Wraps by car

BMW 600 wrap

This page covers the BMW 600 wrap and the vinyl wrap film a full body needs. The BMW 600 was built from 1957 to 1959 in one generation. A full wrap of the newest body takes about 34 ft (10.5 m) of 60-inch (1.52 m) cast film.

1generations10.5 mof film for a full wrap

BMW 600, first generation, factory photo
BMW 600, first generation. Factory color shown.

BMW 600 wrap colors and ideas

  • BMW 600 black wrap
  • BMW 600 white wrap
  • BMW 600 gray wrap
  • BMW 600 silver wrap
  • BMW 600 red wrap
  • BMW 600 blue wrap
  • BMW 600 green wrap
  • BMW 600 yellow wrap
  • BMW 600 orange wrap
  • BMW 600 purple wrap
  • BMW 600 pink wrap
  • BMW 600 teal wrap
  • BMW 600 brown wrap
  • BMW 600 gold wrap
  • BMW 600 chrome wrap
  • BMW 600 color shift wrap
  • BMW 600 carbon fiber wrap
  • BMW 600 camo and patterned wrap

How much vinyl to wrap a BMW 600

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1957–1959hatchback (3 doors)114.2 in (2,900 mm)about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m)

BMW 600 wrap cost factors

The BMW 600 wrap cost depends on the size of the car and the film you pick. A full wrap needs about 34 ft (10.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 9 ft (2.5 m) to the total. The condition of the paint also changes the amount of prep work.

  • Film for a full wrap: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

BMW 600 wraps by generation

Swipe sideways. Tap a card for the full description.

BMW 600, first generation, factory photo
Factory color shown

1957–1959 BMW 600 hatchback (first generation)

1957–1959hatchback (3 doors)114.2 in (2,900 mm)

The first generation BMW 600 was produced from 1957 to 1959 and came as a three-door hatchback. On a car of these years the panels may be original or repainted. A test spot comes before a full wrap to check how the film sticks to the paint. The tailgate and long side doors make the wrap straightforward.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).

Roof, hood, chrome delete and PPF on a BMW 600

A partial wrap on the BMW 600 covers the roof, hood or mirror caps. A chrome delete turns the window trim and badges black with film. Paint protection film (PPF) is clear film on the front end. These small jobs use less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW 600: body, cut-outs and film

A BMW 600 vinyl wrap has to fit a small hatchback body that is 114.2 in (2,900 mm) long. The three-door shape means the film is applied over the roof, the rear quarter panels and the tailgate. Because the car is short, the roof and hood are quick to cover. A full wrap uses less film than on a modern sedan.

For BMW 600 wrap ideas, the tailgate has the rear glass in it, so the film ends at the edge of the glass. The two long side doors are each one large piece of film. The door handles and badges are removed before the film goes on. The front grille and headlight rings also come off for a clean edge.

When you work out how much vinyl to wrap a BMW 600, the first generation is the only body style. A plain color change takes about 34 ft (10.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate goes up to about 43 ft (13 m). The length of 114.2 in (2,900 mm) keeps the material use low.

Questions about wrapping a BMW 600

How much vinyl does it take to wrap a BMW 600?

A BMW 600 needs about 34 ft (10.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film takes about 43 ft (13 m). The car is 114.2 in (2,900 mm) long and has a three-door hatchback body.

Can I wrap only the hood or the roof of a BMW 600?

Yes, you can wrap only the hood or the roof of a BMW 600. A partial wrap covers the roof, hood or mirror caps. You can also choose a chrome delete for the window trim and badges.

Is a BMW 600 hard to wrap?

A BMW 600 is not hard to wrap, but a few parts add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The two long side doors are each one large piece of film. The car is small at 114.2 in (2,900 mm) long, which makes handling easier.

How many generations of the BMW 600 does this page cover?

This page covers one generation of the BMW 600. The car was produced from 1957 to 1959 with a three-door hatchback body.