Wraps by car

BMW Z1 wrap

A BMW Z1 wrap transforms this rare E30-based sports car. The catalog covers the single first generation built from 1988 to 1991. A full vinyl wrap of this convertible takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

1generations12.5 mof film for a full wrap

BMW Z1, first generation, factory photo
BMW Z1, first generation. Factory color shown.

BMW Z1 wrap colors and ideas

  • BMW Z1 black wrap
  • BMW Z1 white wrap
  • BMW Z1 gray wrap
  • BMW Z1 silver wrap
  • BMW Z1 red wrap
  • BMW Z1 blue wrap
  • BMW Z1 green wrap
  • BMW Z1 yellow wrap
  • BMW Z1 orange wrap
  • BMW Z1 purple wrap
  • BMW Z1 pink wrap
  • BMW Z1 teal wrap
  • BMW Z1 brown wrap
  • BMW Z1 gold wrap
  • BMW Z1 chrome wrap
  • BMW Z1 color shift wrap
  • BMW Z1 carbon fiber wrap
  • BMW Z1 camo and patterned wrap

How much vinyl to wrap a BMW Z1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1991convertible (2 doors)154.4 in (3,921 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

BMW Z1 wrap cost factors

BMW Z1 wrap cost depends on film choice, prep work, and the car's condition. Its 154.4 in (3,921 mm) length and two-door body set the material needs. A full wrap uses about 41 ft (12.5 m) of cast film, and chrome or patterned film raises the total to about 48 ft (14.5 m).

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

BMW Z1 wraps by generation

Swipe sideways. Tap a card for the full description.

BMW Z1, first generation, factory photo
Factory color shown

1988–1991 BMW Z1 convertible (first generation)

1988–1991convertible (2 doors)154.4 in (3,921 mm)

The first-generation BMW Z1 open top is a fabric convertible that is never wrapped. The film ends where the soft top begins, leaving the top untouched. A folding hard top would be wrapped as separate panels, but the Z1 uses only fabric.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a BMW Z1

A partial wrap on a BMW Z1 suits the hood, mirror caps, or rear deck. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as clear film on the front end.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BMW Z1: body, cut-outs and film

A BMW Z1 vinyl wrap must suit its compact 154.4 in (3,921 mm) convertible body. The two-door style keeps panel count low, but the fabric top is not wrapped. Film ends cleanly where the soft top begins.

BMW Z1 wrap ideas start with its distinctive drop-down doors. The door panels move into the sills, so film edges must be trimmed carefully there. The fabric top is left unwrapped, and the wrap ends at its base.

When counting how much vinyl to wrap a BMW Z1, one generation keeps it simple. The 1988–1991 E30 convertible is the only body style. A full wrap needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film, or 48 ft (14.5 m) for chrome or patterned film.

Questions about wrapping a BMW Z1

How much vinyl does it take to wrap a BMW Z1?

A full BMW Z1 wrap takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 48 ft (14.5 m). These figures cover the first-generation convertible body.

Is the top of a BMW Z1 wrapped?

No, the top of a BMW Z1 is not wrapped because it is fabric. The wrap ends where the soft top begins. A folding hard top would be wrapped as separate panels, but the Z1 has only a fabric top.

Can I wrap only the hood or the roof of a BMW Z1?

Yes, you can wrap only the hood, mirror caps, or rear deck of a BMW Z1. A chrome delete for the window trim and badges is another partial option. Clear paint protection film (PPF) on the front end is also a smaller job.

Is a BMW Z1 hard to wrap?

A BMW Z1 is not hard to wrap, but its drop-down doors add work. The door panels slide into the sills, so film edges need extra trimming. Its 154.4 in (3,921 mm) length is compact, which keeps the surface area manageable.