A color change to an iMAX8 EV wrapped in black starts with choosing the finish you want the panels to show. Matte black hides fingerprints and softens the tall sides, while gloss black gives a deep wet look. Satin sits between matte and gloss with a slight sheen that is easy to keep clean. The finish changes the look more than the shade, so look at real samples against the body.
The factory paint of the iMAX8 EV stays untouched under a wrap because the film is applied dry to clean panels. Seams are placed where panels meet, along the hood edge, around the doors, and over the rear corners. On this van, the sliding door tracks stay bare, and the film is cut along them so the doors open freely. A good installer trims the film cleanly around the charge port door as a small piece of its own.
A black wrap on the iMAX8 EV is removable when the film is in sound condition and the paint was factory-finished. Removal leaves the original paint as it was under the film, though aged or repainted areas can lift with the adhesive. Hand wash the wrapped van with a soft mitt and a mild car shampoo, and avoid automatic brushes. The wrap needs no wax or sealant, just regular rinsing to keep the edges clean.


