Wraps by car

Renault Dokker wrap

A Renault Dokker wrap is a vinyl wrap that changes the color or finish of this minivan. The Dokker was produced from 2012 to 2020 in a single generation. A full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film, or about 76 ft (23 m) if the film is chrome or patterned.

1generations20 mof film for a full wrap

Renault Dokker, first generation, factory photo
Renault Dokker, first generation. Factory color shown.

Renault Dokker wrap colors and ideas

  • Dokker black wrap
  • Dokker white wrap
  • Dokker gray wrap
  • Dokker silver wrap
  • Dokker red wrap
  • Dokker blue wrap
  • Dokker green wrap
  • Dokker yellow wrap
  • Dokker orange wrap
  • Dokker purple wrap
  • Dokker pink wrap
  • Dokker teal wrap
  • Dokker brown wrap
  • Dokker gold wrap
  • Dokker chrome wrap
  • Dokker color shift wrap
  • Dokker carbon fiber wrap
  • Dokker camo and patterned wrap

How much vinyl to wrap a Renault Dokker

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2020van (5 doors)172.8 in (4,390 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Dokker wrap cost factors

Dokker wrap cost depends on the size of the van, the amount of film, and the work on the sliding doors and roof. The body is 172.8 in (4,390 mm) long and 71.4 in (1,814 mm) tall, so the roof is wrapped from a platform. Some trims have roof rails or fog lamps that add cut-outs or removal time.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (71.4 in (1,814 mm)): the roof is wrapped from a platform.

Dokker wraps by generation

Swipe sideways. Tap a card for the full description.

Renault Dokker, first generation, factory photo
Factory color shown

2012–2020 Dokker van (first generation)

2012–2020van (5 doors)172.8 in (4,390 mm)

The Renault Dokker first generation was built from 2012 to 2020 as a five-door van. Its sliding side doors are a key part of the wrap: the tracks stay bare and decide where the film is cut. The installer leaves the track area uncovered and trims the film along the edge of the track.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (71.4 in (1,814 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Dokker

A partial wrap on a Renault Dokker can cover the roof, hood, or mirror caps. Dokker chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Renault Dokker: body, cut-outs and film

A Renault Dokker vinyl wrap has to cover a van body with five doors and a length of 172.8 in (4,390 mm). The single body style is a tall van, so the roof adds a large area to the wrap. The exact amount of film depends on the width of the film and the way the installer cuts around the sliding doors.

Dokker wrap ideas start with the sliding side doors, because the door tracks stay bare and the film is cut along them. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Some trims have fog lamps in the front bumper, so the bumper film needs cut-outs for them.

How much vinyl to wrap a Dokker depends on the generation, and the Dokker has only one generation from 2012 to 2020. For that body, a full wrap takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 76 ft (23 m) because the material is less flexible.

Questions about wrapping a Renault Dokker

How much vinyl does it take to wrap a Renault Dokker?

A Renault Dokker needs about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl for a full wrap. If the film is chrome or patterned, the amount rises to about 76 ft (23 m). These figures are for the newest body, which is the only generation of the Dokker.

Are the sliding doors of a Dokker wrapped?

Yes, the sliding doors of a Dokker are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can still slide freely. This is a standard part of wrapping any van with sliding doors.

Can I wrap only the hood or the roof of a Dokker?

Yes, you can wrap only the hood or the roof of a Dokker. A partial wrap often covers the roof, hood, or mirror caps. Chrome delete is another option that covers the window trim and badges, while paint protection film covers the front end.

Is a Dokker hard to wrap?

A Dokker is not the easiest car to wrap because of its tall body and sliding doors. The roof is 71.4 in (1,814 mm) high, so the installer needs a platform to reach it. The sliding door tracks must stay bare, and some trims have roof rails or fog lamps that require extra cutting.