Wraps by car

BMW 3200 wrap

This page covers the BMW 3200, a sports car produced from 1962 to 1965 in one generation. The coupe body with two doors measures 190.9 in (4,850 mm) long. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

1generations17.5 mof film for a full wrap

BMW 3200, first generation, factory photo
BMW 3200, first generation. Factory color shown.

BMW 3200 wrap colors and ideas

  • BMW 3200 black wrap
  • BMW 3200 white wrap
  • BMW 3200 gray wrap
  • BMW 3200 silver wrap
  • BMW 3200 red wrap
  • BMW 3200 blue wrap
  • BMW 3200 green wrap
  • BMW 3200 yellow wrap
  • BMW 3200 orange wrap
  • BMW 3200 purple wrap
  • BMW 3200 pink wrap
  • BMW 3200 teal wrap
  • BMW 3200 brown wrap
  • BMW 3200 gold wrap
  • BMW 3200 chrome wrap
  • BMW 3200 color shift wrap
  • BMW 3200 carbon fiber wrap
  • BMW 3200 camo and patterned wrap

How much vinyl to wrap a BMW 3200

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1962–1965coupe (2 doors)190.9 in (4,850 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

BMW 3200 wrap cost factors

The BMW 3200 wrap cost depends on the film amount needed for the 190.9 in (4,850 mm) body. A full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) film. Chrome or patterned film raises the amount to about 66 ft (20 m). Labor is also a factor because the doors are large single pieces.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

BMW 3200 wraps by generation

Swipe sideways. Tap a card for the full description.

BMW 3200, first generation, factory photo
Factory color shown

1962–1965 BMW 3200 coupe (first generation)

1962–1965coupe (2 doors)190.9 in (4,850 mm)

The first generation BMW 3200 was built from 1962 to 1965 as a two-door coupe. Paint age varies on these cars because panels may be original or repainted. A test spot comes before a full wrap to check how the surface behaves.

Two long side doors: each door is one large piece of film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a BMW 3200

Partial wrap options for a BMW 3200 include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) in clear film can be applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW 3200: body, cut-outs and film

A BMW 3200 vinyl wrap involves covering the two-door coupe body, which is 190.9 in (4,850 mm) long. The large body panels mean you need about 57 ft (17.5 m) of 60-inch (1.52 m) film for a full wrap. Working on a car of this size requires careful planning for each section.

For BMW 3200 wrap ideas, focus on the two long side doors, which are each one large piece of film. The door handles and trim need cut-outs for a clean finish. Removing badges and other small parts before wrapping gives better edges.

To figure how much vinyl to wrap a BMW 3200, you need about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. This estimate is for the first generation body produced from 1962 to 1965. The amount of film depends on the film width and the size of the panels.

Questions about wrapping a BMW 3200

How much vinyl does it take to wrap a BMW 3200?

About 57 ft (17.5 m) of 60-inch (1.52 m) cast film is needed to wrap a BMW 3200. This estimate is for the full body of the coupe. Chrome or patterned film increases the amount to about 66 ft (20 m).

Can I wrap only the hood or the roof of a BMW 3200?

Yes, you can wrap only the hood or the roof of a BMW 3200. Partial wrap jobs also include mirror caps. A chrome delete on the window trim and badges is another smaller option.

Is a BMW 3200 hard to wrap?

The BMW 3200 is not hard to wrap if you plan for its large body, which is 190.9 in (4,850 mm) long. Each of the two long side doors is one large piece of film, which adds work. Removing parts like badges before wrapping helps achieve clean edges.

How many generations of the BMW 3200 does this page cover?

This page covers one generation of the BMW 3200, produced from 1962 to 1965. The only body style is a two-door coupe. All information is based on that single generation.