Wraps by car

Alpine A310 wrap

The Alpine A310 wrap page covers the first generation of this French sports car, produced from 1971 to 1985. A full wrap of the coupe body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 51 ft (15.5 m). This guide gives you the measurements and details for a clean vinyl wrap.

1generations12 mof film for a full wrap

Alpine A310, first generation, factory photo
Alpine A310, first generation. Factory color shown.

Alpine A310 wrap colors and ideas

  • Alpine A310 black wrap
  • Alpine A310 white wrap
  • Alpine A310 gray wrap
  • Alpine A310 silver wrap
  • Alpine A310 red wrap
  • Alpine A310 blue wrap
  • Alpine A310 green wrap
  • Alpine A310 yellow wrap
  • Alpine A310 orange wrap
  • Alpine A310 purple wrap
  • Alpine A310 pink wrap
  • Alpine A310 teal wrap
  • Alpine A310 brown wrap
  • Alpine A310 gold wrap
  • Alpine A310 chrome wrap
  • Alpine A310 color shift wrap
  • Alpine A310 carbon fiber wrap
  • Alpine A310 camo and patterned wrap

How much vinyl to wrap an Alpine A310

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1971–1985coupe (2 doors)167.3 in (4,250 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Alpine A310 wrap cost factors

The Alpine A310 wrap cost depends on the film type, the number of panels you cover, and the condition of the original paint. Since the car is a single body style produced from 1971 to 1985, the surface area is consistent, but any repainted panels may need extra prep work. A full wrap uses about 39 ft (12 m) of 60-inch cast film, and chrome or patterned film brings the total to about 51 ft (15.5 m). The final cost is also affected by how much of the trim you remove or leave on the car.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Alpine A310 wraps by generation

Swipe sideways. Tap a card for the full description.

Alpine A310, first generation, factory photo
Factory color shown

1971–1985 Alpine A310 coupe (first generation)

1971–1985coupe (2 doors)167.3 in (4,250 mm)

The first generation Alpine A310 from 1971 to 1985 is a two-door coupe with a length of 167.3 in (4,250 mm). On a car of these years, the paint may be original or a repaint, so a test spot is essential before a full wrap. The long side doors are each one large piece of film, which makes installation cleaner but requires patience. Because the body has no separate bumpers, the film has to be tucked and trimmed at the body seams.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on an Alpine A310

A partial wrap on an Alpine A310 can cover the roof, hood, or mirror caps without committing to the whole car. For a chrome delete, the window trim and badges are the main brightwork, and black film gives them a subtle look. Paint protection film (PPF) is another option: a clear film on the front end guards against stone chips. These smaller jobs use less material than a full wrap and are a good way to change one area of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpine A310: body, cut-outs and film

An Alpine A310 vinyl wrap has to follow the coupe's smooth, rounded shape and compact dimensions. The car is 167.3 in (4,250 mm) long, which keeps material use moderate for a classic sports car. The two long side doors are the largest panels, but they are single pieces that stretch cleanly over the body lines. With no roof pillars to break the flow, a full wrap needs careful squeegee work on the rear haunches.

Alpine A310 wrap ideas often start with the long doors, because each one takes a single large piece of film. The door handles and mirrors are small, so they are wrapped separately or removed for a neater edge. You can create contrast by using a different film on the roof panel or hood, since those areas are flat and simple. The front and rear bumpers are integrated into the body, so they are wrapped in one pass with the surrounding panels.

When you want to know how much vinyl to wrap an Alpine A310, the only body in the catalog is the first-generation coupe from 1971 to 1985. There are no later generations with different dimensions, so the film estimate stays the same for every year. A full wrap of this single body style uses about 39 ft (12 m) of 60-inch cast film. If you choose chrome or patterned film, the estimate rises to about 51 ft (15.5 m) because of pattern matching and extra waste.

Questions about wrapping an Alpine A310

How much vinyl does it take to wrap an Alpine A310?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap an Alpine A310. If you use chrome or patterned film, plan for about 51 ft (15.5 m). These figures are for the first-generation coupe, the only body in the catalog.

Can I wrap only the hood or the roof of an Alpine A310?

Yes, you can wrap only the hood or the roof of an Alpine A310. A partial wrap can also cover the mirror caps. For smaller details like window trim and badges, a chrome delete uses black film to change the look without a full wrap.

Is an Alpine A310 hard to wrap?

The Alpine A310 is not overly hard to wrap, but the two long side doors are each one large piece of film that needs careful handling. The car is 167.3 in (4,250 mm) long, so the panels are long but not extremely wide. The main challenge is working around the curved rear section and keeping the film free of wrinkles on the doors.

How many generations of the Alpine A310 does this page cover?

This page covers one generation of the Alpine A310. The car was produced from 1971 to 1985 as a two-door coupe, and the catalog lists only that first generation.