Wraps by car

Roewe iMAX8 EV wrap

The Roewe iMAX8 EV wrap page covers this electric van in its first generation, produced from 2020 onward. A full vinyl wrap of the newest body takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 85 ft (26 m).

1generations22.5 mof film for a full wrap

Roewe iMAX8 EV, first generation, factory photo
Roewe iMAX8 EV, first generation. Factory color shown.

Roewe iMAX8 EV wrap colors and ideas

  • iMAX8 EV black wrap
  • iMAX8 EV white wrap
  • iMAX8 EV gray wrap
  • iMAX8 EV silver wrap
  • iMAX8 EV red wrap
  • iMAX8 EV blue wrap
  • iMAX8 EV green wrap
  • iMAX8 EV yellow wrap
  • iMAX8 EV orange wrap
  • iMAX8 EV purple wrap
  • iMAX8 EV pink wrap
  • iMAX8 EV teal wrap
  • iMAX8 EV brown wrap
  • iMAX8 EV gold wrap
  • iMAX8 EV chrome wrap
  • iMAX8 EV color shift wrap
  • iMAX8 EV carbon fiber wrap
  • iMAX8 EV camo and patterned wrap

How much vinyl to wrap a Roewe iMAX8 EV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowvan (5 doors)197.5 in (5,016 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

iMAX8 EV wrap cost factors

The iMAX8 EV wrap cost depends on the film type, the number of panels covered, and the van's size. A full wrap of this 197.5 in (5,016 mm) long body needs about 74 ft (22.5 m) of standard film. Chrome or patterned film raises the material amount to about 85 ft (26 m). The tall roof and sliding door tracks also add labor.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (70.2 in (1,782 mm)): the roof is wrapped from a platform.

iMAX8 EV wraps by generation

Swipe sideways. Tap a card for the full description.

Roewe iMAX8 EV, first generation, factory photo
Factory color shown

2020–now iMAX8 EV van (first generation)

2020–nowvan (5 doors)197.5 in (5,016 mm)

The first-generation Roewe iMAX8 EV (2020–now) has sliding side doors where the tracks stay bare and decide where the film is cut. This body style is a five-door van with a length of 197.5 in (5,016 mm). Its height of 70.2 in (1,782 mm) calls for a platform when wrapping the roof.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (70.2 in (1,782 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on an iMAX8 EV

The Roewe iMAX8 EV can receive a partial wrap on the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) in clear is applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Roewe iMAX8 EV: body, cut-outs and film

A Roewe iMAX8 EV vinyl wrap covers a long, tall van body: 197.5 in (5,016 mm) long and 70.2 in (1,782 mm) high. The five-door van has large, flat side panels, but the height means installers work from a platform for the roof. The sliding side doors require cuts along the bare tracks.

For iMAX8 EV wrap ideas, the sliding side door tracks stay bare, so the film is cut along them. The electric charge port door is wrapped as a small piece of its own. The tall body at 70.2 in (1,782 mm) means the roof is wrapped from a platform.

To figure how much vinyl to wrap an iMAX8 EV, the first generation (2020–now) is the only body in this catalog. Its length of 197.5 in (5,016 mm) and height of 70.2 in (1,782 mm) drive the material estimate. A standard color change uses about 74 ft (22.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Roewe iMAX8 EV

How much vinyl does it take to wrap a Roewe iMAX8 EV?

A full wrap of a Roewe iMAX8 EV takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast vinyl. This figure applies to a standard color change on the newest body. Using chrome or patterned film increases the amount to about 85 ft (26 m).

Are the sliding doors of an iMAX8 EV wrapped?

The sliding doors on a Roewe iMAX8 EV are wrapped, but the tracks stay bare. Installers cut the film along the track lines for a clean look. That leaves the tracks functional and the door panels covered.

Can I wrap only the hood or the roof of an iMAX8 EV?

Yes, you can wrap only the hood or the roof of an iMAX8 EV. A partial wrap on this van often covers the roof, hood, and mirror caps. You can also choose a chrome delete on the window trim and badges or paint protection film on the front end.

Is an iMAX8 EV hard to wrap?

Yes, an iMAX8 EV adds work because of its size and details. The body is 197.5 in (5,016 mm) long and 70.2 in (1,782 mm) high, so the roof is wrapped from a platform. The sliding side doors need cuts along the bare tracks, and the charge port door is wrapped as a separate piece.