Wraps by car

BMW 340 wrap

This page covers the BMW 340 wrap for the single generation made from 1949 to 1955. The BMW 340 is a subcompact sedan with four doors and a classic body shape. A full vinyl wrap of this body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The information here helps you plan the film, the surfaces, and the work.

1generations17.5 mof film for a full wrap

BMW 340, first generation, factory photo
BMW 340, first generation. Factory color shown.

BMW 340 wrap colors and ideas

  • BMW 340 black wrap
  • BMW 340 white wrap
  • BMW 340 gray wrap
  • BMW 340 silver wrap
  • BMW 340 red wrap
  • BMW 340 blue wrap
  • BMW 340 green wrap
  • BMW 340 yellow wrap
  • BMW 340 orange wrap
  • BMW 340 purple wrap
  • BMW 340 pink wrap
  • BMW 340 teal wrap
  • BMW 340 brown wrap
  • BMW 340 gold wrap
  • BMW 340 chrome wrap
  • BMW 340 color shift wrap
  • BMW 340 carbon fiber wrap
  • BMW 340 camo and patterned wrap

How much vinyl to wrap a BMW 340

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1949–1955sedan (4 doors)181.1 in (4,600 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

BMW 340 wrap cost factors

The BMW 340 wrap cost depends on the film you pick and the condition of the body. A full wrap of this 181.1 in (4,600 mm) sedan takes about 57 ft (17.5 m) of 60-inch (1.52 m) film, and a pattern or chrome film adds about 9 ft (2.8 m). The cost also changes with the amount of disassembly for the chrome trim, the badges, and the door handles. You pay for the time a technician spends on the curved fenders and the four-door openings.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

BMW 340 wraps by generation

Swipe sideways. Tap a card for the full description.

BMW 340, first generation, factory photo
Factory color shown

1949–1955 BMW 340 sedan (first generation)

1949–1955sedan (4 doors)181.1 in (4,600 mm)

The paint age on a car of these years is the first thing a wrap shop checks. A BMW 340 from 1949 to 1955 may have original or repainted panels. You test a small spot before the full wrap to see how the adhesive behaves. That protects old paint and shows what surface prep is needed.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a BMW 340

A partial wrap on a BMW 340 covers the roof, the hood, or the mirror caps as a smaller job. You can also order a chrome delete for the window trim and the badges, which uses black film on the bright parts. Paint protection film (PPF) is another option: a clear film on the front end of this sedan. Each of these jobs leaves the rest of the paint visible and uses less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW 340: body, cut-outs and film

A BMW 340 vinyl wrap fits one body style from these years: the four-door sedan. The car is 181.1 in (4,600 mm) long, which is modest for a full wrap. You work on a subcompact with tight panel gaps and curved fenders. That shape rewards careful trimming and a steady hand.

On a BMW 340, wrap ideas start with the flat sides and the rounded roof. The door handles, the badges, and the chrome trim need cut-outs or removal before the film goes on. You pull the mirrors, the front grille, and the bumper trim for clean edges. The rear lights sit close to the body, so you leave a small relief at each corner.

How much vinyl to wrap a BMW 340 depends on one generation only. The 1949–1955 sedan shares its body with no later BMW 340, so one estimate covers every car of these years. You count about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for one color. A chrome or patterned film needs about 66 ft (20 m) because the pattern must run one way.

Questions about wrapping a BMW 340

How much vinyl does it take to wrap a BMW 340?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a BMW 340 in one color. A chrome or patterned film needs about 66 ft (20 m) because the pattern must be matched. These figures cover the full four-door sedan body of the only generation, 1949–1955. The shop adds a few feet for cutting and warm-up on curved areas.

Can I wrap only the hood or the roof of a BMW 340?

Yes, you can wrap only the hood or the roof of a BMW 340. A partial wrap on this sedan covers the roof, the hood, or the mirror caps as a smaller job. You can also order a chrome delete for the window trim and the badges instead of a full color change. The work is smaller and you buy less film.

Is a BMW 340 hard to wrap?

A BMW 340 is not hard to wrap for a trained installer. The four-door sedan body is small at 181.1 in (4,600 mm), but the curved fenders and the tight chrome trim add work. You remove the door handles, the badges, and the mirror caps for clean edges. The old paint on this 1949–1955 car often needs a test spot and extra prep.

How many generations of the BMW 340 does this page cover?

This page covers one generation of the BMW 340. The only body is the first generation, made from 1949 to 1955. There are no other generations in the catalog. You plan with the same film and body data for every car of this model.