Wraps by car

Roewe RX3 wrap

The Roewe RX3 wrap page covers one generation of this SUV, produced from 2017 to 2021. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 67 ft (20.5 m).

1generations18 mof film for a full wrap

Roewe RX3, first generation, factory photo
Roewe RX3, first generation. Factory color shown.

Roewe RX3 wrap colors and ideas

  • Roewe RX3 black wrap
  • Roewe RX3 white wrap
  • Roewe RX3 gray wrap
  • Roewe RX3 silver wrap
  • Roewe RX3 red wrap
  • Roewe RX3 blue wrap
  • Roewe RX3 green wrap
  • Roewe RX3 yellow wrap
  • Roewe RX3 orange wrap
  • Roewe RX3 purple wrap
  • Roewe RX3 pink wrap
  • Roewe RX3 teal wrap
  • Roewe RX3 brown wrap
  • Roewe RX3 gold wrap
  • Roewe RX3 chrome wrap
  • Roewe RX3 color shift wrap
  • Roewe RX3 carbon fiber wrap
  • Roewe RX3 camo and patterned wrap

How much vinyl to wrap a Roewe RX3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–2021SUV (5 doors)173.5 in (4,408 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Roewe RX3 wrap cost factors

Roewe RX3 wrap cost depends on the size of the car and the film you choose. A full wrap uses about 59 ft (18 m) of cast film, or about 67 ft (20.5 m) for chrome or patterned film. The number of panels, including the tailgate with its rear glass, affects the labor. Partial jobs like the roof or hood use less film.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Roewe RX3 wraps by generation

Swipe sideways. Tap a card for the full description.

Roewe RX3, first generation, factory photo
Factory color shown

2017–2021 Roewe RX3 SUV (first generation)

2017–2021SUV (5 doors)173.5 in (4,408 mm)

The first generation Roewe RX3 was produced from 2017 to 2021 as a five-door SUV. Its length of 173.5 in (4,408 mm) means a full wrap uses about 59 ft (18 m) of standard film. The body has a tailgate with the rear glass in it, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Roewe RX3

A partial wrap on a Roewe RX3 can cover the roof, hood, or mirror caps. Roewe RX3 chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Roewe RX3: body, cut-outs and film

A Roewe RX3 vinyl wrap deals with an SUV body that is 173.5 in (4,408 mm) long with five doors. This size means the film must be cut and stretched across large roof and door panels. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

Roewe RX3 wrap ideas often start with the tailgate, where the rear glass is part of the panel. The film ends at the edge of the glass, leaving only the painted metal surface to be wrapped. Door handles, mirror caps, and badges are smaller parts that can be covered or removed for a clean finish. A chrome delete on the window trim is another way to change the look.

If you want to know how much vinyl to wrap a Roewe RX3, the answer depends on which film you pick. A standard color change needs about 59 ft (18 m), while chrome or patterned film needs about 67 ft (20.5 m). The body has one generation, so the film count does not change between years.

Questions about wrapping a Roewe RX3

How much vinyl does it take to wrap a Roewe RX3?

A Roewe RX3 wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 67 ft (20.5 m). This figure covers the full body of the newest generation.

Can I wrap only the hood or the roof of a Roewe RX3?

Yes, you can wrap only the hood or the roof of a Roewe RX3. Partial wrap jobs can include the roof, hood, or mirror caps. You can also do a chrome delete on window trim and badges, or apply clear paint protection film to the front end.

Is a Roewe RX3 hard to wrap?

A Roewe RX3 is not especially hard to wrap, but the tailgate adds work because the rear glass is in it. The film must end at the edge of the glass, so the installer trims carefully around that line. The SUV body is 173.5 in (4,408 mm) long, which means handling large panels.

How many generations of the Roewe RX3 does this page cover?

This page covers one generation of the Roewe RX3, produced from 2017 to 2021. It is the only generation in the catalog.