Wraps by car

Autobianchi A 112 wrap

This page covers the Autobianchi A 112 wrap in one generation produced from 1969 to 1986. A full vinyl wrap of the newest hatchback body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The car is a three-door mini with a tailgate that includes the rear glass.

1generations11.5 mof film for a full wrap

Autobianchi A 112, first generation, factory photo
Autobianchi A 112, first generation. Factory color shown.

Autobianchi A 112 wrap colors and ideas

  • Autobianchi A 112 black wrap
  • Autobianchi A 112 white wrap
  • Autobianchi A 112 gray wrap
  • Autobianchi A 112 silver wrap
  • Autobianchi A 112 red wrap
  • Autobianchi A 112 blue wrap
  • Autobianchi A 112 green wrap
  • Autobianchi A 112 yellow wrap
  • Autobianchi A 112 orange wrap
  • Autobianchi A 112 purple wrap
  • Autobianchi A 112 pink wrap
  • Autobianchi A 112 teal wrap
  • Autobianchi A 112 brown wrap
  • Autobianchi A 112 gold wrap
  • Autobianchi A 112 chrome wrap
  • Autobianchi A 112 color shift wrap
  • Autobianchi A 112 carbon fiber wrap
  • Autobianchi A 112 camo and patterned wrap

How much vinyl to wrap an Autobianchi A 112

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1969–1986hatchback (3 doors)127.2 in (3,230 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Autobianchi A 112 wrap cost factors

The Autobianchi A 112 wrap cost depends on panel sizes, film choice, and paint condition. A full wrap of this 127.2 in (3,230 mm) hatchback uses about 38 ft (11.5 m) of standard cast film, while chrome or patterned film raises the material amount to about 48 ft (14.5 m). Paint age can require extra preparation if panels are original or repainted.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Autobianchi A 112 wraps by generation

Swipe sideways. Tap a card for the full description.

Autobianchi A 112, first generation, factory photo
Factory color shown

1969–1986 Autobianchi A 112 hatchback (first generation)

1969–1986hatchback (3 doors)127.2 in (3,230 mm)

The first generation Autobianchi A 112 was built from 1969 to 1986 as a three-door hatchback. Paint age matters on a car of these years because panels may be original or repainted, and a test spot comes before a full wrap. This single body style keeps wrap planning straightforward.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on an Autobianchi A 112

Partial wrap options for the Autobianchi A 112 include the roof, hood, and mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end is also available.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Autobianchi A 112: body, cut-outs and film

The Autobianchi A 112 vinyl wrap suits its compact hatchback shape with two long side doors and a rear tailgate. Each side door is large enough to be wrapped as one piece of film, which reduces visible seams. The total length of 127.2 in (3,230 mm) keeps material needs low for a full color change wrap.

Autobianchi A 112 wrap ideas start with the tailgate, where the film ends at the edge of the rear glass. The two side doors can be covered in single large pieces, so a contrasting roof or side stripe is easy to plan. Window trim and badges can also be covered with black film for a chrome delete.

Knowing how much vinyl to wrap an Autobianchi A 112 means counting the simple panels of this one body style. The first generation from 1969–1986 has no other factory shapes, so film quantities stay consistent. A full wrap without chrome or patterned film uses about 38 ft (11.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping an Autobianchi A 112

How much vinyl does it take to wrap an Autobianchi A 112?

It takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film to wrap an Autobianchi A 112. This figure covers a full vinyl wrap of the newest hatchback body. With chrome or patterned film, you need about 48 ft (14.5 m).

Can I wrap only the hood or the roof of an Autobianchi A 112?

Yes, you can wrap only the hood or the roof of an Autobianchi A 112. The partial wrap options include the roof, hood, and mirror caps. The shape of this mini hatchback makes these smaller panels easy to cover.

Is an Autobianchi A 112 hard to wrap?

An Autobianchi A 112 is not especially hard to wrap, but a few details add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The two long side doors are each one large piece, which requires careful handling.

How many generations of the Autobianchi A 112 does this page cover?

This page covers one generation of the Autobianchi A 112, produced from 1969 to 1986. It is the only body style listed in the catalog as a three-door hatchback.