Wraps by car

Roewe RX3 Pro wrap

The Roewe RX3 Pro wrap page covers this compact SUV from its first generation, produced from 2021 to now. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 67 ft (20.5 m). This page explains the film amounts, the parts that need extra work, and the cost factors.

1generations18 mof film for a full wrap

Roewe RX3 Pro, first generation, factory photo
Roewe RX3 Pro, first generation. Factory color shown.

Roewe RX3 Pro wrap colors and ideas

  • RX3 Pro black wrap
  • RX3 Pro white wrap
  • RX3 Pro gray wrap
  • RX3 Pro silver wrap
  • RX3 Pro red wrap
  • RX3 Pro blue wrap
  • RX3 Pro green wrap
  • RX3 Pro yellow wrap
  • RX3 Pro orange wrap
  • RX3 Pro purple wrap
  • RX3 Pro pink wrap
  • RX3 Pro teal wrap
  • RX3 Pro brown wrap
  • RX3 Pro gold wrap
  • RX3 Pro chrome wrap
  • RX3 Pro color shift wrap
  • RX3 Pro carbon fiber wrap
  • RX3 Pro camo and patterned wrap

How much vinyl to wrap a Roewe RX3 Pro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)174.7 in (4,437 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

RX3 Pro wrap cost factors

RX3 Pro wrap cost depends on the film type, the size of the vehicle, and the labor for the body details. A full wrap on this SUV uses about 59 ft (18 m) of 60-inch (1.52 m) cast film, or more for chrome or patterned film. The tailgate glass and the many curves of the bumpers add time to the installation. A partial wrap or chrome delete uses less film but still requires careful trimming.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

RX3 Pro wraps by generation

Swipe sideways. Tap a card for the full description.

Roewe RX3 Pro, first generation, factory photo
Factory color shown

2021–now RX3 Pro SUV (first generation)

2021–nowSUV (5 doors)174.7 in (4,437 mm)

The first-generation Roewe RX3 Pro, built from 2021 to now, has a five-door SUV body that is 174.7 in (4,437 mm) long. This size means a full wrap takes about 59 ft (18 m) of 60-inch (1.52 m) film. The body has a tailgate with the rear glass in it, so the installer must cut the film to the glass edge. The large side panels and roof are the main areas that use film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an RX3 Pro

A partial wrap on an RX3 Pro can cover the roof, hood, or mirror caps with a contrasting color. Chrome delete for this car covers the window trim and badges with black film to change the look. Clear paint protection film (PPF) is applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap but still require precise fitting.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Roewe RX3 Pro: body, cut-outs and film

A Roewe RX3 Pro vinyl wrap suits the five-door SUV body with its large continuous panels. The length of 174.7 in (4,437 mm) means a standard roll of 60-inch (1.52 m) film can cover most sections without piecing. The tall roof and doors add area, so a full wrap uses about 59 ft (18 m) of film. Planning the wrap around the rear tailgate glass reduces waste.

RX3 Pro wrap ideas include covering the body in a solid color or a patterned film like carbon fiber. The tailgate has the rear glass set into it, so the film must end cleanly at the edge of the glass. Door handles, mirrors, and badges are removed or masked for a neat edge. The front bumper and grille area need relief cuts to follow the contours.

When counting how much vinyl to wrap an RX3 Pro, all generations in the catalog are the same first-generation body. The SUV shape and the 174.7 in (4,437 mm) length set the base film need at about 59 ft (18 m) of 60-inch (1.52 m) film. If you choose chrome or textured film, plan for about 67 ft (20.5 m) because the pattern must be matched. Extra film is also needed for the roof and the front end if you wrap those areas separately.

Questions about wrapping a Roewe RX3 Pro

How much vinyl does it take to wrap a Roewe RX3 Pro?

About 59 ft (18 m) of 60-inch (1.52 m) cast film is needed to wrap a Roewe RX3 Pro. If you use chrome or patterned film, the amount goes up to about 67 ft (20.5 m). These figures cover the full body of the newest first-generation model.

Can I wrap only the hood or the roof of an RX3 Pro?

Yes, you can wrap only the hood or the roof of an RX3 Pro. A partial wrap may cover the roof, hood, or mirror caps. These smaller areas use less film and are a way to add a contrasting color.

Is an RX3 Pro hard to wrap?

An RX3 Pro is moderately hard to wrap because of its tailgate that includes the rear glass. The installer must cut the film precisely at the glass edge. The SUV's size of 174.7 in (4,437 mm) also means more film and longer panels to handle.

How many generations of the RX3 Pro does this page cover?

This page covers one generation of the RX3 Pro. The first generation has been produced from 2021 to now. All wrap data on this page refer to that generation.