A Stavic wrapped in green starts with finish and film choice before any panel is prepped. Matte green makes the 202.0 in (5,130 mm) van body look soft and hides small surface imperfections. Gloss green reflects light and shows the shape of the tall roof and the sliding door cut lines. A satin green sits halfway and works well on a minivan that gets daily use. The color change wrap covers the factory paint completely, but the door tracks stay unpainted because film cannot survive the rollers.

The factory paint under a green wrap matters because scratches or chips can show through thin film. Deep surface damage is repaired before wrapping so the color sits flat on every panel. Seams are placed at body edges and along the sliding door tracks to keep the wrap tidy. The front bumper has fog lamp cut-outs and some trims have parking sensors that need precise film cuts. Roof rails, when fitted, come off before the roof is wrapped or the film is cut around their base.

A green wrap on the Stavic is removable and leaves the factory paint intact when removed by hand. Because the wrap is a film over paint, you wash it by hand with mild soap and avoid automatic brushes. Pressure washing is possible at low pressure and from a distance so edges do not lift. The film is cut around the sliding door tracks, so hand washing lets you clean those areas without peeling the cut line. Wax or ceramic coatings for vinyl keep matte and gloss finishes clean longer.