Wraps by car

BMW 1 series wrap

This page covers the BMW 1 series wrap across four generations, from 2004 to the present. A full wrap of the newest F70 body uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. A vinyl wrap changes the look of every panel of the car, including bumpers and mirrors.

4generations15.5 mof film for a full wrap

BMW 1 series, fourth generation, factory photo
BMW 1 series, fourth generation. Factory color shown.

BMW 1 series wrap colors and ideas

  • BMW 1 series black wrap
  • BMW 1 series white wrap
  • BMW 1 series gray wrap
  • BMW 1 series silver wrap
  • BMW 1 series red wrap
  • BMW 1 series blue wrap
  • BMW 1 series green wrap
  • BMW 1 series yellow wrap
  • BMW 1 series orange wrap
  • BMW 1 series purple wrap
  • BMW 1 series pink wrap
  • BMW 1 series teal wrap
  • BMW 1 series brown wrap
  • BMW 1 series gold wrap
  • BMW 1 series chrome wrap
  • BMW 1 series color shift wrap
  • BMW 1 series carbon fiber wrap
  • BMW 1 series camo and patterned wrap

How much vinyl to wrap a BMW 1 series

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowhatchback (5 doors)171.7 in (4,361 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2019–2024hatchback (5 doors)170.0 in (4,319 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2011–2019hatchback, sedan (3 or 4 or 5 doors)170.2 in (4,324 mm) to 175.4 in (4,456 mm)about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)
2004–2013convertible, coupe, hatchback (2 or 3 or 5 doors)166.4 in (4,227 mm) to 171.7 in (4,360 mm)about 46 ft (14 m) for the convertible to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

BMW 1 series wrap cost factors

The BMW 1 series wrap cost depends on the amount of film the body needs and the labour for the details. A first-generation convertible uses about 46 ft (14 m) of cast film, while a second-generation sedan uses about 56 ft (17 m). Parking sensors and cameras on newer trims mean more time cutting the film around each sensor and lens. A body with a panoramic glass roof reduces the film needed for the roof but adds time to keep the edges clean.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

BMW 1 series wraps by generation

Swipe sideways. Tap a card for the full description.

BMW 1 series, fourth generation, factory photo
Factory color shown

2024–now BMW 1 series hatchback (fourth generation)

2024–nowhatchback (5 doors)171.7 in (4,361 mm)

The fourth-generation BMW 1 series is a five-door hatchback that is 171.7 in (4,361 mm) long. This size and body style mean a full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The hatch has mostly flat panels, but the tailgate with the rear glass in it needs the film to end at the edge of the glass. Parking sensors and cameras in every trim of this generation add fine cut-outs around each sensor and lens.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

BMW 1 series, third generation, factory photo
Factory color shown

2019–2024 BMW 1 series hatchback (third generation)

2019–2024hatchback (5 doors)170.0 in (4,319 mm)

The third-generation BMW 1 series has a glass roof on some trims, and glass is not wrapped. A panoramic glass roof means the roof film ends at the roof rails, and a sunroof means the roof film is cut around its opening. The rest of the body is a five-door hatchback with a tailgate that has the rear glass in it. For those trims, the roof stays dark whatever the color of the film chosen for the metal panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

BMW 1 series, second generation, factory photo
Factory color shown

2011–2019 BMW 1 series hatchback, sedan (second generation)

2011–2019hatchback, sedan (3 or 4 or 5 doors)170.2 in (4,324 mm) to 175.4 in (4,456 mm)

The second-generation BMW 1 series was restyled in 2015 and again in 2017, with different bumpers and lights. Film kits cut for one version will not fit the other, so a wrapper must check which front end the car has. The generation includes a hatchback and a sedan, with lengths from 170.2 in (4,324 mm) to 175.4 in (4,456 mm). Every trim has fog lamps in the front bumper, which need cut-outs in the bumper film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

BMW 1 series, first generation, factory photo
Factory color shown

2004–2013 BMW 1 series convertible, coupe, hatchback (first generation)

