Wraps by car

Smart #3 wrap

This page covers the Smart #3 wrap, the single generation built since 2022, and the vinyl wrap a full body takes. The #3 is a five-door SUV with a length of 173.2 in (4,400 mm). A full wrap of the newest body needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the total to about 57 ft (17.5 m).

1generations15 mof film for a full wrap

Smart #3, first generation, factory photo
Smart #3, first generation. Factory color shown.

Smart #3 wrap colors and ideas

  • #3 black wrap
  • #3 white wrap
  • #3 gray wrap
  • #3 silver wrap
  • #3 red wrap
  • #3 blue wrap
  • #3 green wrap
  • #3 yellow wrap
  • #3 orange wrap
  • #3 purple wrap
  • #3 pink wrap
  • #3 teal wrap
  • #3 brown wrap
  • #3 gold wrap
  • #3 chrome wrap
  • #3 color shift wrap
  • #3 carbon fiber wrap
  • #3 camo and patterned wrap

How much vinyl to wrap a Smart #3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)173.2 in (4,400 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

#3 wrap cost factors

The #3 wrap cost depends on the size of the SUV, the film you choose, and the work the body demands. The car is 173.2 in (4,400 mm) long, and a full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) with chrome or patterned film. Parking sensors, cameras, a sunroof, and a charge port door all add cutting time. A styling kit on some trims adds more separate pieces to wrap.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

#3 wraps by generation

Swipe sideways. Tap a card for the full description.

Smart #3, first generation, factory photo
Factory color shown

2022–now #3 SUV (first generation)

2022–nowSUV (5 doors)173.2 in (4,400 mm)

The first generation Smart #3, built from 2022 to now, has a glass roof on every trim that is never wrapped. The film ends at the roof rails, so the roof stays dark whatever the color of the film. The rest of the body is a five-door SUV with bumpers, a tailgate, and side panels to cover. This generation is the only one in the catalog, so all wrap estimates refer to this body.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a sunroof: the roof film is cut around its opening.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a #3

A partial wrap on a Smart #3 can cover the hood, mirror caps, or tailgate without wrapping the whole SUV. A chrome delete for the #3 means covering the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to protect the paint from stone chips. These smaller jobs use less film and take less time than a full color change wrap.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Smart #3: body, cut-outs and film

A Smart #3 vinyl wrap covers an SUV body with five doors and a length of 173.2 in (4,400 mm). The roof is mostly glass on every trim, so the film ends at the roof rails and the glass is left unwrapped. The tailgate includes the rear glass, and the film stops at the edge of that glass. The bumpers and sills on some trims have a styling kit, which means more separate pieces to wrap.

For #3 wrap ideas, plan cut-outs for every parking sensor in the bumpers and every camera lens in the body. The charge port door is an electric car feature that gets wrapped as a small piece of its own. A sunroof on every trim means the roof film is cut around its opening, while the panoramic glass roof is not wrapped at all. Some trims have a styling kit on the bumpers and sills, adding more pieces to the job.

Knowing how much vinyl to wrap a #3 starts with the car's one generation, built from 2022 to now. The body has stayed the same size at 173.2 in (4,400 mm), so the film estimate is about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the total to about 57 ft (17.5 m). A single generation means no older or newer body changes the count.

Questions about wrapping a Smart #3

How much vinyl does it take to wrap a Smart #3?

A Smart #3 wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full body. If you use chrome or patterned film, the total is about 57 ft (17.5 m). The estimate comes from the body length of 173.2 in (4,400 mm) and the SUV's five-door shape.

Can the roof of a #3 be wrapped?

No, the roof of a #3 cannot be wrapped because every trim has a panoramic glass roof. The glass is not wrapped, and the film ends at the roof rails. The roof stays dark as it is, whatever the color of the wrap.

Can I wrap only the hood or the roof of a #3?

Yes, you can wrap only the hood or the roof of a #3 as a partial job. A partial wrap can cover the hood, mirror caps, or tailgate. The roof itself is not wrapped because it is glass, but you can combine the hood with other small parts.

Is a #3 hard to wrap?

A #3 is not the easiest car to wrap because of its sensors, cameras, and glass areas. Every trim has parking sensors in the bumpers and cameras in the body, so the film must be cut around each one. The panoramic glass roof and sunroof mean the roof film is cut around openings or not applied at all. The styling kit on some trims adds more separate pieces, and the charge port door is an extra small piece.