Wraps by car

SsangYong Kyron wrap

The SsangYong Kyron wrap page covers the first generation SUV sold from 2005 to 2016. A full vinyl wrap of the newest Kyron body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Choose a chrome or patterned film and the job calls for roughly 72 ft (22 m). This page lists the body details that shape the install.

1generations19 mof film for a full wrap

SsangYong Kyron, first generation, factory photo
SsangYong Kyron, first generation. Factory color shown.

SsangYong Kyron wrap colors and ideas

  • Kyron black wrap
  • Kyron white wrap
  • Kyron gray wrap
  • Kyron silver wrap
  • Kyron red wrap
  • Kyron blue wrap
  • Kyron green wrap
  • Kyron yellow wrap
  • Kyron orange wrap
  • Kyron purple wrap
  • Kyron pink wrap
  • Kyron teal wrap
  • Kyron brown wrap
  • Kyron gold wrap
  • Kyron chrome wrap
  • Kyron color shift wrap
  • Kyron carbon fiber wrap
  • Kyron camo and patterned wrap

How much vinyl to wrap a SsangYong Kyron

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2016SUV (5 doors)183.5 in (4,660 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Kyron wrap cost factors

A Kyron wrap cost is driven by the film type, the height of the body, and the amount of film the installer uses for the chosen finish. The stock estimate for this SUV runs about 62 ft (19 m) of 60-inch (1.52 m) cast film, while chrome or patterned film pushes the total to about 72 ft (22 m). The roof adds labor because it must be wrapped from a platform at a height of 69.1 in (1,755 mm). The final quote also moves with cut-outs for fog lamps, sensors, and the bright moldings depending on the trim.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.
  • Restyled in 2007: bumpers and lights differ between the versions, and so do the film cuts.

Kyron wraps by generation

Swipe sideways. Tap a card for the full description.

SsangYong Kyron, first generation, factory photo
Factory color shown

2005–2016 Kyron SUV (first generation)

2005–2016SUV (5 doors)183.5 in (4,660 mm)

The first-generation SsangYong Kyron was built from 2005 to 2016 in one five-door SUV body at 183.5 in (4,660 mm) long. The restyling in 2007 changed the bumpers and lights, so film cut for one version does not fit the other. A full wrap on the newer face uses the same amount of film as on the earlier one, about 62 ft (19 m) of cast vinyl. Only the front and rear treatment differs, not the main body panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Kyron

A partial wrap on a Kyron can cover the roof, hood, and mirror caps for a clean accent without touching the whole body. A Kyron chrome delete wraps the window trim, decorative moldings, and badges in black film to change the brightwork. Paint protection film (PPF) is an option too: clear film goes on the front end to guard the hood, bumper, and fenders from stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a SsangYong Kyron: body, cut-outs and film

A SsangYong Kyron vinyl wrap has to suit a tall five-door SUV body with a length of 183.5 in (4,660 mm) and a height of 69.1 in (1,755 mm). The roof is large and sits high, so installers work from a platform to reach it safely. The tailgate carries the rear glass, which means the film ends cleanly at the edge of the glass. The body has few compound curves, but the tall sides add extra square footage compared with a sedan.

Kyron wrap ideas start with the details that call for cut-outs or removal before film goes on. Every trim has fog lamps in the front bumper, so the bumper film needs cut-outs around each lamp. Some trims have parking sensors, and the film is cut around each sensor. Roof rails on some trims come off before the roof is wrapped, or the film is cut along them. Every trim keeps bright decorative moldings, and those stay bright next to the film unless the wrap includes a chrome delete.

Knowing how much vinyl to wrap a Kyron depends on which version of the first generation you have. The 2007 restyling changed the bumpers and lights, so pre-cut film for one version will not fit the other. Still, a full wrap of any Kyron falls close to the 62 ft (19 m) figure used for the newest body. Only the bumper shapes and lamp openings change the waste factor between the two versions.

Questions about wrapping a SsangYong Kyron

How much vinyl does it take to wrap a SsangYong Kyron?

A SsangYong Kyron takes about 62 ft (19 m) of 60-inch (1.52 m) cast film for a full wrap. Choose a chrome or patterned film and the job needs about 72 ft (22 m) instead. The estimate covers the whole body of the newest Kyron version, including the roof.

Can the roof of a Kyron be wrapped?

Yes, the roof of a Kyron can be wrapped. The roof is one of the larger flat panels on the SUV, and a contrasting color is a straightforward partial job. On a Kyron with a sunroof, the film is cut around the opening, and roof rails either come off first or get cut along. Because the body stands 69.1 in (1,755 mm) tall, installers wrap the roof from a platform.

Which years of the Kyron take the same film cuts?

The Kyron was made from 2005 to 2016, and the same film cuts fit all versions built before 2007. After the 2007 restyling, the bumpers and lights changed, so film cut for the pre-facelift car does not fit the later one and vice versa.

Can I wrap only the hood or the roof of a Kyron?

Yes, you can wrap only the hood or the roof of a Kyron. Both are listed as partial jobs, along with mirror caps. The roof is a good standalone panel because it is large and easy to reach from a platform, and the hood is often wrapped in a different color for a simple accent.