Wraps by car

AC Frua wrap

The AC Frua wrap covers the 1965–1973 sports car, offered as a convertible and a coupe. A full vinyl wrap of the newest body takes about 41 ft (12.5 m) for the convertible and up to 49 ft (15 m) for the coupe with 60-inch (1.52 m) cast film.

1generations12.5 mof film for a full wrap

AC Frua, first generation, factory photo
AC Frua, first generation. Factory color shown.

AC Frua wrap colors and ideas

  • Frua black wrap
  • Frua white wrap
  • Frua gray wrap
  • Frua silver wrap
  • Frua red wrap
  • Frua blue wrap
  • Frua green wrap
  • Frua yellow wrap
  • Frua orange wrap
  • Frua purple wrap
  • Frua pink wrap
  • Frua teal wrap
  • Frua brown wrap
  • Frua gold wrap
  • Frua chrome wrap
  • Frua color shift wrap
  • Frua carbon fiber wrap
  • Frua camo and patterned wrap

How much vinyl to wrap an AC Frua

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1965–1973convertible, coupe (2 doors)176.0 in (4,470 mm)about 41 ft (12.5 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m)

Frua wrap cost factors

Frua wrap cost rests on the size of the car and the body style, as the convertible uses about 41 ft (12.5 m) and the coupe up to 49 ft (15 m) of cast film. A chrome or patterned film raises the amount to about 54 ft (16.5 m). The open-top design changes the work, since the fabric top is not wrapped but a folding hard top adds panels.

  • Film for a full wrap: about 41 ft (12.5 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Frua wraps by generation

Swipe sideways. Tap a card for the full description.

AC Frua, first generation, factory photo
Factory color shown

1965–1973 Frua convertible, coupe (first generation)

1965–1973convertible, coupe (2 doors)176.0 in (4,470 mm)

On the first-generation AC Frua, the open top stays as it is in a wrap. A fabric top is not wrapped and the film ends where it begins, so the edges are finished cleanly at the base of the top. A folding hard top is wrapped as panels of its own, matching the body lines.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Frua

A partial wrap suits the Frua's long hood and roof, and mirror caps can be covered in a small amount of film. Chrome delete (bright trim covered with black film) works well on the window trim and badges. Paint protection film (PPF), a clear film on the front end, guards the nose from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an AC Frua: body, cut-outs and film

The AC Frua vinyl wrap follows the car's long body, 176.0 in (4,470 mm) in both styles. The two long side doors are each one large piece of film, so the installer works with wide panels. A fabric top is not wrapped and film ends where it begins, while a folding hard top is wrapped as panels of its own.

Frua wrap ideas begin with the doors, where each long side panel is wrapped as one piece. The convertible's fabric top is left unwrapped and the film edges are cut clean along its base. A folding hard top, when fitted, is covered in separate panels to follow its folds.

How much vinyl to wrap a Frua depends on the body style you have. The coupe takes more film than the convertible, from about 49 ft (15 m) to 41 ft (12.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for up to about 54 ft (16.5 m).

Questions about wrapping an AC Frua

How much vinyl does it take to wrap an AC Frua?

An AC Frua takes about 41 ft (12.5 m) to 49 ft (15 m) of 60-inch (1.52 m) cast film depending on the body style. The convertible needs the lower amount and the coupe the higher, with up to about 54 ft (16.5 m) for chrome or patterned film.

Is the top of a Frua wrapped?

No, the fabric top of an AC Frua convertible is not wrapped. The film ends where the top begins, so the install finishes at the base of the fabric. A folding hard top, if fitted, is wrapped as panels of its own.

Which Frua body takes more film?

The AC Frua coupe takes more film than the convertible. The coupe needs up to 49 ft (15 m) against the convertible's about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of a Frua?

Yes, a partial wrap on an AC Frua can cover only the hood or the roof, and mirror caps are also an option. A chrome delete on the window trim and badges is a smaller job. Clear paint protection film (PPF) on the front end is another way to wrap part of the car.