Wraps by car

Alpine A610 wrap

The Alpine A610 wrap page covers the single generation of this rear-engined sports coupe, produced from 1991 to 1995. A full color change wrap on an A610 takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl wrap, or about 54 ft (16.5 m) for chrome or patterned film. The car's compact 173.6 in (4,410 mm) length keeps material use modest for a two-door sports car.

1generations14.5 mof film for a full wrap

Alpine A610, first generation, factory photo
Alpine A610, first generation. Factory color shown.

Alpine A610 wrap colors and ideas

  • Alpine A610 black wrap
  • Alpine A610 white wrap
  • Alpine A610 gray wrap
  • Alpine A610 silver wrap
  • Alpine A610 red wrap
  • Alpine A610 blue wrap
  • Alpine A610 green wrap
  • Alpine A610 yellow wrap
  • Alpine A610 orange wrap
  • Alpine A610 purple wrap
  • Alpine A610 pink wrap
  • Alpine A610 teal wrap
  • Alpine A610 brown wrap
  • Alpine A610 gold wrap
  • Alpine A610 chrome wrap
  • Alpine A610 color shift wrap
  • Alpine A610 carbon fiber wrap
  • Alpine A610 camo and patterned wrap

How much vinyl to wrap an Alpine A610

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1995coupe (2 doors)173.6 in (4,410 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Alpine A610 wrap cost factors

Alpine A610 wrap cost depends on the size of the car, the condition of the paint, and the film chosen, not on a flat rate for this model. The A610 uses about 48 ft (14.5 m) of film, and a car of this age often has original or repainted panels that need correction before wrapping. Matte, satin, chrome, and textured films cost more than gloss cast film, and door jambs or the rear wing add labor.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Alpine A610 wraps by generation

Swipe sideways. Tap a card for the full description.

Alpine A610, first generation, factory photo
Factory color shown

1991–1995 Alpine A610 coupe (first generation)

1991–1995coupe (2 doors)173.6 in (4,410 mm)

The first generation Alpine A610, built from 1991 to 1995, often has paint age issues on its composite panels, so a test spot comes before a full wrap. Some panels may be original gel coat, while others have been repainted, and film adhesion can vary between them. A test spot on each panel type shows whether primer or more surface prep is needed before the wrap.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on an Alpine A610

On an Alpine A610, partial wrap jobs include the roof, hood, and mirror caps, and a chrome delete covers the window trim and badges. Paint protection film (PPF), a clear film on the front end, is a common way to guard the nose and mirrors. These smaller jobs use less film and are a good first step for owners who want to change the car's look without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpine A610: body, cut-outs and film

The Alpine A610 vinyl wrap work is shaped by its one body style: a two-door coupe with a steel backbone chassis and composite body panels. The car measures 173.6 in (4,410 mm) long, and the wrap installer works around composite panels that flex slightly under film tension. The coupe shape has a long roof, a rear hatch, and a pronounced rear wing, so the wrap is cut into manageable sections.

Alpine A610 wrap ideas start with the two long side doors, where each door is one large piece of film that runs from the front fender line to the rear haunch. The door handles, side mirrors, and window trim are removed or cut out for a clean edge, and the pop-up headlights must be wrapped with the lights closed and then cycled to check film travel. The front air dam and rear diffuser are wrapped off the car where possible.

How much vinyl to wrap an Alpine A610 depends on the year of the car, but the 1991–1995 generation uses about 48 ft (14.5 m) of film for a full wrap. Installers add ten percent for mistakes, complex curves, and hidden areas, so a safe order is 53 ft (16 m) of 60-inch film. Cars with faded paint may need more surface prep and primer, which can use extra material if panels are rough.

Questions about wrapping an Alpine A610

How much vinyl does it take to wrap an Alpine A610?

A full wrap on an Alpine A610 takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 54 ft (16.5 m) because the pattern must be matched at seams and the film is less forgiving. Installers add a little extra for mistakes and complex areas like the rear wing.

Can I wrap only the hood or the roof of an Alpine A610?

Yes, you can wrap only the hood or the roof of an Alpine A610, and these are common partial wrap jobs. The roof is a single panel between the A-pillars and the rear hatch, and the hood is a separate composite piece that lifts forward, so each can be wrapped without touching the doors. Mirror caps are also easy to do as a small accent.

Is an Alpine A610 hard to wrap?

The Alpine A610 is not the hardest car to wrap, but its composite body and long doors add work. Each of the two side doors is one large piece of film, so an installer needs a helper or a steady hand to avoid wrinkles. The pop-up headlights and rear wing also require careful cutting and relief cuts.

How many generations of the Alpine A610 does this page cover?

This page covers one generation of the Alpine A610, produced from 1991 to 1995. There is only one generation of this model, a two-door coupe with a rear-mounted engine.