Wraps by car

BMW 503 wrap

The BMW 503 wrap page covers the 1956–1959 sports car in both body styles and the vinyl wrap it takes. One generation is in the catalog, with a convertible and a coupe. A full wrap of the newest body uses about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe.

1generations15 mof film for a full wrap

BMW 503, first generation, factory photo
BMW 503, first generation. Factory color shown.

BMW 503 wrap colors and ideas

  • BMW 503 black wrap
  • BMW 503 white wrap
  • BMW 503 gray wrap
  • BMW 503 silver wrap
  • BMW 503 red wrap
  • BMW 503 blue wrap
  • BMW 503 green wrap
  • BMW 503 yellow wrap
  • BMW 503 orange wrap
  • BMW 503 purple wrap
  • BMW 503 pink wrap
  • BMW 503 teal wrap
  • BMW 503 brown wrap
  • BMW 503 gold wrap
  • BMW 503 chrome wrap
  • BMW 503 color shift wrap
  • BMW 503 carbon fiber wrap
  • BMW 503 camo and patterned wrap

How much vinyl to wrap a BMW 503

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1956–1959convertible, coupe (2 doors)187.0 in (4,750 mm)about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

BMW 503 wrap cost factors

BMW 503 wrap cost depends on the body style, the film type, and the amount of trim work. A coupe uses more film than a convertible because the roof adds surface area. Chrome or patterned film pushes the material need up to about 62 ft (19 m). Removing the badges and window trim for a chrome delete adds labor.

  • Film for a full wrap: about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

BMW 503 wraps by generation

Swipe sideways. Tap a card for the full description.

BMW 503, first generation, factory photo
Factory color shown

1956–1959 BMW 503 convertible, coupe (first generation)

1956–1959convertible, coupe (2 doors)187.0 in (4,750 mm)

The first-generation BMW 503 in convertible form has a fabric top that is not wrapped. The vinyl film ends where the fabric begins, so the top is left as it is. If the car has a folding hard top, that top is wrapped as panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a BMW 503

A partial wrap on a BMW 503 can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film often applied to the front end of this sports car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW 503: body, cut-outs and film

The BMW 503 vinyl wrap follows two body styles: a convertible and a two-door coupe. The car is 187.0 in (4,750 mm) long, so a full wrap uses about 49 ft (15 m) to 51 ft (15.5 m) of 60-inch (1.52 m) cast film. A wrap installer lays the film in large panels over the long hood and rear fenders. The two long side doors are each covered with one large piece of film.

BMW 503 wrap ideas include clear paint protection film (PPF) on the front end and a chrome delete with black film. The window trim and badges come off or are masked, and the door handles need cut-outs. The fabric top on the convertible is not wrapped, so the film ends where it begins. On a coupe, the roof is wrapped as its own panel.

How much vinyl to wrap a BMW 503 depends on which body you have. The convertible takes about 49 ft (15 m) of 60-inch (1.52 m) film, while the coupe takes about 51 ft (15.5 m). The coupe needs more material because its roof is wrapped. If you add chrome or patterned film, plan for up to about 62 ft (19 m).

Questions about wrapping a BMW 503

How much vinyl does it take to wrap a BMW 503?

It takes about 49 ft (15 m) to 51 ft (15.5 m) of vinyl to wrap a BMW 503. The convertible is at the lower end, and the coupe is at the higher end. These figures assume 60-inch (1.52 m) cast film.

Is the top of a BMW 503 wrapped?

No, the fabric top of a BMW 503 convertible is not wrapped. The film ends where the fabric begins. A folding hard top, if fitted, is wrapped as panels of its own.

Which BMW 503 body takes more film?

The coupe takes more film than the convertible. A BMW 503 coupe needs about 51 ft (15.5 m), while the convertible needs about 49 ft (15 m). The coupe's roof is the reason for the extra material.

Can I wrap only the hood or the roof of a BMW 503?

Yes, you can wrap only the hood or the roof of a BMW 503. A partial wrap can also cover the mirror caps. The roof, on a coupe, is wrapped as its own panel.