KPMF vs 3M sets a range split between gloss and matte against one spread over five finishes. KPMF lists 163 films in the site catalog, 156 of them vinyl wrap. 3M lists 112 vinyl films, all in Wrap Film Series 2080.
Key facts
- KPMF lists 112 films in VWS IV and 43 in Classic Vehicle Wrap - VWS 1.
- KPMF has 72 matte films in the catalog, against 17 from 3M.
- 3M lists 26 satin films in the catalog, while KPMF lists two.
- KPMF covers 17 color groups in the catalog, and 3M covers 16.
KPMF vinyl wrap series in the catalog
KPMF vinyl wrap sits in two main series in the catalog. VWS IV holds 112 films, and Classic Vehicle Wrap - VWS 1 holds 43. One further film sits under High Gloss, and seven films are paint protection film.
The KPMF paint protection films are filed under Polyurethane / Paint Protection Films. 3M keeps all 112 of its catalog films in one series, Wrap Film Series 2080. A comparison of KPMF vs 3M 2080 is therefore mainly a comparison with VWS IV.
Gloss and matte balance in each range
KPMF splits its range nearly evenly between gloss and matte. The catalog lists 79 gloss and 72 matte KPMF films, with two satin and one high gloss. A matte color change has a deep choice in this range.
3M spreads its catalog films more widely across five finishes. The catalog lists 40 gloss, 26 satin, 20 high gloss, 17 matte and one super matte. A satin or high gloss plan leans toward the 3M side of the table.
| In the site catalog | KPMF | 3M |
|---|---|---|
| Films | 163 | 112 |
| Vinyl wrap | 156 | 112 |
| Paint protection film | 7 | 0 |
| Gloss | 79 | 40 |
| Matte | 72 | 17 |
| Satin | 2 | 26 |
| High Gloss | 1 | 20 |
| Super Matte | none listed | 1 |
| Color groups | 17 | 16 |
KPMF wrap colors in gloss and matt pairs
In the catalog examples, KPMF wrap colors come as a gloss and a matt film of one shade. KPMF White Gloss VWS Airelease liner K88011 has a partner in KPMF White Matt VWS Airelease liner K89011. The codes differ by one digit, which helps when you search the catalog.
Pairs like these suit a two-tone wrap in a single color, with gloss body and matt roof. KPMF Orange Sunset Gloss VWS Airelease liner K88441 shows the idea with its matt partner. Check the pair on samples, since the names of partner films can differ slightly.
Film for a contrasting roof or hood
A matt roof or hood on a gloss car needs only a panel's worth of film. The film calculator on this site gives single-panel amounts of cast film by body type. Its estimates below include spare for one re-cut panel on a 60-inch roll.
A convertible has no fixed roof, so only the hood figure applies there. Your installer will measure the car itself before ordering any film.
| Body type | Roof | Hood |
|---|---|---|
| Sedan | 3.5 m (11 ft) | 3 m (10 ft) |
| SUV | 4.5 m (15 ft) | 2.5 m (8 ft) |
| Hatchback | 4 m (13 ft) | 2.5 m (8 ft) |
| Coupe | 3 m (10 ft) | 3 m (10 ft) |
| Wagon | 5 m (16 ft) | 2.5 m (8 ft) |
| Pickup | 3.5 m (11 ft) | 3 m (10 ft) |
Adding Avery Dennison to the comparison
A KPMF vs 3M vs Avery shortlist adds a third range of 54 films. Avery Dennison lists 28 gloss, 10 matte and 9 satin films in Supreme Wrapping Film. The guide comparing 3M 2080 and Avery Dennison SW900 covers those two in detail.
For a matte wrap, KPMF offers the largest matte count of the three in the catalog. For a satin wrap, 3M leads the three ranges with 26 films.
What an installer checks in a film
An installer judges a film by how it handles, and that shows only on a real panel. Ask whoever will wrap the car to try a sample of each film on a curve. Their view of handling matters as much as the color.
The KPMF names in the catalog mention an Airelease liner, the maker's term for an air-release backing. Air-release channels let trapped air escape as the film is pressed down. Confirm the details for any 3M film on its own data sheet.
- How the film stretches into recesses with gentle heat.
- Whether it can be lifted and placed again during fitting.
- How cleanly the liner releases from the film.
- How the edges hold once the film is wrapped around a panel.
Questions
Is KPMF good quality?
The site does not grade film quality, and it records what each maker lists. Quality shows in a sample on your car and in how the film handles for your installer. The KPMF technical data sheet states the maker's own figures for each film.
How long does a KPMF wrap last?
Wrap life has no fixed figure, since it depends on how the car lives. Parking outdoors in strong sun, harsh climate and rough washing all shorten it. Careful panel prep, skilled fitting and gentle hand washing help the wrap hold its look.
Who makes the highest quality vinyl wrap?
No maker can be named as highest quality for every car, and the site does not rank them. The right film is the one that carries your shade and suits your installer's hands. Compare samples from two or three makers on your own paint.
Is 3M the top vinyl wrap?
The catalog does not rank 3M or any other maker. By range size, 3M lists 112 films, fewer than KPMF with 163. Your color, finish and installer decide whether 3M is the right film for your car.


