Wraps by car

Roewe i5 wrap

A Roewe i5 wrap covers the sedan with vinyl wrap and gives it a new color or finish. The catalog shows one generation of this car, built from 2018 to now. A full wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 66 ft (20 m).

1generations17.5 mof film for a full wrap

Roewe i5, first generation, factory photo
Roewe i5, first generation. Factory color shown.

Roewe i5 wrap colors and ideas

  • Roewe i5 black wrap
  • Roewe i5 white wrap
  • Roewe i5 gray wrap
  • Roewe i5 silver wrap
  • Roewe i5 red wrap
  • Roewe i5 blue wrap
  • Roewe i5 green wrap
  • Roewe i5 yellow wrap
  • Roewe i5 orange wrap
  • Roewe i5 purple wrap
  • Roewe i5 pink wrap
  • Roewe i5 teal wrap
  • Roewe i5 brown wrap
  • Roewe i5 gold wrap
  • Roewe i5 chrome wrap
  • Roewe i5 color shift wrap
  • Roewe i5 carbon fiber wrap
  • Roewe i5 camo and patterned wrap

How much vinyl to wrap a Roewe i5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowsedan (4 doors)181.1 in (4,601 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Roewe i5 wrap cost factors

A Roewe i5 wrap cost is set by the size of the car and the film you pick. The sedan needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full color change. Chrome or patterned film adds material, about 66 ft (20 m), and takes more time to align. The front bumper and door handles add labor that changes the final cost.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).
  • Restyled in 2021: bumpers and lights differ between the versions, and so do the film cuts.

Roewe i5 wraps by generation

Swipe sideways. Tap a card for the full description.

Roewe i5, first generation, factory photo
Factory color shown

2018–now Roewe i5 sedan (first generation)

2018–nowsedan (4 doors)181.1 in (4,601 mm)

The first generation of the Roewe i5 runs from 2018 to now and is the only one in this catalog. A restyling in 2021 changed the front and rear bumpers and the lights on the sedan. Film cut for a pre-2021 car does not fit a 2021 or later body. The length of 181.1 in (4,601 mm) is the same, but the end panels differ.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Roewe i5

A partial wrap on a Roewe i5 can cover the roof, hood, or mirror caps in a different color. Chrome delete uses black film on the window trim and badges for a darker look. Paint protection film (PPF) is a clear layer applied to the front end to shield the paint from stone chips. These jobs use less film than a full wrap and change one part of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Roewe i5: body, cut-outs and film

A Roewe i5 vinyl wrap has to follow one four-door sedan body style. The car is 181.1 in (4,601 mm) long, so film is cut for two doors on each side and a full rear deck. The roof and pillars add surface that a partial wrap can leave out. A full wrap covers the front and rear bumpers as well.

Roewe i5 wrap ideas work best when the film is cut around door handles, mirrors, and the grille. The front bumper comes off for a clean wrap around the air intakes. The rear bumper can stay on, but the tail lights are easier to wrap when removed. The antenna base is masked or taken off for the roof.

How much vinyl to wrap a Roewe i5 depends on which model you have. The generation runs from 2018 to now, and a restyling in 2021 changed the bumpers and lights. A shop measures the car before cutting because film from one year does not fit the other. The length stayed at 181.1 in (4,601 mm), but shapes differ at the ends.

Questions about wrapping a Roewe i5

How much vinyl does it take to wrap a Roewe i5?

Yes, a Roewe i5 takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film needs about 66 ft (20 m) because of extra material for alignment. A shop measures the car and adds a small allowance for waste.

Which years of the Roewe i5 take the same film cuts?

The Roewe i5 from 2018 to 2020 takes one set of film cuts, and 2021 to now takes another. The restyling in 2021 changed the bumpers and lights, so panels differ. A shop checks the year before cutting to avoid gaps.

Can I wrap only the hood or the roof of a Roewe i5?

Yes, a Roewe i5 can have just the hood or the roof wrapped as a partial job. Mirror caps and other small parts can also be done on their own. Chrome delete covers the window trim and badges with black film. Paint protection film is another option for the front end.

Is a Roewe i5 hard to wrap?

Yes, a Roewe i5 is a mid-size sedan that is not too hard to wrap, but some parts add work. The front bumper needs to come off for a clean wrap around the air intakes. The door handles and mirrors are removed or masked. The 181.1 in (4,601 mm) length means longer film panels that one person cannot handle alone.