Wraps by car

BMW i3 wrap

This page covers vinyl wrap for the BMW i3, a subcompact hatchback built from 2013 to 2022. The i3 has one generation in the catalog, the first generation. A full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 9 ft (2.5 m) more.

1generations16 mof film for a full wrap

BMW i3, first generation, factory photo
BMW i3, first generation. Factory color shown.

BMW i3 wrap colors and ideas

  • BMW i3 black wrap
  • BMW i3 white wrap
  • BMW i3 gray wrap
  • BMW i3 silver wrap
  • BMW i3 red wrap
  • BMW i3 blue wrap
  • BMW i3 green wrap
  • BMW i3 yellow wrap
  • BMW i3 orange wrap
  • BMW i3 purple wrap
  • BMW i3 pink wrap
  • BMW i3 teal wrap
  • BMW i3 brown wrap
  • BMW i3 gold wrap
  • BMW i3 chrome wrap
  • BMW i3 color shift wrap
  • BMW i3 carbon fiber wrap
  • BMW i3 camo and patterned wrap

How much vinyl to wrap a BMW i3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2022hatchback (5 doors)157.4 in (3,999 mm) to 157.9 in (4,011 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

BMW i3 wrap cost factors

BMW i3 wrap cost depends on the size of the car, the film quality, and the amount of disassembly and cut-outs. The i3 is 157.4 in (3,999 mm) to 157.9 in (4,011 mm) long, which means a moderate amount of material. Chrome or patterned film takes about 61 ft (18.5 m), roughly 9 ft (2.5 m) more than standard cast film. The tailgate, parking sensors, and charge port door add time to the job.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

BMW i3 wraps by generation

Swipe sideways. Tap a card for the full description.

BMW i3, first generation, factory photo
Factory color shown

2013–2022 BMW i3 hatchback (first generation)

2013–2022hatchback (5 doors)157.4 in (3,999 mm) to 157.9 in (4,011 mm)

The first generation of the BMW i3 was built from 2013 to 2022 and restyled in 2017. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. This generation includes only the five-door hatchback body style. The length is 157.4 in (3,999 mm) before the restyling and 157.9 in (4,011 mm) after it.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a BMW i3

A partial wrap on a BMW i3 can cover the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW i3: body, cut-outs and film

The BMW i3 vinyl wrap goes onto a five-door hatchback that is 157.4 in (3,999 mm) to 157.9 in (4,011 mm) long. Its compact size keeps the total film area moderate. The upright body and short overhangs mean fewer complex curves than on a larger sedan. The tailgate is the largest single panel.

BMW i3 wrap ideas should account for the tailgate with rear glass in it, because the film ends at the edge of the glass. Every trim has parking sensors in the bumpers, so the installer cuts the film around each sensor. Some trims have cameras in the body, and the film is cut around each lens. The charge port door is wrapped as a small piece of its own on plug-in and electric versions.

How much vinyl to wrap a BMW i3 depends on the production year, because the body was restyled in 2017. The bumpers and lights changed in that restyling, so film cut for one version does not fit the other. The length changed from 157.4 in (3,999 mm) to 157.9 in (4,011 mm) at the same time. An installer counts about 52 ft (16 m) of film for the newest body.

Questions about wrapping a BMW i3

How much vinyl does it take to wrap a BMW i3?

A BMW i3 full wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 9 ft (2.5 m), for a total of about 61 ft (18.5 m). This estimate is for the newest body of the first generation.

Which years of the BMW i3 take the same film cuts?

The BMW i3 was built from 2013 to 2022, and all years share the same basic body. The only break for film cuts is the 2017 restyling, which changed the bumpers and lights. Film cut for a 2013–2016 i3 will not fit a 2017–2022 i3 and vice versa.

Can I wrap only the hood or the roof of a BMW i3?

Yes, you can wrap only the hood or the roof of a BMW i3. A partial wrap often includes the roof, hood, and mirror caps. The hood is a manageable size on this subcompact hatchback. The roof is also a good candidate for a contrasting color.

Is a BMW i3 hard to wrap?

The BMW i3 has some details that add work, but it is not a hard car to wrap. The tailgate includes the rear glass, so the film must end at the edge of the glass. Parking sensors and cameras require cut-outs. The charge port door is wrapped as a small separate piece.