Wraps by car

Autobianchi Primula wrap

This page covers the Autobianchi Primula wrap in one generation of catalog data. A full vinyl wrap of the newest body takes about 38 to 44 feet of 60-inch cast film. The Primula was built from 1964 to 1970 as a mini car.

1generations11.5 mof film for a full wrap

Autobianchi Primula, first generation, factory photo
Autobianchi Primula, first generation. Factory color shown.

Autobianchi Primula wrap colors and ideas

  • Primula black wrap
  • Primula white wrap
  • Primula gray wrap
  • Primula silver wrap
  • Primula red wrap
  • Primula blue wrap
  • Primula green wrap
  • Primula yellow wrap
  • Primula orange wrap
  • Primula purple wrap
  • Primula pink wrap
  • Primula teal wrap
  • Primula brown wrap
  • Primula gold wrap
  • Primula chrome wrap
  • Primula color shift wrap
  • Primula carbon fiber wrap
  • Primula camo and patterned wrap

How much vinyl to wrap an Autobianchi Primula

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1964–1970coupe, hatchback, sedan (2 or 3 or 4 or 5 doors)146.3 in (3,715 mm) to 149.0 in (3,785 mm)about 38 ft (11.5 m) for the coupe to 44 ft (13.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m)

Primula wrap cost factors

Primula wrap cost depends on body style, film type, and how much of the car you cover. Film amounts run from 38 ft (11.5 m) for the coupe to 44 ft (13.5 m) for the hatchback. A chrome delete or patterned film can use up to 54 ft (16.5 m). Labor time changes with cutouts and the tailgate glass.

  • Film for a full wrap: about 38 ft (11.5 m) for the coupe to 44 ft (13.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).
  • Body: coupe, hatchback, sedan (2 or 3 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Primula wraps by generation

Swipe sideways. Tap a card for the full description.

Autobianchi Primula, first generation, factory photo
Factory color shown

1964–1970 Primula coupe, hatchback, sedan (first generation)

1964–1970coupe, hatchback, sedan (2 or 3 or 4 or 5 doors)146.3 in (3,715 mm) to 149.0 in (3,785 mm)

The first generation Primula runs from 1964 to 1970 and offers three body styles. The coupe, hatchback, and sedan each change the panel plan and the amount of film. The length varies from 146.3 in (3,715 mm) to 149.0 in (3,785 mm). A full wrap takes 38 to 44 ft (11.5 to 13.5 m) of 60-inch cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 38 ft (11.5 m) for the coupe to 44 ft (13.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Primula

A partial wrap on the Primula can cover the roof, hood, or mirror caps. Chromedelete covers window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end. These smaller jobs use less film and take less time than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Autobianchi Primula: body, cut-outs and film

The Autobianchi Primula vinyl wrap depends on its body styles: coupe, hatchback, and sedan. The length runs from 146.3 in (3,715 mm) to 149.0 in (3,785 mm). These small dimensions mean a full wrap uses 38 to 44 ft (11.5 to 13.5 m) of film. Each style has a different panel plan.

Primula wrap ideas must account for the tailgate with the rear glass in it. The film ends at the edge of the glass, so a clean edge needs careful work. Door handles and badges come off for a better finish. The front bumper is small and can stay on during wrapping.

To know how much vinyl to wrap a Primula, compare the three body styles. The coupe needs about 38 ft (11.5 m) and the hatchback up to 44 ft (13.5 m) of 60-inch film. Chrome or patterned film can raise the total to about 54 ft (16.5 m). The sedan sits between the coupe and hatchback in film use.

Questions about wrapping an Autobianchi Primula

How much vinyl does it take to wrap an Autobianchi Primula?

A full wrap of an Autobianchi Primula takes about 38 ft (11.5 m) to 44 ft (13.5 m) of 60-inch cast film. The coupe uses the lower amount and the hatchback the higher amount. The sedan falls in between.

Which Primula body takes more film?

The hatchback body of the Primula takes more film than the coupe or sedan. The hatchback needs up to 44 ft (13.5 m) while the coupe uses about 38 ft (11.5 m). The sedan is between those figures.

Can I wrap only the hood or the roof of a Primula?

Yes, you can wrap only the hood or the roof of a Primula. A partial wrap can cover the roof, hood, or mirror caps. These jobs need much less film than a full wrap.

Is a Primula hard to wrap?

A Primula is not hard to wrap, but the tailgate with the rear glass in it adds work. The film must end cleanly at the edge of the glass. The small size of the car also means fewer large panels.