Wraps by car

Volkswagen Arteon R wrap

A Volkswagen Arteon R wrap covers the mid-size liftback or wagon with cast vinyl wrap film. The first generation runs from 2020 to now and has had one restyling, in 2020. A full wrap of the newest body takes about 57 ft (17.5 m) for the liftback and up to 59 ft (18 m) for the wagon.

1generations17.5 mof film for a full wrap

Volkswagen Arteon R, first generation, factory photo
Volkswagen Arteon R, first generation. Factory color shown.

Volkswagen Arteon R wrap colors and ideas

  • Arteon R black wrap
  • Arteon R white wrap
  • Arteon R gray wrap
  • Arteon R silver wrap
  • Arteon R red wrap
  • Arteon R blue wrap
  • Arteon R green wrap
  • Arteon R yellow wrap
  • Arteon R orange wrap
  • Arteon R purple wrap
  • Arteon R pink wrap
  • Arteon R teal wrap
  • Arteon R brown wrap
  • Arteon R gold wrap
  • Arteon R chrome wrap
  • Arteon R color shift wrap
  • Arteon R carbon fiber wrap
  • Arteon R camo and patterned wrap

How much vinyl to wrap a Volkswagen Arteon R

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowliftback, wagon (5 doors)191.6 in (4,866 mm)about 57 ft (17.5 m) for the liftback to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

Arteon R wrap cost factors

Arteon R wrap cost depends on the size of the body and the number of panels you cover. A full wrap of the liftback uses about 57 ft (17.5 m) of film, and the wagon uses up to 59 ft (18 m). The roof, hood, and large side panels are the biggest single pieces. A wrap with chrome or patterned film can use up to about 76 ft (23 m), so material is a larger share of the cost.

  • Film for a full wrap: about 57 ft (17.5 m) for the liftback to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).
  • Body: liftback, wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2020: bumpers and lights differ between the versions, and so do the film cuts.

Arteon R wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen Arteon R, first generation, factory photo
Factory color shown

2020–now Arteon R liftback, wagon (first generation)

2020–nowliftback, wagon (5 doors)191.6 in (4,866 mm)

The first generation Arteon R was restyled in 2020, with new bumpers and lights. Film cut for a pre-2020 version will not fit the post-2020 panels. The body is 191.6 in (4,866 mm) long, and both the liftback and wagon have five doors. A full wrap uses about 57 ft (17.5 m) for the liftback and up to 59 ft (18 m) for the wagon.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) for the liftback to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on an Arteon R

A partial wrap on an Arteon R can cover the roof, hood, or mirror caps without wrapping the whole car. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that goes on the front end to prevent stone chips. These smaller jobs use less film than a full wrap, so material costs are lower.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Volkswagen Arteon R: body, cut-outs and film

A Volkswagen Arteon R vinyl wrap starts with a body length of 191.6 in (4,866 mm). The five-door liftback and wagon have long roof and side panels, so a wrap uses more film than a smaller car. The tailgate has the rear glass in it, so the film ends at the edge of the glass. A 60-inch (1.52 m) cast film is the right width for the roof and hood.

Arteon R wrap ideas for this car begin with the tailgate, where the rear glass sits in the metal panel. The film must be trimmed to the edge of the glass, with a clean line around the window. Door handles, mirrors, and badges are removed or cut around carefully. The bumpers have many curves and air intakes that need relief cuts and heat.

How much vinyl to wrap an Arteon R depends on the body style and the restyling year. The liftback takes about 57 ft (17.5 m), and the wagon takes up to 59 ft (18 m). The 2020 restyling changed the bumpers and lights, so film cut for one version does not fit the other. If you add chrome or patterned film, plan for up to about 76 ft (23 m).

Questions about wrapping a Volkswagen Arteon R

How much vinyl does it take to wrap a Volkswagen Arteon R?

About 57 ft (17.5 m) of vinyl for the liftback and up to 59 ft (18 m) for the wagon, using 60-inch (1.52 m) cast film. A full wrap of the newest Arteon R body takes that amount, measured from the film estimate. If you add chrome or patterned film, plan for up to about 76 ft (23 m).

Which years of the Arteon R take the same film cuts?

All years of the first generation, 2020 to now, take the same film cuts for the body panels. The 2020 restyling changed the bumpers and lights, so film cut for one version does not fit the other. The tailgate and doors are unchanged between the pre- and post-restyling versions.

Which Arteon R body takes more film?

The wagon takes more film than the liftback, up to about 59 ft (18 m) compared to 57 ft (17.5 m). The wagon has a longer roof and rear side panels, which adds the extra material. Both bodies use 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of an Arteon R?

Yes, you can wrap only the hood or the roof of an Arteon R. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges, and paint protection film (PPF) protects the front end. These jobs are smaller than a full wrap and use less film.