A Crossover SX4 wrapped in black is a full color change over the factory paint. The finish makes the biggest difference, with matte and satin looking flat and gloss looking deep and reflective. Pick the film brand after that, as air-release liners and conformability vary between brands. Decide last whether to wrap the whole body or only selected panels like the roof and hood.
Factory paint on a Crossover SX4 is the base for the film, so clean and inspect every panel before the wrap. Seams are placed at the edges of panels, and on this car the tailgate seam follows the edge of the rear glass. On a second-generation car with roof rails, the rails come off before the roof is wrapped or the film is cut along them. Bodies with parking sensors or cameras get precise cut-outs in the film around each sensor and lens.
A black wrap on a Crossover SX4 is removable when the time comes to change the color or return the car. Hand washing with mild soap and a soft mitt keeps the film clean without lifting the edges. Avoid automatic brushes and pressure washers aimed at the seams. A matte or satin film is cleaned with a wrap-safe detailer that does not add gloss.

