Wraps by car

AC Greyhound wrap

The AC Greyhound wrap page covers the AC Greyhound sports car from 1959–1963, the only generation in the catalog. A full wrap of this two-door coupe takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 59 ft (18 m). This vinyl wrap guide explains what fits the body, what changes between generations, and what smaller jobs cost.

1generations14.5 mof film for a full wrap

AC Greyhound, first generation, factory photo
AC Greyhound, first generation. Factory color shown.

AC Greyhound wrap colors and ideas

  • Greyhound black wrap
  • Greyhound white wrap
  • Greyhound gray wrap
  • Greyhound silver wrap
  • Greyhound red wrap
  • Greyhound blue wrap
  • Greyhound green wrap
  • Greyhound yellow wrap
  • Greyhound orange wrap
  • Greyhound purple wrap
  • Greyhound pink wrap
  • Greyhound teal wrap
  • Greyhound brown wrap
  • Greyhound gold wrap
  • Greyhound chrome wrap
  • Greyhound color shift wrap
  • Greyhound carbon fiber wrap
  • Greyhound camo and patterned wrap

How much vinyl to wrap an AC Greyhound

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1959–1963coupe (2 doors)175.0 in (4,445 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Greyhound wrap cost factors

The Greyhound wrap cost depends mainly on the film type and the condition of the panels. The car is small, so a full color change uses about 48 ft (14.5 m) of film, which keeps material use low. Chrome delete or patterned film uses more film, about 59 ft (18 m), and adds labor. The installer will check the paint and the long doors first, because those add the most time.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Greyhound wraps by generation

Swipe sideways. Tap a card for the full description.

AC Greyhound, first generation, factory photo
Factory color shown

1959–1963 Greyhound coupe (first generation)

1959–1963coupe (2 doors)175.0 in (4,445 mm)

Paint age matters on a 1959–1963 AC Greyhound, because panels may be original or repainted. The installer uses a test spot on the paint before a full wrap to check how the film sticks. On older paint the surface can be thin, so the test spot shows if the film will lift the paint later. If the paint is weak, a wrap job needs more care on the edges and the doors.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Greyhound

The AC Greyhound works well for partial wrap jobs on the roof, hood, and the two mirror caps. A chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) can be put on the front end as clear film. These smaller jobs use much less film than a full wrap and keep the narrow coupe shape easy to cover.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an AC Greyhound: body, cut-outs and film

The AC Greyhound vinyl wrap starts with a compact two-door coupe body that is 175.0 in (4,445 mm) long. This size keeps the main panels simple, but the two long side doors are each one large piece of film. A single installer can handle the roof and hood without extra hands. The shape has no sharp body lines, so the film lays down with less heat.

Greyhound wrap ideas begin with the doors, because each door is one large piece of film that needs careful alignment. The door handles, mirror caps, and trim around the windows are the main parts that come off or need cut-outs. The long side glass sits close to the beltline, so the film must be trimmed precisely there. The front and rear bumpers are separate parts that stay in place during a wrap.

How much vinyl to wrap a Greyhound stays the same across the catalog because this page covers only the first generation from 1959–1963. The body did not change its outer dimensions in those years, so the film estimate does not change. The film estimate is 48 ft (14.5 m) of 60-inch (1.52 m) cast film, or 59 ft (18 m) with chrome or patterned film. A car from the last year needs the same amount as one from the first.

Questions about wrapping an AC Greyhound

How much vinyl does it take to wrap an AC Greyhound?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap an AC Greyhound with a single color. For chrome or patterned film, the estimate is about 59 ft (18 m), because the film has to be matched at the seams. These figures are for the first generation body from 1959–1963. The car is a small coupe, so it uses less film than larger cars.

Can I wrap only the hood or the roof of a Greyhound?

Yes, you can wrap only the hood or the roof of a Greyhound as a partial wrap. A partial color change can also cover just the mirror caps. You can do a chrome delete on the window trim and badges, or add paint protection film (PPF) to the front end. A partial job uses less film and is done faster than a full wrap.

Is a Greyhound hard to wrap?

A Greyhound can be hard to wrap because each of the two long side doors is one large piece of film. This means the installer has to handle a big sheet without creases on a 175.0 in (4,445 mm) long body. The paint age also matters on a car from 1959–1963, so a test spot is done first. With the right tools, the coupe shape is still manageable.

How many generations of the Greyhound does this page cover?

This page covers one generation of the Greyhound, the first generation from 1959–1963. The catalog has no other generation listed for this model. The body did not change in those years, so the wrap data are the same. The film estimate is about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.