Wraps by car

BMW 3-15 wrap

The BMW 3-15 wrap page covers all three generations of the subcompact BMW 3-15, from 1927 to 1932. The newest body is the third generation sedan, built from 1931 to 1932. A full vinyl wrap of that two-door sedan takes about 36 ft (11 m) of 60-inch (1.52 m) cast film.

3generations11 mof film for a full wrap

BMW 3-15, third generation, factory photo
BMW 3-15, third generation. Factory color shown.

BMW 3-15 wrap colors and ideas

  • BMW 3-15 black wrap
  • BMW 3-15 white wrap
  • BMW 3-15 gray wrap
  • BMW 3-15 silver wrap
  • BMW 3-15 red wrap
  • BMW 3-15 blue wrap
  • BMW 3-15 green wrap
  • BMW 3-15 yellow wrap
  • BMW 3-15 orange wrap
  • BMW 3-15 purple wrap
  • BMW 3-15 pink wrap
  • BMW 3-15 teal wrap
  • BMW 3-15 brown wrap
  • BMW 3-15 gold wrap
  • BMW 3-15 chrome wrap
  • BMW 3-15 color shift wrap
  • BMW 3-15 carbon fiber wrap
  • BMW 3-15 camo and patterned wrap

How much vinyl to wrap a BMW 3-15

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1931–1932sedan (2 doors)118.1 in (3,000 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m)
1929–1931sedan (3 doors)118.1 in (3,000 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m)
1927–1929convertible (2 doors)118.1 in (3,000 mm)about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m)

BMW 3-15 wrap cost factors

The BMW 3-15 wrap cost depends mainly on the body style, the film type, and the condition of the paint. The convertible body uses slightly less film than the sedans, about 34 ft (10.5 m) instead of 36 ft (11 m). Chrome or patterned film requires about 43 ft (13 m) for any of the three generations. Paint age matters because panels from 1927 to 1932 may be original or repainted.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).
  • Body: sedan (2 doors).
  • Two long side doors: each door is one large piece of film.

BMW 3-15 wraps by generation

Swipe sideways. Tap a card for the full description.

BMW 3-15, third generation, factory photo
Factory color shown

1931–1932 BMW 3-15 sedan (third generation)

1931–1932sedan (2 doors)118.1 in (3,000 mm)

The third generation BMW 3-15, made from 1931 to 1932, is a two-door sedan. Paint age is a key concern: many panels may be original or repainted, and a test spot should be done before a full wrap. The installer checks adhesion on a small area first to avoid lifting old paint.

Two long side doors: each door is one large piece of film.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).

BMW 3-15, second generation, factory photo
Factory color shown

1929–1931 BMW 3-15 sedan (second generation)

1929–1931sedan (3 doors)118.1 in (3,000 mm)

The second generation BMW 3-15, built from 1929 to 1931, is a three-door sedan. Its size and body style keep the amount of film at about 36 ft (11 m) of 60-inch (1.52 m) cast film. The two long side doors each form one large panel, so the number of pieces is low.

Two long side doors: each door is one large piece of film.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).

BMW 3-15, first generation, factory photo
Factory color shown

1927–1929 BMW 3-15 convertible (first generation)

1927–1929convertible (2 doors)118.1 in (3,000 mm)

The first generation BMW 3-15, from 1927 to 1929, is a two-door convertible. The open top is not wrapped: the vinyl ends cleanly where the fabric begins. If the car has a folding hard top, that top is wrapped as separate panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).

Roof, hood, chrome delete and PPF on a BMW 3-15

For a BMW 3-15, partial wrap jobs include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW 3-15: body, cut-outs and film

A BMW 3-15 vinyl wrap is sized by the car's compact body: every generation is 118.1 in (3,000 mm) long. The sedan and convertible bodies have only two doors, so the side panels are few. Each long side door is wrapped as one large piece of film, which reduces the number of seams.

BMW 3-15 wrap ideas for these cars must respect the large door cut-outs. The side doors are one continuous panel, so the installer cuts around the handles and hinges with care. On the convertible, the fabric top is not wrapped, and the film ends where the top begins. A folding hard top, if present, is wrapped as its own panels.

To plan how much vinyl to wrap a BMW 3-15, check the body style and the film type. All three generations share the same length, but the convertible needs about 34 ft (10.5 m) of cast film. The sedans use about 36 ft (11 m). If you choose chrome or patterned film, the estimate rises to about 43 ft (13 m) for any generation.

Questions about wrapping a BMW 3-15

How much vinyl does it take to wrap a BMW 3-15?

About 36 ft (11 m) of 60-inch (1.52 m) cast film is needed to wrap a BMW 3-15. This figure applies to the newest body, the third generation sedan. Chrome or patterned film would require about 43 ft (13 m) for the same car.

Can I wrap only the hood or the roof of a BMW 3-15?

Yes, you can wrap only the hood or the roof of a BMW 3-15. A partial wrap is a common choice for these small cars. The roof and hood are simple panels, and the same film is used as in a full wrap.

Is a BMW 3-15 hard to wrap?

A BMW 3-15 is not especially hard to wrap, but its age and body details add work. The two long side doors each require one large piece of film that must be laid without wrinkles. On the convertible, the fabric top must be masked off so the film ends precisely.

How many generations of the BMW 3-15 does this page cover?

This page covers three generations of the BMW 3-15. The first generation is the 1927–1929 convertible, the second is the 1929–1931 three-door sedan, and the third is the 1931–1932 two-door sedan.