Wraps by car

Renault Floride wrap

The Renault Floride wrap guide covers the 1958 to 1968 two-door convertible and coupe. This catalog lists one generation for the car. A full vinyl wrap of the Floride body uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

Renault Floride, first generation, factory photo
Renault Floride, first generation. Factory color shown.

Renault Floride wrap colors and ideas

  • Floride black wrap
  • Floride white wrap
  • Floride gray wrap
  • Floride silver wrap
  • Floride red wrap
  • Floride blue wrap
  • Floride green wrap
  • Floride yellow wrap
  • Floride orange wrap
  • Floride purple wrap
  • Floride pink wrap
  • Floride teal wrap
  • Floride brown wrap
  • Floride gold wrap
  • Floride chrome wrap
  • Floride color shift wrap
  • Floride carbon fiber wrap
  • Floride camo and patterned wrap

How much vinyl to wrap a Renault Floride

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1958–1968convertible, coupe (2 doors)167.9 in (4,265 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Floride wrap cost factors

Floride wrap cost depends on the body panels, the film type and the labor to remove trim. The car has two long side doors and a compact rear section. A chrome or patterned film uses about 49 ft (15 m) instead of the base 44 ft (13.5 m). The shop measures the exact car before quoting.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Floride wraps by generation

Swipe sideways. Tap a card for the full description.

Renault Floride, first generation, factory photo
Factory color shown

1958–1968 Floride convertible, coupe (first generation)

1958–1968convertible, coupe (2 doors)167.9 in (4,265 mm)

The open top of the first generation Floride is not covered with vinyl film. A fabric top is left uncovered and the film ends where the top begins. A folding hard top is wrapped as separate panels of its own. The installer trims the film carefully around the top openings.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Floride

A partial wrap on a Renault Floride works for the roof, hood or mirror caps. A Floride chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that can be applied to the front end. These smaller jobs are done without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Renault Floride: body, cut-outs and film

The Renault Floride vinyl wrap must follow the two body styles and the 167.9 in (4,265 mm) length. The two long side doors are each wrapped as one large piece of film. The rear deck and front fenders are moderate panels for a car of this size. The compact body keeps the wrap straightforward for a two-door classic.

Floride wrap ideas start with the parts that need cut-outs or come off. Door handles, mirrors, badges and the fuel filler are removed or cut around for a clean install. The fabric top on the convertible is not wrapped and the film ends where the top begins. A folding hard top is wrapped as panels of its own.

How much vinyl to wrap a Floride depends on the body style. Both the convertible and the coupe share the same 167.9 in (4,265 mm) overall length. The two body styles of the first generation take the same amount of cast film. A wrap shop will add film for door jambs and hidden edges.

Questions about wrapping a Renault Floride

How much vinyl does it take to wrap a Renault Floride?

A full wrap of a Renault Floride takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 49 ft (15 m). The estimate covers both body styles of the first generation.

Is the top of a Floride wrapped?

The top of a Floride is not wrapped when it is a fabric top. The film ends where the fabric top begins. A folding hard top is wrapped as panels of its own.

Which Floride body takes more film?

Both the Floride convertible and coupe take the same amount of film. The film estimate is about 44 ft (13.5 m) for either body style. The two body styles share the same length and panel layout.

Can I wrap only the hood or the roof of a Floride?

You can wrap only the hood or the roof of a Floride. A partial wrap is also done on the mirror caps. Paint protection film (PPF) is an option for the front end only.