Wraps by car

BMW 502 wrap

The BMW 502 wrap page covers the single generation produced from 1954 to 1961. This luxury model came as a convertible, coupe, and sedan with two or four doors. A full wrap of the newest body takes about 49 ft (15 m) of vinyl for the convertible to 57 ft (17.5 m) for the sedan. The film width needed is 60 inches (1.52 m) of cast vinyl.

1generations15 mof film for a full wrap

BMW 502, first generation, factory photo
BMW 502, first generation. Factory color shown.

BMW 502 wrap colors and ideas

  • BMW 502 black wrap
  • BMW 502 white wrap
  • BMW 502 gray wrap
  • BMW 502 silver wrap
  • BMW 502 red wrap
  • BMW 502 blue wrap
  • BMW 502 green wrap
  • BMW 502 yellow wrap
  • BMW 502 orange wrap
  • BMW 502 purple wrap
  • BMW 502 pink wrap
  • BMW 502 teal wrap
  • BMW 502 brown wrap
  • BMW 502 gold wrap
  • BMW 502 chrome wrap
  • BMW 502 color shift wrap
  • BMW 502 carbon fiber wrap
  • BMW 502 camo and patterned wrap

How much vinyl to wrap a BMW 502

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1954–1961convertible, coupe, sedan (2 or 4 doors)186.2 in (4,730 mm)about 49 ft (15 m) for the convertible to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

BMW 502 wrap cost factors

BMW 502 wrap cost depends on body style, film type, and the amount of labor involved. The sedan needs more film than the convertible due to the fixed roof. Chrome or patterned film can raise the material amount to about 67 ft (20.5 m). The installer's time for cut-outs and removing parts also affects the final cost.

  • Film for a full wrap: about 49 ft (15 m) for the convertible to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

BMW 502 wraps by generation

Swipe sideways. Tap a card for the full description.

BMW 502, first generation, factory photo
Factory color shown

1954–1961 BMW 502 convertible, coupe, sedan (first generation)

1954–1961convertible, coupe, sedan (2 or 4 doors)186.2 in (4,730 mm)

The open top of the BMW 502 is treated differently in a wrap. A fabric top is not wrapped, and the film ends where the fabric begins. If the car has a folding hard top, that top is wrapped as its own panels. The film lines are usually placed at the natural seams of the body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 49 ft (15 m) for the convertible to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a BMW 502

The BMW 502 can receive smaller jobs such as a partial wrap on the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These options allow you to change the look without wrapping the entire car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW 502: body, cut-outs and film

A BMW 502 vinyl wrap changes with body style because the convertible, coupe, and sedan differ in length and roof surface. The car is 186.2 in (4,730 mm) long, which gives a clear idea of the area to cover. The sedan needs the most film due to its fixed roof and larger closed panels. The convertible needs less because the fabric top is not wrapped.

BMW 502 wrap ideas should account for the parts that need cut-outs or come off. The convertible top is not wrapped, and the film ends where the fabric begins. A folding hard top is wrapped as separate panels of its own. Door handles, trim, and badges often need to be removed or masked for a clean install.

How much vinyl to wrap a BMW 502 depends on body style and whether you choose extra coverage. The estimate is about 49 ft (15 m) for the convertible to 57 ft (17.5 m) for the sedan. Using 60-inch (1.52 m) cast film, chrome or patterned film can require up to about 67 ft (20.5 m). The film estimate changes between generations because only one generation exists in the catalog.

Questions about wrapping a BMW 502

How much vinyl does it take to wrap a BMW 502?

A BMW 502 takes about 49 ft (15 m) of vinyl for the convertible to 57 ft (17.5 m) for the sedan. The estimate uses 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 67 ft (20.5 m).

Is the top of a BMW 502 wrapped?

No, the fabric top of a BMW 502 is not wrapped. The film ends where the fabric begins. A folding hard top is wrapped as separate panels of its own.

Which BMW 502 body takes more film?

The sedan takes more film than the convertible. The sedan needs about 57 ft (17.5 m) while the convertible needs about 49 ft (15 m). The coupe falls between the two, and the estimate for the sedan is the highest.

Can I wrap only the hood or the roof of a BMW 502?

Yes, you can wrap only the hood or the roof of a BMW 502. A partial wrap can cover the roof, hood, or mirror caps. This is a smaller job than a full wrap and still changes the car's appearance.