factory photo
Renault 25, first generation. Factory color shown.

Renault 25 wrap colors and ideas

  • Renault 25 black wrap
  • Renault 25 white wrap
  • Renault 25 gray wrap
  • Renault 25 silver wrap
  • Renault 25 red wrap
  • Renault 25 blue wrap
  • Renault 25 green wrap
  • Renault 25 yellow wrap
  • Renault 25 orange wrap
  • Renault 25 purple wrap
  • Renault 25 pink wrap
  • Renault 25 teal wrap
  • Renault 25 brown wrap
  • Renault 25 gold wrap
  • Renault 25 chrome wrap
  • Renault 25 color shift wrap
  • Renault 25 carbon fiber wrap
  • Renault 25 camo and patterned wrap

How much vinyl to wrap a Renault 25

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1992liftback (5 doors)185.6 in (4,715 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Renault 25 wrap cost factors

Renault 25 wrap cost depends on the size of the 185.6 in (4,715 mm) body, the wrap type, and how much trim removal the shop does. A partial wrap on the roof, hood, or mirror caps uses less labor and film than a full cover. Chrome delete on window trim and badges adds time for cutting, removing, and reinstalling small parts. The tailgate with the rear glass in it also changes how the back of the car is wrapped.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Renault 25 wraps by generation

Swipe sideways. Tap a card for the full description.

Renault 25, first generation, factory photo
Factory color shown

1984–1992 Renault 25 liftback (first generation)

1984–1992liftback (5 doors)185.6 in (4,715 mm)

The first generation Renault 25 spans 1984–1992 and is the only body style in this catalog, a five-door liftback with the R25 code. Paint age matters on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. A test spot shows whether the film will lift or stain the paint, so it is a required step before covering any R25.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Renault 25

On a Renault 25 a partial wrap covers the roof, hood, and mirror caps without the doors or tailgate. Chrome delete on this car means covering the window trim and badges with black film, which cleans up the side profile. Paint protection film (PPF) on the front end is clear film on the hood, fenders, and bumper that guards against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Renault 25: body, cut-outs and film

A Renault 25 vinyl wrap follows the long fastback profile and the large body panels of this 185.6 in (4,715 mm) liftback. The sides are long and straight, which helps film lay down without distortion, while the rear haunches need a steady hand. The tailgate carries the rear glass, so the wrap ends at the edge of the glass rather than wrapping around a separate trunk lid.

Renault 25 wrap ideas start with a full color change, but many owners also cover the roof, hood, mirror caps, or delete the chrome window trim. On this car the tailgate glass is part of the tailgate, so the film is trimmed to the edge of the glass and no cut-out is needed around a fixed window. Badges come off for a clean chrome delete, and door handles are removed to wrap behind them.

How much vinyl to wrap a Renault 25 depends on the film you choose and the condition of the 1984–1992 body. A plain color wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while a chrome or patterned film needs about 69 ft (21 m) because of pattern matching. The R25 did not change size between its model years, so the film estimate is the same for every standard car.

Questions about wrapping a Renault 25

How much vinyl does it take to wrap a Renault 25?

A Renault 25 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. That figure is for the first-generation liftback body from 1984–1992 with no chrome or pattern. Chrome or patterned film needs about 69 ft (21 m) because the pattern has to match across panels.

Can I wrap only the hood or the roof of a Renault 25?

Yes, a partial wrap of only the hood or the roof of a Renault 25 is a standard job. You can also wrap the mirror caps or add a chrome delete on the window trim and badges. Paint protection film (PPF) on the front end is another smaller job that covers the hood, fenders, and bumper in clear film.

Is a Renault 25 hard to wrap?

The Renault 25 is not a hard car to wrap, but the tailgate with the rear glass in it adds work at the back. The film ends at the edge of the glass, so the installer trims and tucks it there instead of wrapping a separate panel. The 185.6 in (4,715 mm) body is long, so a full wrap needs more film and more time than a smaller car.

How many generations of the Renault 25 does this page cover?

This page covers one generation of the Renault 25, produced from 1984 to 1992. The first generation is the only body style in the catalog, a five-door liftback with the R25 code. All wrap estimates on this page are for that single generation.