Wraps by car

Renault Twingo wrap

This page covers the Renault Twingo wrap across all three generations. The newest body is the third generation, built from 2014 to now. It is a five-door hatchback in the mini class. A full wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

3generations14.5 mof film for a full wrap

Renault Twingo, third generation, factory photo
Renault Twingo, third generation. Factory color shown.

Renault Twingo wrap colors and ideas

  • Twingo black wrap
  • Twingo white wrap
  • Twingo gray wrap
  • Twingo silver wrap
  • Twingo red wrap
  • Twingo blue wrap
  • Twingo green wrap
  • Twingo yellow wrap
  • Twingo orange wrap
  • Twingo purple wrap
  • Twingo pink wrap
  • Twingo teal wrap
  • Twingo brown wrap
  • Twingo gold wrap
  • Twingo chrome wrap
  • Twingo color shift wrap
  • Twingo carbon fiber wrap
  • Twingo camo and patterned wrap

How much vinyl to wrap a Renault Twingo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowhatchback (5 doors)141.5 in (3,595 mm) to 142.3 in (3,614 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2007–2014hatchback (3 doors)141.8 in (3,602 mm) to 145.2 in (3,687 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1992–2012hatchback (3 doors)135.0 in (3,430 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Twingo wrap cost factors

Twingo wrap cost depends mainly on the size of the car and the film you pick. The first generation needs about 41 ft (12.5 m) of film, while the second and third generations need about 48 ft (14.5 m) of 60-inch (1.52 m) material. Chrome or patterned film raises the amount to about 51 ft (15.5 m) on the first generation and 56 ft (17 m) on the newer ones. Labor time is higher on cars with fog lamp cut-outs or a charge port door.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

Twingo wraps by generation

Swipe sideways. Tap a card for the full description.

Renault Twingo, third generation, factory photo
Factory color shown

2014–now Twingo hatchback (third generation)

2014–nowhatchback (5 doors)141.5 in (3,595 mm) to 142.3 in (3,614 mm)

The third-generation Renault Twingo sometimes has a panoramic glass roof. That glass roof is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails, and only the metal parts around the glass get vinyl. If your Twingo has this roof, the roof area uses much less film than a full metal roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Renault Twingo, second generation, factory photo
Factory color shown

2007–2014 Twingo hatchback (second generation)

2007–2014hatchback (3 doors)141.8 in (3,602 mm) to 145.2 in (3,687 mm)

The second-generation Renault Twingo was restyled in 2012. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. A 2007 to 2011 Twingo needs different front and rear bumper patterns than a 2012 to 2014 Twingo. Always confirm the production year before ordering pre-cut film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Renault Twingo, first generation, factory photo
Factory color shown

1992–2012 Twingo hatchback (first generation)

1992–2012hatchback (3 doors)135.0 in (3,430 mm)

The first-generation Renault Twingo was built from 1992 to 2012, so paint age varies widely. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. Older paint can be more fragile when the film is repositioned. A professional installer will check paint adhesion before covering any panel.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Twingo

A Twingo chrome delete covers the window trim and badges with black film. Partial wrap jobs on this car include the hood, mirror caps, and the roof on cars without the glass panel. Paint protection film (PPF) is often applied as clear film on the front end. These smaller jobs use less material than a full color change wrap.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Renault Twingo: body, cut-outs and film

A Renault Twingo vinyl wrap follows the compact size of this mini hatchback. The current five-door body is 141.5 in (3,595 mm) to 142.3 in (3,614 mm) long, and the older three-door bodies are within a few inches of that. Shorter panels mean fewer large sheets, but many small trim pieces add time. The tailgate and doors are large enough for one-piece film application on most panels.

Twingo wrap ideas start with the parts that need extra work. Every trim has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The fog lamps in the front bumper require cut-outs in the bumper film. On plug-in and electric versions, the charge port door is wrapped as a small piece of its own. Some trims have a panoramic glass roof that is not wrapped, and the film ends at the roof rails.

How much vinyl to wrap a Twingo depends on the generation you own. The first generation needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. The second and third generations need about 48 ft (14.5 m) of the same width. Chrome or patterned film for any Twingo adds roughly 8 ft (2.5 m) to the estimate.

Questions about wrapping a Renault Twingo

How much vinyl does it take to wrap a Renault Twingo?

A full wrap of the newest Renault Twingo takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. That figure covers the third-generation five-door hatchback. If you choose chrome or patterned film, plan for about 56 ft (17 m) instead.

Can the roof of a Twingo be wrapped?

Yes, the roof of a Twingo can be wrapped on every generation. On cars with a panoramic glass roof, the glass itself is not wrapped, and the film ends at the roof rails. The first-generation Twingo did not offer a glass roof, so its metal roof panel can be fully wrapped.

Which years of the Twingo take the same film cuts?

Film cuts match by production years and restyling years. The first-generation Twingo (1992–2012) has one body style, but paint may differ. The second generation was restyled in 2012, so 2007–2011 and 2012–2014 cars need different bumper and light cuts. The third generation was restyled in 2019, so 2014–2018 and 2019–now Twingos also take different patterns.

Can I wrap only the hood or the roof of a Twingo?

Yes, you can wrap only the hood or the roof of a Twingo. Partial wrap jobs on this car include the hood, mirror caps, and the roof on cars without the glass panel. Chrome delete is another small job that covers window trim and badges. Clear paint protection film on the front end is also a standalone option.