A Crossover SX4 wrapped in purple begins with a finish choice because matte, satin, gloss and metallic reads differently on the SUV's upright panels. The color change then moves to choosing a film line from the 16 brands shown above, and each line has its own stock of purple. After that you decide between a full wrap and a partial job such as a roof or hood in purple. The number of pieces the film is cut in changes with the body and the trim details you want covered.
The factory paint under the wrap sets the base for a purple color change because the film is translucent in some lights and the original shade shows at the edges. Seams are planned on the panel lines of the Crossover SX4 so the purple finish looks like one continuous surface. On the second generation, every trim has roof rails and the roof film is cut around them unless they are removed first. On the first generation, the hatchback and sedan bodies share the same tailgate design but the film amounts differ by about 2 ft (0.6 m).
The purple film is removable and leaves the original paint intact when it is taken off by a skilled installer. Hand washing the Crossover SX4 with a soft mitt keeps the edges of the film down and the matte or gloss surface clean. A pressure washer is fine on a low setting held at a distance, but never aim it at a seam or an edge. The film needs no wax or sealant, so the maintenance routine stays simple.

