Wraps by car

BMW 1M wrap

This page covers the BMW 1M and its vinyl wrap, a single-generation model built from 2010 to 2012. The 1M is a compact coupe with two doors and a length of 172.4 in (4,380 mm). A full wrap of this body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

1generations14.5 mof film for a full wrap

BMW 1M, first generation, factory photo
BMW 1M, first generation. Factory color shown.

BMW 1M wrap colors and ideas

  • BMW 1M black wrap
  • BMW 1M white wrap
  • BMW 1M gray wrap
  • BMW 1M silver wrap
  • BMW 1M red wrap
  • BMW 1M blue wrap
  • BMW 1M green wrap
  • BMW 1M yellow wrap
  • BMW 1M orange wrap
  • BMW 1M purple wrap
  • BMW 1M pink wrap
  • BMW 1M teal wrap
  • BMW 1M brown wrap
  • BMW 1M gold wrap
  • BMW 1M chrome wrap
  • BMW 1M color shift wrap
  • BMW 1M carbon fiber wrap
  • BMW 1M camo and patterned wrap

How much vinyl to wrap a BMW 1M

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2012coupe (2 doors)172.4 in (4,380 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

BMW 1M wrap cost factors

BMW 1M wrap cost depends on the film and the labor. This compact coupe needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, and chrome or patterned film raises the amount to about 61 ft (18.5 m). The two long doors and the camera cut-outs add time to the install.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has cameras in the body: the film is cut around each lens.

BMW 1M wraps by generation

Swipe sideways. Tap a card for the full description.

BMW 1M, first generation, factory photo
Factory color shown

2010–2012 BMW 1M coupe (first generation)

2010–2012coupe (2 doors)172.4 in (4,380 mm)

The first generation BMW 1M, built from 2010 to 2012, is the only body this page covers. Panels on a car of these years may be original or repainted, so a test spot comes before a full wrap. A shop checks paint adhesion on each panel before stretching film over the 172.4 in (4,380 mm) body.

Two long side doors: each door is one large piece of film.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a BMW 1M

For the BMW 1M, a partial wrap covers the roof, hood, or mirror caps. A chrome delete changes the window trim and badges to black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW 1M: body, cut-outs and film

A BMW 1M vinyl wrap fits a compact coupe with two long doors and no B-pillar. Each door is one large piece of film, which means careful alignment on the upper edges and handles. The overall length of 172.4 in (4,380 mm) keeps the roof and rear quarters manageable for a two-person install.

BMW 1M wrap ideas start with the clean sides of the E82 coupe, but the body has details to address. Every trim has cameras in the body, so the film is cut around each lens. The window trim and badges can be removed or masked for a chrome delete.

The question how much vinyl to wrap a BMW 1M has one answer for this car, since the page covers only the first generation built from 2010 to 2012. Film needs do not change between model years, because the body remained the same coupe. The estimate of about 48 ft (14.5 m) of 60-inch (1.52 m) cast film applies to every 1M.

Questions about wrapping a BMW 1M

How much vinyl does it take to wrap a BMW 1M?

Yes, a BMW 1M takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap, and about 61 ft (18.5 m) for chrome or patterned film.

Can I wrap only the hood or the roof of a BMW 1M?

Yes, you can wrap only the hood or the roof of a BMW 1M, and the same applies to mirror caps and other partial areas.

Is a BMW 1M hard to wrap?

Yes, a BMW 1M has two long side doors that each need one large piece of film, plus camera lenses on every trim that require careful cut-outs.

How many generations of the BMW 1M does this page cover?

This page covers one generation of the BMW 1M, the first generation built from 2010 to 2012.