Wraps by car

AC Cobra wrap

The AC Cobra wrap page covers all six generations of this two-door convertible sports car, from 1965 to the present. A full wrap of the newest 2023–now body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 56 ft (17 m). The seventh-generation car measures 166.3 in (4,225 mm) in length.

6generations14 mof film for a full wrap

AC Cobra, seventh generation, factory photo
AC Cobra, seventh generation. Factory color shown.

AC Cobra wrap colors and ideas

  • Cobra black wrap
  • Cobra white wrap
  • Cobra gray wrap
  • Cobra silver wrap
  • Cobra red wrap
  • Cobra blue wrap
  • Cobra green wrap
  • Cobra yellow wrap
  • Cobra orange wrap
  • Cobra purple wrap
  • Cobra pink wrap
  • Cobra teal wrap
  • Cobra brown wrap
  • Cobra gold wrap
  • Cobra chrome wrap
  • Cobra color shift wrap
  • Cobra carbon fiber wrap
  • Cobra camo and patterned wrap

How much vinyl to wrap an AC Cobra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowconvertible (2 doors)166.3 in (4,225 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2013–2015convertible (2 doors)158.3 in (4,020 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m)
1999–2007convertible (2 doors)165.4 in (4,200 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)
1990–2001convertible (2 doors)162.0 in (4,115 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)
1965–1967convertible (2 doors)156.0 in (3,962 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)
1962–1964convertible (2 doors)151.5 in (3,848 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Cobra wrap cost factors

Cobra wrap cost depends on the generation of the car, the film type, and the amount of trim work. A larger seventh-generation body uses about 46 ft (14 m) of 60-inch (1.52 m) cast film, while a third-generation body uses about 38 ft (11.5 m), so more film raises the cost. Chrome or patterned film adds waste and takes about 56 ft (17 m) on the newest body. Removing and reinstalling parts like mirrors and badges for cut-outs also adds labor.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Cobra wraps by generation

Swipe sideways. Tap a card for the full description.

AC Cobra, seventh generation, factory photo
Factory color shown

2023–now Cobra convertible (seventh generation)

2023–nowconvertible (2 doors)166.3 in (4,225 mm)

The AC Cobra seventh generation, built from 2023 onward, is a convertible with a fabric top that is not wrapped. The film ends where the fabric top begins, so the installer trims a clean line along the top of the doors and the rear deck. A folding hard top, if fitted, is wrapped as its own separate panels. On this body, no film goes on the soft top itself.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

AC Cobra, sixth generation, factory photo
Factory color shown

2013–2015 Cobra convertible (sixth generation)

2013–2015convertible (2 doors)158.3 in (4,020 mm)

The sixth-generation AC Cobra, produced from 2013 to 2015, is a two-door convertible measuring 158.3 in (4,020 mm). Its compact size and open top mean a full wrap takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The body is covered in several large panels: hood, front fenders, doors, and rear quarters. The fabric top is not wrapped, so the film ends at the top of the doors.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).

AC Cobra, fifth generation, factory photo
Factory color shown

1999–2007 Cobra convertible (fifth generation)

1999–2007convertible (2 doors)165.4 in (4,200 mm)

The fifth-generation AC Cobra, built from 1999 to 2007, is a 165.4 in (4,200 mm) convertible sports car. Cars of these years may have original paint or repainted panels, so the installer performs a test spot before a full wrap to check adhesion. A full wrap takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. The open top means no roof film is needed.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

AC Cobra, fourth generation, factory photo
Factory color shown

1990–2001 Cobra convertible (fourth generation)

1990–2001convertible (2 doors)162.0 in (4,115 mm)

The fourth-generation AC Cobra, made from 1990 to 2001, overlaps with the fifth generation from 1999 to 2001. The owner of a car from those years must check which body style they have, because the two generations differ in length and film needs. The fourth-generation body measures 162.0 in (4,115 mm) and takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. It is a two-door convertible, so the fabric top is not wrapped.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

AC Cobra, third generation, factory photo
Factory color shown

1965–1967 Cobra convertible (third generation)

1965–1967convertible (2 doors)156.0 in (3,962 mm)

The third-generation AC Cobra, produced from 1965 to 1967, is a short two-door convertible measuring 156.0 in (3,962 mm). Its size and open body mean a full wrap uses about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The body is wrapped in large panels: hood, front fenders, doors, and rear deck. The fabric top is not wrapped, so the film stops at the top of the doors and rear deck.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

AC Cobra, second generation, factory photo
Factory color shown

1962–1964 Cobra convertible (second generation)

1962–1964convertible (2 doors)151.5 in (3,848 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Cobra

A partial wrap on a Cobra can cover the hood, mirror caps, and rear deck for a targeted color accent. Cobra chrome delete covers the bright window trim and badges with black film for a darker look. Paint protection film in a clear finish on the front end guards against stone chips without changing the color. These smaller jobs are options for owners who do not want a full color change wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an AC Cobra: body, cut-outs and film

An AC Cobra vinyl wrap means working on a compact convertible sports car whose two-door body stays below 166.3 in (4,225 mm) in every generation. The convertible shape removes roof film from the count, so a full wrap uses less vinyl than a closed coupe of the same length. The largest body still needs only about 46 ft (14 m) of 60-inch (1.52 m) cast film. Shorter bodies from earlier years take about 38 to 39 ft (11.5 to 12 m) of the same film.

Cobra wrap ideas should account for the fabric top, which is not wrapped, and trim parts that require cut-outs or removal. The convertible body means the film ends where the fabric top begins, leaving a clean edge along the top of the doors and rear deck. Bright window trim and badges can be covered with black film in a chrome delete job, but they must be removed or masked precisely. Any side mirrors or door handles also need cut-outs or temporary removal for a neat finish.

How much vinyl to wrap a Cobra depends on the generation, because length changes from 156.0 in (3,962 mm) on the third generation to 166.3 in (4,225 mm) on the seventh. The newest body needs about 46 ft (14 m) of 60-inch (1.52 m) cast film, while the 1965–1967 body takes about 38 ft (11.5 m). A fifth-generation car from 1999–2007 falls between them at about 39 ft (12 m). Always check the year of the specific body, since the fourth and fifth generations overlap in production.

Questions about wrapping an AC Cobra

How much vinyl does it take to wrap an AC Cobra?

How much vinyl does it take to wrap an AC Cobra? A full wrap of the newest seventh-generation Cobra takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 56 ft (17 m) due to extra waste. Earlier generations take less, down to about 38 ft (11.5 m) for the third-generation body.

Is the top of a Cobra wrapped?

Is the top of a Cobra wrapped? No, the fabric top is not wrapped. The vinyl ends where the fabric begins, so the installer trims a clean line along the top of the doors and rear deck. A folding hard top, if present, is wrapped as its own panels.

Can I wrap only the hood or the roof of a Cobra?

Can I wrap only the hood or the roof of a Cobra? Yes, a partial wrap can cover the hood, mirror caps, and rear deck. The roof is not wrapped because the Cobra has a fabric top. Chrome delete on window trim and badges is another smaller job. Paint protection film on the front end is also available.

Is a Cobra hard to wrap?

Is a Cobra hard to wrap? Yes, the convertible body adds work because the film must end cleanly where the fabric top begins. The small size of the car, from 156.0 in (3,962 mm) to 166.3 in (4,225 mm), means tight curves on the fenders and rear deck. Cut-outs for mirrors, handles, and badges require careful trimming. These factors make the Cobra more labor-intensive than a flat-sided coupe.