2004–2013convertible, coupe, hatchback (2 or 3 or 5 doors)166.4 in (4,227 mm) to 171.7 in (4,360 mm)

The first-generation BMW 1 series was built from 2004 to 2013, so paint age varies from original to repainted. A test spot is important before a full wrap to make sure the film will adhere to the older paint. This generation has a convertible, coupe, and hatchback with lengths from 166.4 in (4,227 mm) to 171.7 in (4,360 mm). A convertible with a fabric top is not wrapped on the top, and the film ends where the top begins.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) for the convertible to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a BMW 1 series

A partial wrap on the BMW 1 series covers the roof, hood, or mirror caps for less work than a full wrap. A BMW 1 series chrome delete covers the window trim and badges with black film, changing the bright trim to a darker look. Paint protection film (PPF) is a clear film applied to the front end to protect the paint from stone chips. These smaller jobs use a fraction of the film needed for a full wrap and take less time to finish.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BMW 1 series: body, cut-outs and film

The BMW 1 series vinyl wrap amount depends on the body style and the length of the car. The longest first-generation body is 171.7 in (4,360 mm), while the fourth generation is 171.7 in (4,361 mm). Hatchback bodies need about 49 ft (15 m) of film, and the second-generation sedan needs up to 56 ft (17 m). The number of panels stays the same for every body, but larger panels use more material.

BMW 1 series wrap ideas work best when you plan for the parts that need extra attention. Every generation has a tailgate with the rear glass in it, so the film ends at the edge of the glass. Parking sensors in the bumpers require the film to be cut around each sensor on every trim of the latest cars. Cameras and fog lamps also need cut-outs on some trims, and the installer may remove door handles and mirror caps for a cleaner finish.

How much vinyl to wrap a BMW 1 series changes between generations because the body sizes are not the same. The first generation is 166.4 in (4,227 mm) to 171.7 in (4,360 mm) long, and the second generation is 170.2 in (4,324 mm) to 175.4 in (4,456 mm). The fourth generation is 171.7 in (4,361 mm), close to the first but with different bumper shapes. You can count on about 46 ft (14 m) for an early convertible and about 56 ft (17 m) for a second-generation sedan.

Questions about wrapping a BMW 1 series

How much vinyl does it take to wrap a BMW 1 series?

About 51 ft (15.5 m) of 60-inch (1.52 m) cast film is needed for a full wrap of the newest BMW 1 series F70. That figure covers all painted panels, with extra film for cut-outs around parking sensors and cameras. The film comes in rolls 60 inches wide, and 51 ft gives enough to wrap the hatchback body. Older generations use similar amounts, from 46 ft (14 m) for a first-generation convertible to 56 ft (17 m) for a second-generation sedan.

Can I wrap only the hood or the roof of a BMW 1 series?

Yes, you can wrap only the hood or the roof of a BMW 1 series as a partial wrap. A partial wrap on this car may cover the roof, hood, or mirror caps, and it uses less film than a full wrap. A chrome delete of the window trim and badges is another smaller job on the same car. Paint protection film on the front end is clear and protects the paint from stone chips.

Is a BMW 1 series hard to wrap?

The BMW 1 series is a compact car, but some parts add work to a wrap. The tailgate has the rear glass in it, so the film must end at the edge of the glass on every generation. Parking sensors in the bumpers require the film to be cut around each sensor on the newest cars. Cameras and fog lamps on some trims also need cut-outs, and a panoramic glass roof means the roof panel is not wrapped at all.

How many generations of the BMW 1 series does this page cover?

This page covers four generations of the BMW 1 series, from 2004 to the present. The first generation was built from 2004 to 2013, the second from 2011 to 2019, the third from 2019 to 2024, and the fourth from 2024 onward. Each generation has its own body styles and wrap film estimates in the sections above. The newest generation is the F70 hatchback, which uses about 51 ft (15.5 m) of film for a full wrap.