Wraps by car

BMW M6 wrap

The BMW M6 wrap page covers the three generations of this full-size model from 1984 to 2018. A vinyl wrap of the newest body takes about 51 ft (15.5 m) for the convertible to 56 ft (17 m) for the sedan using 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 69 ft (21 m).

3generations15.5 mof film for a full wrap

BMW M6, third generation, factory photo
BMW M6, third generation. Factory color shown.

BMW M6 wrap colors and ideas

  • BMW M6 black wrap
  • BMW M6 white wrap
  • BMW M6 gray wrap
  • BMW M6 silver wrap
  • BMW M6 red wrap
  • BMW M6 blue wrap
  • BMW M6 green wrap
  • BMW M6 yellow wrap
  • BMW M6 orange wrap
  • BMW M6 purple wrap
  • BMW M6 pink wrap
  • BMW M6 teal wrap
  • BMW M6 brown wrap
  • BMW M6 gold wrap
  • BMW M6 chrome wrap
  • BMW M6 color shift wrap
  • BMW M6 carbon fiber wrap
  • BMW M6 camo and patterned wrap

How much vinyl to wrap a BMW M6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2018convertible, coupe, sedan (2 or 4 doors)192.8 in (4,898 mm) to 197.3 in (5,011 mm)about 51 ft (15.5 m) for the convertible to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)
2005–2010convertible, coupe (2 doors)191.8 in (4,871 mm)about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1984–1989coupe (2 doors)187.2 in (4,755 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

BMW M6 wrap cost factors

The BMW M6 wrap cost depends on the size of the body, the amount of film, and the labor for detailed parts. A first generation coupe uses about 49 ft (15 m) of film, while a third generation sedan uses about 56 ft (17 m). Chrome or patterned film increases the material amount to about 69 ft (21 m) on the newest body. Parking sensors, fog lamps, and convertible top edges add time for careful cutting.

  • Film for a full wrap: about 51 ft (15.5 m) for the convertible to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.

BMW M6 wraps by generation

Swipe sideways. Tap a card for the full description.

BMW M6, third generation, factory photo
Factory color shown

2012–2018 BMW M6 convertible, coupe, sedan (third generation)

2012–2018convertible, coupe, sedan (2 or 4 doors)192.8 in (4,898 mm) to 197.3 in (5,011 mm)

In the third generation BMW M6, the open top is not wrapped. The fabric top is left uncovered and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own. The convertible body also has parking sensors in the bumpers that require cut-outs.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 51 ft (15.5 m) for the convertible to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

BMW M6, second generation, factory photo
Factory color shown

2005–2010 BMW M6 convertible, coupe (second generation)

2005–2010convertible, coupe (2 doors)191.8 in (4,871 mm)

The second generation BMW M6 offers convertible and coupe bodies, and the style decides the panel plan and the film amount. The convertible uses a folding fabric top that is not wrapped, while the coupe has a fixed roof. Both styles have two long side doors, each door wrapped as one large piece of film. The coupe needs about 52 ft (16 m) of film, and the convertible about 51 ft (15.5 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

BMW M6, first generation, factory photo
Factory color shown

1984–1989 BMW M6 coupe (first generation)

1984–1989coupe (2 doors)187.2 in (4,755 mm)

On a BMW M6 from the first generation, paint age is a key concern before a full wrap. These cars are from 1984 to 1989, so panels may be original paint or have been repainted at different times. A test spot helps check that the film will adhere properly to the existing paint. The installer will inspect the surface for clear coat failure or other issues before wrapping.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a BMW M6

A BMW M6 chrome delete covers the window trim and badges with black film. A partial wrap can include the roof, hood, and mirror caps. Paint protection film (PPF) is clear film applied to the front end. These jobs are smaller than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW M6: body, cut-outs and film

The BMW M6 vinyl wrap is shaped by the body styles and sizes across its three generations. The first generation has only a coupe at 187.2 in (4,755 mm), while the second adds a convertible at 191.8 in (4,871 mm). The third generation spans 192.8 in (4,898 mm) to 197.3 in (5,011 mm) with convertible, coupe, and sedan styles. Larger panels on the sedan and the long doors mean more film is used.

For BMW M6 wrap ideas, consider the parts that need cut-outs or come off the car. Every trim of the third generation has parking sensors in the bumpers, so the film is cut around each sensor. On the second generation, the fog lamps in the front bumper require cut-outs in the bumper film. The convertible top is not wrapped, and the film ends where the fabric or hard top begins.

How much vinyl to wrap a BMW M6 changes between the generations for someone who counts film. The first generation coupe needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. The second generation convertible takes about 51 ft (15.5 m) and the coupe about 52 ft (16 m). The third generation ranges from about 51 ft (15.5 m) for the convertible to 56 ft (17 m) for the sedan. Chrome or patterned film adds roughly 30% to these amounts.

Questions about wrapping a BMW M6

How much vinyl does it take to wrap a BMW M6?

It takes about 51 ft (15.5 m) to 56 ft (17 m) of vinyl to wrap a BMW M6, depending on the body style of the newest generation. The convertible needs about 51 ft (15.5 m) and the sedan about 56 ft (17 m) using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 69 ft (21 m).

Is the top of a BMW M6 wrapped?

The top of a BMW M6 convertible is not wrapped. The fabric top is left uncovered and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own. On the coupe and sedan, the roof is part of the body and is wrapped like other panels.

Which BMW M6 body takes more film?

The BMW M6 sedan takes more film than the convertible or coupe in the third generation. The sedan needs about 56 ft (17 m) of 60-inch (1.52 m) cast film, while the convertible needs about 51 ft (15.5 m) and the coupe about 52 ft (16 m). In the second generation, the coupe uses slightly more film than the convertible.

Can I wrap only the hood or the roof of a BMW M6?

Yes, you can wrap only the hood or the roof of a BMW M6 as a partial wrap. A partial wrap can include the roof, hood, and mirror caps. Chrome delete is another option for window trim and badges. Paint protection film covers the front end with clear film.