Wraps by car

Volkswagen ID.3 wrap

A Volkswagen ID.3 wrap changes the look of this compact electric hatchback in one piece of work. The catalog covers the first generation, produced from 2019 to now. A full color change on the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations16.5 mof film for a full wrap

Volkswagen ID.3, first generation, factory photo
Volkswagen ID.3, first generation. Factory color shown.

Volkswagen ID.3 wrap colors and ideas

  • ID.3 black wrap
  • ID.3 white wrap
  • ID.3 gray wrap
  • ID.3 silver wrap
  • ID.3 red wrap
  • ID.3 blue wrap
  • ID.3 green wrap
  • ID.3 yellow wrap
  • ID.3 orange wrap
  • ID.3 purple wrap
  • ID.3 pink wrap
  • ID.3 teal wrap
  • ID.3 brown wrap
  • ID.3 gold wrap
  • ID.3 chrome wrap
  • ID.3 color shift wrap
  • ID.3 carbon fiber wrap
  • ID.3 camo and patterned wrap

How much vinyl to wrap a Volkswagen ID.3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowhatchback (5 doors)167.7 in (4,260 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

ID.3 wrap cost factors

ID.3 wrap cost depends on the size of the car, the film type, and the amount of cut work. The ID.3 is 167.7 in (4,260 mm) long and takes about 54 ft (16.5 m) of 60-inch (1.52 m) film for a full wrap. A chrome or patterned film uses about 64 ft (19.5 m) because the pattern must be matched. The rear spoiler, cameras, and charge port door add time, but the hatchback body has no complex front bumper.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2023: bumpers and lights differ between the versions, and so do the film cuts.

ID.3 wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen ID.3, first generation, factory photo
Factory color shown

2019–now ID.3 hatchback (first generation)

2019–nowhatchback (5 doors)167.7 in (4,260 mm)

The first generation Volkswagen ID.3 was produced from 2019 to now as a five-door hatchback. It was restyled in 2023 with new bumpers and lights, so wrap kits are not interchangeable between the early and late versions. The body length is 167.7 in (4,260 mm), and a full wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a rear spoiler: it is wrapped as a piece of its own.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an ID.3

ID.3 chrome delete and partial wrap jobs cover the roof, hood, mirror caps, or rear spoiler. A chrome delete wraps the window trim and badges in black film. Paint protection film (PPF) is a clear film on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Volkswagen ID.3: body, cut-outs and film

The Volkswagen ID.3 vinyl wrap follows a five-door hatchback shape with a length of 167.7 in (4,260 mm). The roof, hood, doors, fenders, and rear quarters are the large panels that take most of the film. This compact body has fewer deep curves than a coupe, so the wrap goes on with fewer relief cuts.

ID.3 wrap ideas have to work around the rear spoiler, the cameras, and the charge port door. The rear spoiler is wrapped as a piece of its own because it sits separate from the tailgate. Every trim has cameras in the body, so the film is cut around each lens. The tailgate includes the rear glass, and the film ends at the edge of the glass.

Knowing how much vinyl to wrap an ID.3 means using the figures for one generation built from 2019 to now. The estimate for a full wrap is about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film takes about 64 ft (19.5 m) because the pattern repeats and needs matching. The restyling in 2023 changed the bumpers and lights, so film cut for one version does not fit the other.

Questions about wrapping a Volkswagen ID.3

How much vinyl does it take to wrap a Volkswagen ID.3?

Yes, a full wrap of a Volkswagen ID.3 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl wrap. That figure covers the exterior of the newest body without a patterned film. A chrome or patterned film takes about 64 ft (19.5 m) because the pattern must be matched.

Which years of the ID.3 take the same film cuts?

All years of the first generation ID.3, from 2019 to now, use the same basic body cuts. The restyling in 2023 changed the bumpers and lights, so those specific panels need new patterns for later cars.

Can I wrap only the hood or the roof of an ID.3?

Yes, you can wrap only the hood or the roof of an ID.3. The roof and hood are separate panels that take a small amount of film. Other partial jobs are the mirror caps, the rear spoiler, and the window trim.

Is an ID.3 hard to wrap?

An ID.3 is not hard to wrap, but it has details that add work. The rear spoiler is wrapped as a separate piece, and every trim has cameras that need cut-outs around each lens. The charge port door is also wrapped as a small piece of its own. Its length of 167.7 in (4,260 mm) is normal for a compact hatchback.