Wraps by car

Renault 30 wrap

The Renault 30 wrap page covers the first generation of this mid-size hatchback from 1975 to 1986. A full color change wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap. Chrome or patterned film needs about 64 ft (19.5 m).

1generations16 mof film for a full wrap

Renault 30, first generation, factory photo
Renault 30, first generation. Factory color shown.

Renault 30 wrap colors and ideas

  • Renault 30 black wrap
  • Renault 30 white wrap
  • Renault 30 gray wrap
  • Renault 30 silver wrap
  • Renault 30 red wrap
  • Renault 30 blue wrap
  • Renault 30 green wrap
  • Renault 30 yellow wrap
  • Renault 30 orange wrap
  • Renault 30 purple wrap
  • Renault 30 pink wrap
  • Renault 30 teal wrap
  • Renault 30 brown wrap
  • Renault 30 gold wrap
  • Renault 30 chrome wrap
  • Renault 30 color shift wrap
  • Renault 30 carbon fiber wrap
  • Renault 30 camo and patterned wrap

How much vinyl to wrap a Renault 30

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1986hatchback (5 doors)178.0 in (4,521 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Renault 30 wrap cost factors

Renault 30 wrap cost depends on the size of the car and the film you choose. The body is 178.0 in (4,521 mm) long, and a full wrap takes about 52 ft (16 m) of cast film. Chrome or patterned film uses about 64 ft (19.5 m), which changes the material part of the cost.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Renault 30 wraps by generation

Swipe sideways. Tap a card for the full description.

Renault 30, first generation, factory photo
Factory color shown

1975–1986 Renault 30 hatchback (first generation)

1975–1986hatchback (5 doors)178.0 in (4,521 mm)

The first generation Renault 30 was produced from 1975 to 1986 as a 5-door hatchback. Paint age matters on a car of these years: panels may be original or repainted. A test spot comes before a full wrap to check how the film bonds to the old paint.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Renault 30

The Renault 30 chrome delete covers the window trim and badges with black film. A partial wrap can also be the roof, hood, or mirror caps. Paint protection film (PPF), a clear film on the front end, protects the nose and headlights from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Renault 30: body, cut-outs and film

The Renault 30 vinyl wrap has to cover a 5-door hatchback body that is 178.0 in (4,521 mm) long. The single body style keeps the job straightforward, with no separate trunk lid to wrap. The large glass area in the tailgate is not wrapped, so the film ends cleanly at the edge of the glass.

Renault 30 wrap ideas include a tailgate where the rear glass is part of the panel. The film must be trimmed at the edge of the glass, which needs care around the defroster lines. Door handles, mirrors, and trim pieces come off for a cleaner installation.

How much vinyl to wrap a Renault 30 is the same for every year of the first generation. The catalog lists one body style, so the film estimate does not change between 1975 and 1986. An installer counts the same panels and cut-outs on every car.

Questions about wrapping a Renault 30

How much vinyl does it take to wrap a Renault 30?

A full wrap of a Renault 30 takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 64 ft (19.5 m).

Can I wrap only the hood or the roof of a Renault 30?

Yes, you can wrap only the hood or the roof of a Renault 30. A partial wrap can also cover the mirror caps, and a chrome delete covers the window trim and badges.

Is a Renault 30 hard to wrap?

The Renault 30 is not hard to wrap, but the tailgate adds work because the rear glass is set into the panel. The film must end at the edge of the glass, and the car is 178.0 in (4,521 mm) long. The 5-door body means more door edges than a coupe.

How many generations of the Renault 30 does this page cover?

This page covers one generation of the Renault 30. The first generation was produced from 1975 to 1986.