Wraps by car

Alpine A110 wrap

The Alpine A110 wrap page covers both generations of this French sports car. The newest A110 measures 164.6 in (4,180 mm) long and is a two-door coupe. A full vinyl wrap of the second generation needs about 46 ft (14 m) of 60-inch (1.52 m) cast film. The first generation from 1961–1977 is smaller at 159.0 in (4,039 mm) and uses about 36 ft (11 m).

2generations14 mof film for a full wrap

Alpine A110, second generation, factory photo
Alpine A110, second generation. Factory color shown.

Alpine A110 wrap colors and ideas

  • Alpine A110 black wrap
  • Alpine A110 white wrap
  • Alpine A110 gray wrap
  • Alpine A110 silver wrap
  • Alpine A110 red wrap
  • Alpine A110 blue wrap
  • Alpine A110 green wrap
  • Alpine A110 yellow wrap
  • Alpine A110 orange wrap
  • Alpine A110 purple wrap
  • Alpine A110 pink wrap
  • Alpine A110 teal wrap
  • Alpine A110 brown wrap
  • Alpine A110 gold wrap
  • Alpine A110 chrome wrap
  • Alpine A110 color shift wrap
  • Alpine A110 carbon fiber wrap
  • Alpine A110 camo and patterned wrap

How much vinyl to wrap an Alpine A110

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowcoupe (2 doors)164.6 in (4,180 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)
1961–1977coupe (2 doors)159.0 in (4,039 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Alpine A110 wrap cost factors

Alpine A110 wrap cost depends on the amount of film, the number of cut-outs, and the finish chosen. The second generation takes about 46 ft (14 m) of cast film while the first takes about 36 ft (11 m). Chrome or patterned film adds about 5 ft (1.5 m) on either body. Removing bumpers, sensors, or cameras for a cleaner edge adds labor time.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Some trims have a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

Alpine A110 wraps by generation

Swipe sideways. Tap a card for the full description.

Alpine A110, second generation, factory photo
Factory color shown

2017–now Alpine A110 coupe (second generation)

2017–nowcoupe (2 doors)164.6 in (4,180 mm)

The second generation Alpine A110 is a two-door coupe produced from 2017 onward and measures 164.6 in (4,180 mm). It takes about 46 ft (14 m) of 60-inch cast film for a full wrap. The two long side doors each become one large piece of film. Parking sensors and cameras add cut-outs, and some trims have a separate rear spoiler piece.

Two long side doors: each door is one large piece of film.

Some trims have a rear spoiler: it is wrapped as a piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Alpine A110, first generation, factory photo
Factory color shown

1961–1977 Alpine A110 coupe (first generation)

1961–1977coupe (2 doors)159.0 in (4,039 mm)

The first generation Alpine A110 was built from 1961 to 1977 as a two-door coupe with a length of 159.0 in (4,039 mm). A full wrap needs about 36 ft (11 m) of 60-inch cast film. On a car of these years panels may be original or repainted, so a test spot on the paint comes before a full wrap. The two long side doors are each wrapped as one piece.

Two long side doors: each door is one large piece of film.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on an Alpine A110

An Alpine A110 partial wrap can cover the roof, hood, mirror caps, or rear spoiler. A chrome delete covers the window trim and badges with black film to change the brightwork. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpine A110: body, cut-outs and film

An Alpine A110 vinyl wrap fits a compact two-door coupe body with a length of 164.6 in (4,180 mm). The two long side doors each become one large piece of film on the newest generation. A full wrap requires careful panel planning because the curved rear haunches demand stretch and relief cuts. The size means fewer pieces than on a four-door car but each piece is larger.

Alpine A110 wrap ideas must account for parking sensors in every bumper and cameras in the body. The film is cut around each sensor and each lens so the systems still work. Some trims have a rear spoiler, which is wrapped as its own separate piece. On the newest generation the two long side doors are each wrapped with one large piece of film.

How much vinyl to wrap an Alpine A110 depends on the generation and the plan for chrome or patterned film. The second generation from 2017 onward needs about 46 ft (14 m) of 60-inch cast film for a standard color change wrap. The first generation from 1961 to 1977 needs about 36 ft (11 m) of the same width. Chrome or patterned film requires more material on either body: about 51 ft (15.5 m) for the newest car and about 48 ft (14.5 m) for the first.

Questions about wrapping an Alpine A110

How much vinyl does it take to wrap an Alpine A110?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap the newest Alpine A110. This figure is for a standard color change wrap on the second generation from 2017 onward. Chrome or patterned film would need about 51 ft (15.5 m). The first generation needs about 36 ft (11 m).

Can I wrap only the hood or the roof of an Alpine A110?

Yes, you can wrap only the hood or the roof of an Alpine A110. Partial wrap jobs are done on the roof, hood, mirror caps, or rear spoiler. The film is cut to the exact shape of each panel. This leaves the rest of the body in the original paint.

Is an Alpine A110 hard to wrap?

Yes, an Alpine A110 takes extra work because of sensors and cameras in the bumpers and body. Each sensor and lens needs a precise cut-out in the film so the systems keep working. The two long side doors are large single pieces that need careful stretching. Some trims have a rear spoiler that is wrapped separately.

How many generations of the Alpine A110 does this page cover?

This page covers two generations of the Alpine A110. The first generation was built from 1961 to 1977 and the second from 2017 onward. Both are two-door coupes with different lengths and film needs. The newest generation is larger and takes more film.