Wraps by car

Autobianchi Bianchina wrap

The Autobianchi Bianchina wrap page covers the single generation produced from 1957 to 1970. A full vinyl wrap of the newest convertible body takes about 28 ft (8.5 m) of 60-inch (1.52 m) cast film. The wagon needs the most film at up to 38 ft (11.5 m), and chrome or patterned film can total about 51 ft (15.5 m).

1generations8.5 mof film for a full wrap

Autobianchi Bianchina, first generation, factory photo
Autobianchi Bianchina, first generation. Factory color shown.

Autobianchi Bianchina wrap colors and ideas

  • Bianchina black wrap
  • Bianchina white wrap
  • Bianchina gray wrap
  • Bianchina silver wrap
  • Bianchina red wrap
  • Bianchina blue wrap
  • Bianchina green wrap
  • Bianchina yellow wrap
  • Bianchina orange wrap
  • Bianchina purple wrap
  • Bianchina pink wrap
  • Bianchina teal wrap
  • Bianchina brown wrap
  • Bianchina gold wrap
  • Bianchina chrome wrap
  • Bianchina color shift wrap
  • Bianchina carbon fiber wrap
  • Bianchina camo and patterned wrap

How much vinyl to wrap an Autobianchi Bianchina

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1957–1970convertible, sedan, wagon (2 or 3 doors)118.9 in (3,020 mm) to 127.0 in (3,226 mm)about 28 ft (8.5 m) for the convertible to 38 ft (11.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m)

Bianchina wrap cost factors

Bianchina wrap cost depends on the amount of film, body style, and how many parts need cut-outs or removal. The convertible uses about 28 ft (8.5 m) and the wagon about 38 ft (11.5 m), which changes material quantity. The wagon also has more edges around the tailgate glass and longer roof sections. A chrome or patterned wrap uses more film and more labor for alignment.

  • Film for a full wrap: about 28 ft (8.5 m) for the convertible to 38 ft (11.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).
  • Body: convertible, sedan, wagon (2 or 3 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Bianchina wraps by generation

Swipe sideways. Tap a card for the full description.

Autobianchi Bianchina, first generation, factory photo
Factory color shown

1957–1970 Bianchina convertible, sedan, wagon (first generation)

1957–1970convertible, sedan, wagon (2 or 3 doors)118.9 in (3,020 mm) to 127.0 in (3,226 mm)

The open top on the 1957–1970 Autobianchi Bianchina is not wrapped when it is a fabric convertible roof. The film ends cleanly where the fabric begins, so no vinyl is applied over the soft top. A folding hard top, if fitted, is treated as separate panels and wrapped like other body panels.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 28 ft (8.5 m) for the convertible to 38 ft (11.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Bianchina

The Bianchina can receive a partial wrap on the roof, hood, or mirror caps. A Bianchina chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These options use less film than a full wrap and suit the small body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Autobianchi Bianchina: body, cut-outs and film

An Autobianchi Bianchina vinyl wrap varies with three body styles: convertible, sedan, and wagon with two or three doors. The smallest convertible is 118.9 in (3,020 mm) long, while the largest wagon reaches 127.0 in (3,226 mm). This small size means film use stays modest, and the wagon adds area on the roof and tailgate.

Bianchina wrap ideas must account for the convertible top and the wagon tailgate glass. A fabric soft top is left uncovered, so the film ends where the top begins and no extra film is cut for it. A folding hard top, when present, is wrapped as its own separate panels. On the wagon, the film stops at the edge of the rear glass set into the tailgate.

How much vinyl to wrap a Bianchina depends on the body style within this single generation. The convertible uses about 28 ft (8.5 m) of 60-inch (1.52 m) film, and the wagon takes about 38 ft (11.5 m). A chrome or patterned layout can need up to about 51 ft (15.5 m) because of extra trimming and alignment. These figures are for a full exterior wrap with no roof on the convertible.

Questions about wrapping an Autobianchi Bianchina

How much vinyl does it take to wrap an Autobianchi Bianchina?

It takes about 28 ft (8.5 m) to wrap the convertible Autobianchi Bianchina, the newest body in the catalog. That estimate uses 60-inch (1.52 m) cast film for a full wrap. The wagon needs up to about 38 ft (11.5 m), and chrome or patterned film can require up to about 51 ft (15.5 m).

Is the top of a Bianchina wrapped?

No, the fabric top of an Autobianchi Bianchina is not wrapped. The vinyl wrap ends where the soft top begins. A folding hard top, when present, is wrapped as its own panels.

Which Bianchina body takes more film?

The Bianchina wagon takes more film than the convertible or sedan. The wagon needs up to about 38 ft (11.5 m) of 60-inch (1.52 m) film, while the convertible uses about 28 ft (8.5 m). The sedan falls between the two.

Can I wrap only the hood or the roof of a Bianchina?

Yes, you can wrap only the hood or the roof of a Bianchina as a partial wrap. Other options include mirror caps, a full chrome delete on window trim and badges, or clear paint protection film on the front end.