Wraps by car

SsangYong Stavic wrap

The SsangYong Stavic wrap page covers the first generation van produced from 2013 to 2016. A full wrap of this tall minivan uses about 77 ft (23.5 m) of 60-inch (1.52 m) cast vinyl film. If you choose a chrome or patterned film, order about 87 ft (26.5 m) to allow for pattern matching. The catalog shows one generation and the key measurements a wrap installer needs.

1generations23.5 mof film for a full wrap

SsangYong Stavic, first generation, factory photo
SsangYong Stavic, first generation. Factory color shown.

SsangYong Stavic wrap colors and ideas

  • Stavic black wrap
  • Stavic white wrap
  • Stavic gray wrap
  • Stavic silver wrap
  • Stavic red wrap
  • Stavic blue wrap
  • Stavic green wrap
  • Stavic yellow wrap
  • Stavic orange wrap
  • Stavic purple wrap
  • Stavic pink wrap
  • Stavic teal wrap
  • Stavic brown wrap
  • Stavic gold wrap
  • Stavic chrome wrap
  • Stavic color shift wrap
  • Stavic carbon fiber wrap
  • Stavic camo and patterned wrap

How much vinyl to wrap a SsangYong Stavic

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2016van (5 doors)202.0 in (5,130 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Stavic wrap cost factors

Stavic wrap cost depends on the size of the body, the film chosen and the extra labor for details. The van is 202.0 in (5,130 mm) long and 71.5 in (1,815 mm) tall, so a full wrap uses about 77 ft (23.5 m) of film. Sliding door tracks, roof rails on some trims and parking sensors on some trims add cutting time. A chrome delete on the bright moldings or a partial wrap will change the material and work from a full wrap.

  • Film for a full wrap: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (71.5 in (1,815 mm)): the roof is wrapped from a platform.

Stavic wraps by generation

Swipe sideways. Tap a card for the full description.

SsangYong Stavic, first generation, factory photo
Factory color shown

2013–2016 Stavic van (first generation)

2013–2016van (5 doors)202.0 in (5,130 mm)

The first generation SsangYong Stavic from 2013 to 2016 has sliding side doors where the tracks stay bare and decide where the film is cut. Some trims have parking sensors in the bumpers, so the film is cut around each sensor. Every trim has fog lamps in the front bumper, which require cut-outs in the bumper film. The tall body of 71.5 in (1,815 mm) means the roof is wrapped from a platform.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (71.5 in (1,815 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on a Stavic

A partial wrap on a SsangYong Stavic can cover the roof, the hood or the mirror caps only. A Stavic chrome delete covers the window trim, the decorative moldings and the badges with black film. Paint protection film (PPF) is clear and goes on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a SsangYong Stavic: body, cut-outs and film

The SsangYong Stavic vinyl wrap must suit a long van body of 202.0 in (5,130 mm). This 5-door minivan has large flat panels that take film well, but the tall sides and long roof add material. Because the body is tall at 71.5 in (1,815 mm), installers work from a platform to lay the roof film evenly.

Stavic wrap ideas start with the sliding side doors, whose tracks stay bare. The film is cut along each track so the doors keep working. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Every trim has bright decorative moldings that stay bright next to the film unless a chrome delete covers them.

How much vinyl to wrap a Stavic depends on which generation you own, but the catalog covers only the first generation from 2013 to 2016. A full color change on this long van takes about 77 ft (23.5 m) of 60-inch (1.52 m) film. For chrome or patterned film, the estimate rises to about 87 ft (26.5 m). The tall body and sliding door tracks mean more trimming than on a sedan.

Questions about wrapping a SsangYong Stavic

How much vinyl does it take to wrap a SsangYong Stavic?

A full wrap of a SsangYong Stavic takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast vinyl film. That figure is for the first generation body produced from 2013 to 2016. If you use chrome or patterned film, plan on about 87 ft (26.5 m).

Are the sliding doors of a Stavic wrapped?

No, the sliding doors of a Stavic are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close. That leaves the track area in the original paint color.

Can the roof of a Stavic be wrapped?

Yes, the roof of a Stavic can be wrapped. The body is 71.5 in (1,815 mm) tall, so an installer wraps it from a platform. Some trims have a sunroof, and the film is cut around its opening, while some trims have roof rails that come off first.

Can I wrap only the hood or the roof of a Stavic?

Yes, you can wrap only the hood or the roof of a Stavic. A partial wrap can also cover the mirror caps. A chrome delete is another smaller job that covers the window trim, decorative moldings and badges.