Wraps by car

Autobianchi Y10 wrap

This page covers the Autobianchi Y10 wrap, a vinyl wrap guide for the mini hatchback produced in three generations. The newest body is the third generation from 1992 to 1995, measuring 134.8 in (3,423 mm). A full wrap of that body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

3generations12.5 mof film for a full wrap

Autobianchi Y10, third generation, factory photo
Autobianchi Y10, third generation. Factory color shown.

Autobianchi Y10 wrap colors and ideas

  • Autobianchi Y10 black wrap
  • Autobianchi Y10 white wrap
  • Autobianchi Y10 gray wrap
  • Autobianchi Y10 silver wrap
  • Autobianchi Y10 red wrap
  • Autobianchi Y10 blue wrap
  • Autobianchi Y10 green wrap
  • Autobianchi Y10 yellow wrap
  • Autobianchi Y10 orange wrap
  • Autobianchi Y10 purple wrap
  • Autobianchi Y10 pink wrap
  • Autobianchi Y10 teal wrap
  • Autobianchi Y10 brown wrap
  • Autobianchi Y10 gold wrap
  • Autobianchi Y10 chrome wrap
  • Autobianchi Y10 color shift wrap
  • Autobianchi Y10 carbon fiber wrap
  • Autobianchi Y10 camo and patterned wrap

How much vinyl to wrap an Autobianchi Y10

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1995hatchback (3 doors)134.8 in (3,423 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)
1989–1992hatchback (3 doors)133.5 in (3,392 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)
1985–1988hatchback (3 doors)133.5 in (3,390 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Autobianchi Y10 wrap cost factors

The Autobianchi Y10 wrap cost depends on film type, condition of the paint, and how many panels you wrap. A full wrap of the third generation at 134.8 in (3,423 mm) needs about 41 ft (12.5 m) of film. Older generations at 133.5 in (3,390 mm) need about 39 ft (12 m). Labor changes with paint condition and how many parts must be removed.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Autobianchi Y10 wraps by generation

Swipe sideways. Tap a card for the full description.

Autobianchi Y10, third generation, factory photo
Factory color shown

1992–1995 Autobianchi Y10 hatchback (third generation)

1992–1995hatchback (3 doors)134.8 in (3,423 mm)

The third generation Autobianchi Y10 from 1992 to 1995 measures 134.8 in (3,423 mm). A full wrap of this body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Paint age matters on a car of these years because panels may be original or repainted, so a test spot comes before a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Autobianchi Y10, second generation, factory photo
Factory color shown

1989–1992 Autobianchi Y10 hatchback (second generation)

1989–1992hatchback (3 doors)133.5 in (3,392 mm)

The second generation Autobianchi Y10 from 1989 to 1992 has a three-door hatchback body. The size at 133.5 in (3,392 mm) means a full wrap needs about 39 ft (12 m) of 60-inch (1.52 m) cast film. The body style gives you a tailgate with fixed glass and two long side doors, so the film is cut into a few large panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Autobianchi Y10, first generation, factory photo
Factory color shown

1985–1988 Autobianchi Y10 hatchback (first generation)

1985–1988hatchback (3 doors)133.5 in (3,390 mm)

The first generation Autobianchi Y10 from 1985 to 1988 has a three-door hatchback body. This size at 133.5 in (3,390 mm) means a full wrap needs about 39 ft (12 m) of 60-inch (1.52 m) cast film. The body style means the tailgate glass is surrounded by film and each side door is one large piece.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on an Autobianchi Y10

A partial wrap on an Autobianchi Y10 can cover the roof, hood, or mirror caps. Autobianchi Y10 chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Autobianchi Y10: body, cut-outs and film

An Autobianchi Y10 vinyl wrap fits a small three-door hatchback body. The cars range from 133.5 in (3,390 mm) to 134.8 in (3,423 mm) long, so a full wrap uses about 39 to 41 ft (12 to 12.5 m) of film. The short roof and compact panels keep material use low for a complete color change.

Autobianchi Y10 wrap ideas include dealing with the tailgate and side doors. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Each of the two long side doors is covered with one large piece of film.

When you ask how much vinyl to wrap an Autobianchi Y10, the answer depends on the generation. The second and first generations need about 39 ft (12 m) of 60-inch (1.52 m) cast film. The third generation is slightly longer and takes about 41 ft (12.5 m).

Questions about wrapping an Autobianchi Y10

How much vinyl does it take to wrap an Autobianchi Y10?

A full wrap of the newest Autobianchi Y10 takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Earlier generations take about 39 ft (12 m) because they are slightly shorter.

Can I wrap only the hood or the roof of an Autobianchi Y10?

Yes, you can wrap only the hood or the roof of an Autobianchi Y10. A partial wrap can be one panel such as the hood, the roof, or the mirror caps.

Is an Autobianchi Y10 hard to wrap?

The Autobianchi Y10 is moderately hard to wrap because of its small size and a few details. The tailgate has the rear glass in it, so the film must end exactly at the edge of the glass. The two long side doors each need one large piece of film, which needs careful handling.

How many generations of the Autobianchi Y10 does this page cover?

This page covers three generations of the Autobianchi Y10. They are the first generation from 1985 to 1988, the second from 1989 to 1992, and the third from 1992 to 1995.