Wraps by car

AC 3000ME wrap

The AC 3000ME wrap covers one generation of this mid-engine coupe built from 1979 to 1985. A vinyl wrap for the full body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The car has a 157.0 in (3,988 mm) long two-door body. This page lists the film needed, the jobs that make sense, and the answers owners ask for.

1generations11.5 mof film for a full wrap

AC 3000ME, first generation, factory photo
AC 3000ME, first generation. Factory color shown.

AC 3000ME wrap colors and ideas

  • AC 3000ME black wrap
  • AC 3000ME white wrap
  • AC 3000ME gray wrap
  • AC 3000ME silver wrap
  • AC 3000ME red wrap
  • AC 3000ME blue wrap
  • AC 3000ME green wrap
  • AC 3000ME yellow wrap
  • AC 3000ME orange wrap
  • AC 3000ME purple wrap
  • AC 3000ME pink wrap
  • AC 3000ME teal wrap
  • AC 3000ME brown wrap
  • AC 3000ME gold wrap
  • AC 3000ME chrome wrap
  • AC 3000ME color shift wrap
  • AC 3000ME carbon fiber wrap
  • AC 3000ME camo and patterned wrap

How much vinyl to wrap an AC 3000ME

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1979–1985coupe (2 doors)157.0 in (3,988 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

AC 3000ME wrap cost factors

An AC 3000ME wrap cost depends on the film type, the panel count, and the prep work on a car from 1979 to 1985. The coupe takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film, and chrome or patterned film raises the total to about 49 ft (15 m). Paint condition matters because panels may be original or repainted. The two long doors each add a large one-piece area that affects labor.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

AC 3000ME wraps by generation

Swipe sideways. Tap a card for the full description.

AC 3000ME, first generation, factory photo
Factory color shown

1979–1985 AC 3000ME coupe (first generation)

1979–1985coupe (2 doors)157.0 in (3,988 mm)

The first generation AC 3000ME was built from 1979 to 1985 as a two-door coupe. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The paint can be checked on a small area to see if the film will bond well. This step saves time and film on a body that is now several decades old.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on an AC 3000ME

An AC 3000ME chrome delete covers the window trim and badges with black film. A partial wrap can be the roof, hood, or mirror caps alone. Paint protection film (PPF) is a clear film on the front end to guard against stone chips. These jobs use less material than the full 38 ft (11.5 m) wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an AC 3000ME: body, cut-outs and film

An AC 3000ME vinyl wrap works with one coupe body style and a length of 157.0 in (3,988 mm). The two long side doors are each large enough to need a single piece of film per door. There are no separate fenders or roof pillars to break up the side panels. This body shape keeps the film count predictable for a full wrap.

AC 3000ME wrap ideas start with the two long side doors that each take one large piece of film. The door handles, mirrors, and badges need cut-outs or come off for a clean install. The front and rear bumpers wrap as separate panels with their own curves. A test spot on the paint is wise before the full wrap goes on.

How much vinyl to wrap an AC 3000ME does not change between generations because the catalog lists one generation only. Anyone counting film for a 1979 to 1985 car can use the estimate of about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The body was not lengthened or widened during those years. The same two-door coupe shape ran through the whole production.

Questions about wrapping an AC 3000ME

How much vinyl does it take to wrap an AC 3000ME?

It takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film to wrap an AC 3000ME. This figure covers the full coupe body from 1979 to 1985. If you choose chrome or patterned film, the estimate goes up to about 49 ft (15 m).

Can I wrap only the hood or the roof of an AC 3000ME?

Yes, you can wrap only the hood or the roof of an AC 3000ME. A partial wrap on this car covers the roof, hood, or mirror caps as separate jobs. You can also do a chrome delete on the window trim and badges. These smaller jobs use less film than a full wrap.

Is an AC 3000ME hard to wrap?

The AC 3000ME is not especially hard to wrap, but two long side doors add work because each door is one large piece of film. The car is 157.0 in (3,988 mm) long, which is compact for a coupe. The main extra step is a paint test on a car from 1979 to 1985 before the film goes on.

How many generations of the AC 3000ME does this page cover?

This page covers one generation of the AC 3000ME, the coupe built from 1979 to 1985. The catalog lists a single body style for those years. All wrap figures on this page apply to that generation.