Wraps by car

BMW 02 (E10) wrap

The BMW 02 (E10) wrap page covers the first-generation 02 series built from 1966 to 1977. The model came in three body styles: a two-door sedan, a three-door hatchback, and a convertible. A full vinyl wrap of the newest convertible takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

BMW 02 (E10), first generation, factory photo
BMW 02 (E10), first generation. Factory color shown.

BMW 02 (E10) wrap colors and ideas

  • 02 (E10) black wrap
  • 02 (E10) white wrap
  • 02 (E10) gray wrap
  • 02 (E10) silver wrap
  • 02 (E10) red wrap
  • 02 (E10) blue wrap
  • 02 (E10) green wrap
  • 02 (E10) yellow wrap
  • 02 (E10) orange wrap
  • 02 (E10) purple wrap
  • 02 (E10) pink wrap
  • 02 (E10) teal wrap
  • 02 (E10) brown wrap
  • 02 (E10) gold wrap
  • 02 (E10) chrome wrap
  • 02 (E10) color shift wrap
  • 02 (E10) carbon fiber wrap
  • 02 (E10) camo and patterned wrap

How much vinyl to wrap a BMW 02 (E10)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1966–1977convertible, hatchback, sedan (2 or 3 doors)161.8 in (4,110 mm) to 166.5 in (4,230 mm)about 44 ft (13.5 m) for the convertible to 48 ft (14.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

02 (E10) wrap cost factors

02 (E10) wrap cost is driven by the amount of film, the body style, and the condition of the paint. The convertible uses less film than the hatchback, but its trim and top edges add labor. Any rust repair or paint correction before installation will also change the total work.

  • Film for a full wrap: about 44 ft (13.5 m) for the convertible to 48 ft (14.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: convertible, hatchback, sedan (2 or 3 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

02 (E10) wraps by generation

Swipe sideways. Tap a card for the full description.

BMW 02 (E10), first generation, factory photo
Factory color shown

1966–1977 02 (E10) convertible, hatchback, sedan (first generation)

1966–1977convertible, hatchback, sedan (2 or 3 doors)161.8 in (4,110 mm) to 166.5 in (4,230 mm)

On the first-generation BMW 02 (E10), the convertible body has a fabric top that is not wrapped. The vinyl film ends where the fabric begins, leaving the top in its original color. If the car has a folding hard top, that top is wrapped as separate panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the convertible to 48 ft (14.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a 02 (E10)

A partial wrap on a BMW 02 (E10) can cover just the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW 02 (E10): body, cut-outs and film

A BMW 02 (E10) vinyl wrap follows the car's compact, boxy lines and short overhangs. The sedan and hatchback bodies measure 161.8 in (4,110 mm) to 166.5 in (4,230 mm) long, so a single roll width covers most panels without seams. The convertible's fabric top is not wrapped, which reduces the amount of film needed.

02 (E10) wrap ideas often include a chrome delete on the window trim and badges. The tailgate on hatchback models has the rear glass set into it, so the film must end at the edge of the glass. On the convertible, the top is left unwrapped and the film stops where the fabric begins.

How much vinyl to wrap a 02 (E10) depends mainly on the body style. A convertible needs about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, while the hatchback uses about 48 ft (14.5 m). If you choose chrome or patterned film, allow up to about 59 ft (18 m) for the extra material.

Questions about wrapping a BMW 02 (E10)

How much vinyl does it take to wrap a BMW 02 (E10)?

It takes about 44 ft (13.5 m) to 48 ft (14.5 m) of 60-inch (1.52 m) cast film for the newest body of the BMW 02 (E10). The convertible uses about 44 ft (13.5 m), and the hatchback uses about 48 ft (14.5 m). Chrome or patterned film can push the total up to about 59 ft (18 m).

Is the top of a 02 (E10) wrapped?

No, the top of a 02 (E10) is not wrapped when it is a fabric convertible top. The film ends where the fabric begins, so the top keeps its original color. A folding hard top, if fitted, is wrapped as its own set of panels.

Which 02 (E10) body takes more film?

The hatchback body takes more film than the convertible in the BMW 02 (E10) lineup. The hatchback needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, while the convertible needs about 44 ft (13.5 m). The sedan falls between those figures depending on options.

Can I wrap only the hood or the roof of a 02 (E10)?

Yes, you can wrap only the hood or the roof of a 02 (E10). A partial wrap covers those areas with vinyl while leaving the rest of the paint exposed. Mirror caps can also be wrapped on their own.