Wraps by car

SsangYong Tivoli wrap

The SsangYong Tivoli wrap page covers this compact SUV from 2015 to the present, one generation. A full vinyl wrap of the newest Tivoli takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 66 ft (20 m).

1generations17.5 mof film for a full wrap

SsangYong Tivoli, first generation, factory photo
SsangYong Tivoli, first generation. Factory color shown.

SsangYong Tivoli wrap colors and ideas

  • Tivoli black wrap
  • Tivoli white wrap
  • Tivoli gray wrap
  • Tivoli silver wrap
  • Tivoli red wrap
  • Tivoli blue wrap
  • Tivoli green wrap
  • Tivoli yellow wrap
  • Tivoli orange wrap
  • Tivoli purple wrap
  • Tivoli pink wrap
  • Tivoli teal wrap
  • Tivoli brown wrap
  • Tivoli gold wrap
  • Tivoli chrome wrap
  • Tivoli color shift wrap
  • Tivoli carbon fiber wrap
  • Tivoli camo and patterned wrap

How much vinyl to wrap a SsangYong Tivoli

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowSUV (5 doors)165.2 in (4,195 mm) to 166.3 in (4,225 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Tivoli wrap cost factors

Tivoli wrap cost depends on how much film the car needs, which is about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The labor time is affected by the roof rails that must be removed or cut around, and by cut-outs for fog lamps on some trims. A chrome delete of the bright moldings adds extra film and time. If you choose chrome or patterned film, the amount goes up to about 66 ft (20 m).

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

Tivoli wraps by generation

Swipe sideways. Tap a card for the full description.

SsangYong Tivoli, first generation, factory photo
Factory color shown

2015–now Tivoli SUV (first generation)

2015–nowSUV (5 doors)165.2 in (4,195 mm) to 166.3 in (4,225 mm)

The first generation SsangYong Tivoli runs from 2015 to the present, with a restyling in 2019 that changed the bumpers and lights. Film cut for one version does not fit the other, so a wrap kit must match the production year. The overall body length is 165.2 in (4,195 mm) before the restyling and 166.3 in (4,225 mm) after it.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Tivoli

A partial wrap on the SsangYong Tivoli can cover the roof, hood, or mirror caps as separate jobs. A Tivoli chrome delete uses black film on the window trim, decorative moldings, and badges. Paint protection film (PPF) is clear film applied to the front end to protect the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a SsangYong Tivoli: body, cut-outs and film

A SsangYong Tivoli vinyl wrap covers a five-door SUV with a length from 165.2 in (4,195 mm) to 166.3 in (4,225 mm). The body is a manageable size for a wrap, similar to other compact SUVs. Its flat sides and simple shape help the film lay down without excessive stretching. The tailgate is a separate panel with its own film piece.

Tivoli wrap ideas start with the rear: the tailgate has the rear glass in it, so the film ends at the edge of the glass. Every trim has roof rails, and they come off before the roof is wrapped or the film is cut along them. Some trims have bright decorative moldings that stay bright next to the film unless a chrome delete covers them. Some trims have fog lamps in the front bumper, so the bumper film gets cut-outs.

When you figure how much vinyl to wrap a Tivoli, the first generation is the only one in the catalog, produced from 2015 to now. The restyling in 2019 changed the bumpers and lights, but the main body panels stayed the same. Because the overall length changed only slightly, from 165.2 in (4,195 mm) to 166.3 in (4,225 mm), the film amount is nearly identical for both versions.

Questions about wrapping a SsangYong Tivoli

How much vinyl does it take to wrap a SsangYong Tivoli?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a SsangYong Tivoli, and chrome or patterned film needs about 66 ft (20 m). This is for the newest body of the first generation, which is the only one in the catalog.

Which years of the Tivoli take the same film cuts?

The first generation Tivoli is from 2015 to now, but the 2019 restyling changed the bumpers and lights, so film cuts differ before and after that year. The main body panels are the same, but a kit for a 2016 model will not fit a 2020 model without changes.

Can I wrap only the hood or the roof of a Tivoli?

Yes, a partial wrap of the hood or the roof is an option for the Tivoli, along with mirror caps. For the roof, the roof rails must be removed or the film cut along them. A chrome delete of the window trim, decorative moldings, and badges is also possible.

Is a Tivoli hard to wrap?

A SsangYong Tivoli is not the hardest car to wrap, but it has some extra work. The tailgate has the rear glass in it, so the film ends at the glass edge. Every trim has roof rails that must be removed or cut around. Some trims have fog lamps that require cut-outs in the bumper film.