Wraps by car

Renault 9 wrap

The Renault 9 wrap page covers the first-generation sedan from 1981 to 1989 and estimates the vinyl wrap film for its body. A full wrap of this compact four-door car takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Choosing chrome or patterned film increases the estimate to about 56 ft (17 m). This page gives film amounts, preparation points, and wrap options for this single generation.

1generations14 mof film for a full wrap

Renault 9, first generation, factory photo
Renault 9, first generation. Factory color shown.

Renault 9 wrap colors and ideas

  • Renault 9 black wrap
  • Renault 9 white wrap
  • Renault 9 gray wrap
  • Renault 9 silver wrap
  • Renault 9 red wrap
  • Renault 9 blue wrap
  • Renault 9 green wrap
  • Renault 9 yellow wrap
  • Renault 9 orange wrap
  • Renault 9 purple wrap
  • Renault 9 pink wrap
  • Renault 9 teal wrap
  • Renault 9 brown wrap
  • Renault 9 gold wrap
  • Renault 9 chrome wrap
  • Renault 9 color shift wrap
  • Renault 9 carbon fiber wrap
  • Renault 9 camo and patterned wrap

How much vinyl to wrap a Renault 9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1989sedan (4 doors)159.8 in (4,060 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Renault 9 wrap cost factors

Renault 9 wrap cost depends mainly on the film amount of 46 ft (14 m) for a full wrap and on the prep work for a car from 1981 to 1989. Paint condition matters because old or repainted panels need more correction before the vinyl goes on. Chrome or patterned film raises the film amount to about 56 ft (17 m) and adds matching time. Removal of door handles, mirrors, and bumpers also changes the labor for this sedan.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: sedan (4 doors).

Renault 9 wraps by generation

Swipe sideways. Tap a card for the full description.

Renault 9, first generation, factory photo
Factory color shown

1981–1989 Renault 9 sedan (first generation)

1981–1989sedan (4 doors)159.8 in (4,060 mm)

The first-generation Renault 9 from 1981 to 1989 has paint that may be original or repainted, so a test spot comes before a full wrap. Old paint can lift when the vinyl is repositioned, especially on the hood and roof. A test spot on each major panel shows how the film releases without damaging the finish. Wrap the car only after you confirm the paint holds to the adhesive.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Renault 9

Partial wrap on a Renault 9 includes the roof, hood, and mirror caps as separate color change pieces. A chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These jobs use less film than a full wrap and leave the doors and fenders in the original color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Renault 9: body, cut-outs and film

A Renault 9 vinyl wrap works with a single body style: a four-door sedan with a length of 159.8 in (4,060 mm). The compact size keeps the main panels straightforward, so the film estimate stays near 46 ft (14 m). Door handles and the trunk area are simple shapes without deep recesses. The four doors add seams but no unusual stretching on the lower sections.

Renault 9 wrap ideas start with removing the door handles, mirrors, and badging before laying film on the doors and fenders. The window trim and badges need cut-outs unless you plan a chrome delete with black film. The front and rear bumpers are separate pieces that wrap more easily off the car. The roof and hood have clean edges that suit a partial wrap without extra trimming.

How much vinyl to wrap a Renault 9 depends on the one generation this page covers, produced from 1981 to 1989. A sedan body with four doors and no hatchback or wagon version keeps the full wrap close to the same film amount. The estimate of 46 ft (14 m) assumes a single color with no pattern matching. Chrome or patterned film raises the amount to about 56 ft (17 m), so count both figures when you order.

Questions about wrapping a Renault 9

How much vinyl does it take to wrap a Renault 9?

A full wrap of a Renault 9 takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the estimate goes up to about 56 ft (17 m) because of extra matching and waste. These figures cover the four-door sedan body from 1981 to 1989 with no major custom parts.

Can I wrap only the hood or the roof of a Renault 9?

Yes, you can wrap only the hood or the roof of a Renault 9 as a partial wrap. The roof and hood are listed as separate jobs for this car, along with mirror caps. A chrome delete on the window trim and badges is another partial option. Paint protection film on the front end is also a smaller job than a full wrap.

Is a Renault 9 hard to wrap?

A Renault 9 is not hard to wrap, but its age and four-door shape add some work. The sedan body is 159.8 in (4,060 mm) long, so you handle large panels on the roof and hood. Old paint from 1981 to 1989 may need a test spot before you proceed. Door handles, mirrors, and badges come off to avoid cut-outs around them.

How many generations of the Renault 9 does this page cover?

One generation of the Renault 9 is covered on this page. It is the first generation, produced from 1981 to 1989 as a four-door sedan. The page gives film estimates and wrap details for that single body.