Wraps by car

Renault Fregate wrap

A Renault Fregate wrap changes the look of a 1951–1960 French sedan or convertible with vinyl wrap. The catalog covers one generation, the first, across both body styles. A full wrap of the newest body takes about 49 ft (15 m) for the convertible to 57 ft (17.5 m) for the sedan.

1generations15 mof film for a full wrap

Renault Fregate, first generation, factory photo
Renault Fregate, first generation. Factory color shown.

Renault Fregate wrap colors and ideas

  • Fregate black wrap
  • Fregate white wrap
  • Fregate gray wrap
  • Fregate silver wrap
  • Fregate red wrap
  • Fregate blue wrap
  • Fregate green wrap
  • Fregate yellow wrap
  • Fregate orange wrap
  • Fregate purple wrap
  • Fregate pink wrap
  • Fregate teal wrap
  • Fregate brown wrap
  • Fregate gold wrap
  • Fregate chrome wrap
  • Fregate color shift wrap
  • Fregate carbon fiber wrap
  • Fregate camo and patterned wrap

How much vinyl to wrap a Renault Fregate

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1951–1960convertible, sedan (2 or 4 doors)185.0 in (4,700 mm)about 49 ft (15 m) for the convertible to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Fregate wrap cost factors

Fregate wrap cost depends on the film area, the film type and how much trim you remove. A sedan needs more material than a convertible, about 57 ft (17.5 m) against 49 ft (15 m). The 60-inch (1.52 m) roll width also affects how the installer cuts each panel. Cast film is the right choice for the long body lines.

  • Film for a full wrap: about 49 ft (15 m) for the convertible to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: convertible, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Fregate wraps by generation

Swipe sideways. Tap a card for the full description.

Renault Fregate, first generation, factory photo
Factory color shown

1951–1960 Fregate convertible, sedan (first generation)

1951–1960convertible, sedan (2 or 4 doors)185.0 in (4,700 mm)

The open top of the first generation Fregate is not wrapped. On a convertible the fabric top stays bare and the film ends where the metal body begins. If you have a folding hard top, treat each panel as its own film area and wrap it separately.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 49 ft (15 m) for the convertible to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Fregate

A partial wrap on a Renault Fregate can cover the roof, hood or mirror caps. Chrome delete on this car means covering the window trim and badges with black film. Paint protection film (PPF) on the front end protects the nose and leading edges. These smaller jobs leave most of the body unwrapped.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Renault Fregate: body, cut-outs and film

A Renault Fregate vinyl wrap covers a long body of 185.0 in (4,700 mm) in either style. The sedan has two or four doors, and the convertible adds a top that no installer wraps. That means the film area differs between the two shapes, and the sedan needs the higher estimate. On the convertible only the metal body panels receive film.

Fregate wrap ideas begin with the parts you remove or cut around on a 1951–1960 car. Door handles, badges, trim and mirror caps come off before the film goes on. The straight body sides and simple panels help a clean install. Wrapping the long hood is a job on its own because of its size.

How much vinyl to wrap a Fregate depends on the body style you own. A first generation convertible needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. A sedan of the same generation takes about 57 ft (17.5 m). If you want chrome or patterned film, allow up to about 66 ft (20 m).

Questions about wrapping a Renault Fregate

How much vinyl does it take to wrap a Renault Fregate?

It takes about 49 ft (15 m) for the convertible and 57 ft (17.5 m) for the sedan to wrap a Renault Fregate. These figures are for 60-inch (1.52 m) cast film on the newest body. If you choose chrome or patterned film, allow up to about 66 ft (20 m).

Is the top of a Fregate wrapped?

No, the top of a Fregate is not wrapped. The fabric top on the convertible stays bare because film does not stick to it. The film ends where the metal body panels begin. A folding hard top is the only top you can wrap.

Which Fregate body takes more film?

The sedan takes more film than the convertible on a Renault Fregate. A full wrap of the sedan needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The convertible needs about 49 ft (15 m) because its top is not covered.

Can I wrap only the hood or the roof of a Fregate?

Yes, you can wrap only the hood or the roof of a Fregate. A partial wrap can cover the roof, hood or mirror caps. Chrome delete is another smaller job that covers window trim and badges. Paint protection film (PPF) on the front end is also available.