Wraps by car

Volkswagen ID.4 wrap

The Volkswagen ID.4 wrap page covers the first-generation electric SUV from 2020 to now. A full vinyl wrap of this body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Add about 77 ft (23.5 m) if you choose chrome or patterned film. The ID.4 is a five-door SUV that shares its body with no other generation.

1generations18.5 mof film for a full wrap

Volkswagen ID.4, first generation, factory photo
Volkswagen ID.4, first generation. Factory color shown.

Volkswagen ID.4 wrap colors and ideas

  • ID.4 black wrap
  • ID.4 white wrap
  • ID.4 gray wrap
  • ID.4 silver wrap
  • ID.4 red wrap
  • ID.4 blue wrap
  • ID.4 green wrap
  • ID.4 yellow wrap
  • ID.4 orange wrap
  • ID.4 purple wrap
  • ID.4 pink wrap
  • ID.4 teal wrap
  • ID.4 brown wrap
  • ID.4 gold wrap
  • ID.4 chrome wrap
  • ID.4 color shift wrap
  • ID.4 carbon fiber wrap
  • ID.4 camo and patterned wrap

How much vinyl to wrap a Volkswagen ID.4

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)180.4 in (4,582 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

ID.4 wrap cost factors

ID.4 wrap cost depends on the film area you cover and the film type you choose. The full body needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film adds up to about 77 ft (23.5 m). A partial wrap of the hood or roof uses much less film. The taller body adds some labor because the roof is wrapped from a platform.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (72.9 in (1,852 mm)): the roof is wrapped from a platform.

ID.4 wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen ID.4, first generation, factory photo
Factory color shown

2020–now ID.4 SUV (first generation)

2020–nowSUV (5 doors)180.4 in (4,582 mm)

The glass roof on the first-generation Volkswagen ID.4 is not wrapped. If your ID.4 has the panoramic glass roof, the film ends at the roof rails and the glass stays its original color. Some trims have a sunroof instead, and the roof film is cut around its opening. Whatever the film color, the glass panel stays dark.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (72.9 in (1,852 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on an ID.4

For an ID.4 chrome delete, the shop wraps the window trim and badges in black film. A partial wrap can cover the hood, mirror caps, or the roof on cars without the glass panel. Paint protection film (PPF) is clear film applied to the front end. These jobs are smaller than a full wrap and still change the look or protect the paint.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Volkswagen ID.4: body, cut-outs and film

A Volkswagen ID.4 vinyl wrap covers a 180.4 in (4,582 mm) long SUV. The tall body stands 72.9 in (1,852 mm) high, so the roof is wrapped from a platform. Since it is an electric car, the charge port door is wrapped as a small piece of its own. The five-door body has no long bed or extended panels, which keeps the film layout straightforward.

For ID.4 wrap ideas, start with the details that need cut-outs or come off. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Every trim has cameras in the body, and the film is cut around each lens. Some trims have fog lamps in the front bumper, which need cut-outs in the bumper film. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

If you want to know how much vinyl to wrap an ID.4, the first generation is the only one in this catalog. The body has not changed its dimensions since 2020, so the film estimate stays the same. For a full wrap, plan about 61 ft (18.5 m) of standard cast film, or about 77 ft (23.5 m) for chrome or patterned film. Changes between model years are limited to trim details, not the basic shape.

Questions about wrapping a Volkswagen ID.4

How much vinyl does it take to wrap a Volkswagen ID.4?

A full vinyl wrap of a Volkswagen ID.4 takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 77 ft (23.5 m). These figures cover the whole body including the charge port door and the roof. The estimate is based on the newest body, which is the only generation in this catalog.

Can the roof of an ID.4 be wrapped?

Yes, the roof of an ID.4 can be wrapped unless it has the panoramic glass roof. Some trims have a glass panel, and glass is not wrapped so the roof stays its original color. If your ID.4 has a sunroof, the roof film is cut around its opening. Cars without any glass roof can have the roof fully wrapped.

Can I wrap only the hood or the roof of an ID.4?

Yes, you can wrap only the hood or the roof of an ID.4 as a partial wrap. The roof wrap is possible on cars without the glass panel. A partial wrap may also include mirror caps or a chrome delete for window trim and badges. Paint protection film is another smaller job applied to the front end.

Is an ID.4 hard to wrap?

An ID.4 is not especially hard to wrap, but some details add work. Every trim has parking sensors and cameras, so the film is cut around each one. Some trims have fog lamps and a sunroof that require extra cut-outs. The tall body means the roof is wrapped from a platform.