Wraps by car

Smart Roadster wrap

The Smart Roadster wrap page covers the first generation built from 2003 to 2006. This single generation includes the convertible body style with two doors. A full wrap of this newest body uses about 33 ft (10 m) of 60-inch (1.52 m) cast film. The vinyl wrap options for this mini car are detailed below.

1generations10 mof film for a full wrap

Smart Roadster, first generation, factory photo
Smart Roadster, first generation. Factory color shown.

Smart Roadster wrap colors and ideas

  • Roadster black wrap
  • Roadster white wrap
  • Roadster gray wrap
  • Roadster silver wrap
  • Roadster red wrap
  • Roadster blue wrap
  • Roadster green wrap
  • Roadster yellow wrap
  • Roadster orange wrap
  • Roadster purple wrap
  • Roadster pink wrap
  • Roadster teal wrap
  • Roadster brown wrap
  • Roadster gold wrap
  • Roadster chrome wrap
  • Roadster color shift wrap
  • Roadster carbon fiber wrap
  • Roadster camo and patterned wrap

How much vinyl to wrap a Smart Roadster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2006convertible (2 doors)134.9 in (3,427 mm)about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)

Roadster wrap cost factors

The Roadster wrap cost depends on the area covered and the film chosen. A full wrap of the 134.9 in (3,427 mm) body uses about 33 ft (10 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires more material at about 41 ft (12.5 m). Preparation and removal of parts also influence the final cost.

  • Film for a full wrap: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Roadster wraps by generation

Swipe sideways. Tap a card for the full description.

Smart Roadster, first generation, factory photo
Factory color shown

2003–2006 Roadster convertible (first generation)

2003–2006convertible (2 doors)134.9 in (3,427 mm)

The first generation Roadster has a soft top that stays uncovered during a wrap. The fabric top is not wrapped, and the film ends where the top begins. For a folding hard top, the installer wraps each panel separately. This keeps the open top functional and the wrap lines clean.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Roof, hood, chrome delete and PPF on a Roadster

A partial wrap on the Roadster can cover the hood, mirror caps, or rear deck. Roadster chrome delete covers the window trim and badges with black film. Paint protection film (clear film) is applied to the front end to guard against stone chips. These options allow you to change the look without a full wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Smart Roadster: body, cut-outs and film

The Smart Roadster vinyl wrap follows the small convertible body measuring 134.9 in (3,427 mm) in length. This compact size means the wrap uses less film than on larger cars. The two-door convertible shape has simple side panels and a short rear deck. The open top area is not wrapped, which keeps the film application straightforward.

Roadster wrap ideas should account for the removal of door handles and badges for a clean edge. The mirror caps are small and can be wrapped separately for a contrasting color. The front and rear bumpers need careful stretching around their curves. The fuel filler flap is another part that comes off for a neat finish.

To know how much vinyl to wrap a Roadster, compare the first generation with other models from Smart. The Roadster is longer than the Fortwo but shorter than the Forfour. The 2003–2006 body has the same wrap film amount for every year. No other generations exist in the catalog for this model.

Questions about wrapping a Smart Roadster

How much vinyl does it take to wrap a Smart Roadster?

A full wrap of a Smart Roadster takes about 33 ft (10 m) of 60-inch (1.52 m) cast film. This estimate is for the newest body from 2003 to 2006 and includes the main panels. Chrome or patterned film would require about 41 ft (12.5 m). The small size of the car keeps material use low.

Is the top of a Roadster wrapped?

No, the top of a Roadster is not wrapped. The fabric top is left uncovered, and the vinyl film ends where the top begins. If the car has a folding hard top, each panel is wrapped separately. This approach protects the top mechanism and keeps the film from peeling.

Can I wrap only the hood or the roof of a Roadster?

Yes, you can wrap only the hood or the rear deck of a Roadster. A partial wrap can cover the hood, mirror caps, or rear deck. This is a smaller job that changes the look without a full wrap. The roof is not wrapped because the Roadster has an open top.

Is a Roadster hard to wrap?

The Roadster is not hard to wrap for an experienced installer. Its small size and simple body panels make it easier than many cars. The main challenge is the convertible top, which must be masked off. The rear deck and bumper curves need careful stretching of the vinyl.