Wraps by car

Brabus 7.3S wrap

This page covers the Brabus 7.3S, a high-performance luxury sedan built in one generation from 1991 to 1998. A full vinyl wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 74 ft (22.5 m) of material.

1generations19.5 mof film for a full wrap

Brabus 7.3S, first generation, factory photo
Brabus 7.3S, first generation. Factory color shown.

Brabus 7.3S wrap colors and ideas

  • Brabus 7.3S black wrap
  • Brabus 7.3S white wrap
  • Brabus 7.3S gray wrap
  • Brabus 7.3S silver wrap
  • Brabus 7.3S red wrap
  • Brabus 7.3S blue wrap
  • Brabus 7.3S green wrap
  • Brabus 7.3S yellow wrap
  • Brabus 7.3S orange wrap
  • Brabus 7.3S purple wrap
  • Brabus 7.3S pink wrap
  • Brabus 7.3S teal wrap
  • Brabus 7.3S brown wrap
  • Brabus 7.3S gold wrap
  • Brabus 7.3S chrome wrap
  • Brabus 7.3S color shift wrap
  • Brabus 7.3S carbon fiber wrap
  • Brabus 7.3S camo and patterned wrap

How much vinyl to wrap a Brabus 7.3S

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1998sedan (4 doors)205.2 in (5,213 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Brabus 7.3S wrap cost factors

The Brabus 7.3S wrap cost depends on the size of the sedan and the film you select. This car needs about 64 ft (19.5 m) of standard 60-inch (1.52 m) film, or 74 ft (22.5 m) for chrome or patterned material. Surface condition matters too: a 1990s car with original paint may need more prep work before film is applied.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).

Brabus 7.3S wraps by generation

Swipe sideways. Tap a card for the full description.

Brabus 7.3S, first generation, factory photo
Factory color shown

1991–1998 Brabus 7.3S sedan (first generation)

1991–1998sedan (4 doors)205.2 in (5,213 mm)

Because the first generation Brabus 7.3S left the factory between 1991 and 1998, paint condition varies from car to car. Some panels may be original while others have been repainted, and a test spot on each surface is wise before a full wrap. Checking adhesion on aged paint helps avoid lifting or damage when the film is removed.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Brabus 7.3S

On a Brabus 7.3S, you can wrap only the roof, hood, or mirror caps as a partial job instead of the whole sedan. A Brabus 7.3S chrome delete covers the window trim and badges with black film for a more modern look. Paint protection film (PPF) is also an option, with clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Brabus 7.3S: body, cut-outs and film

The Brabus 7.3S sedan has a four-door, full-size body measuring 205.2 in (5,213 mm) in length. A Brabus 7.3S vinyl wrap covers large, relatively flat panels, which makes the main surfaces straightforward for an installer. The long roofline and tall doors add surface area compared with smaller sedans, so film use is higher than on many modern cars.

A Brabus 7.3S wrap involves cut-outs around door handles, trim, lights, and the front grille. The bumpers, side mirrors, and door handles are removed for a cleaner edge on this sedan. For Brabus 7.3S wrap ideas, consider a satin or gloss color change to highlight the classic boxy shape.

There is one generation of the Brabus 7.3S, produced from 1991 to 1998, so film needs are consistent across all examples. When measuring how much vinyl to wrap a Brabus 7.3S, use about 64 ft (19.5 m) of standard cast film on this body. Chrome or patterned wraps require about 74 ft (22.5 m) because of pattern matching and extra waste.

Questions about wrapping a Brabus 7.3S

How much vinyl does it take to wrap a Brabus 7.3S?

A full wrap of a Brabus 7.3S takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast vinyl film. If you choose chrome or patterned film, the total rises to about 74 ft (22.5 m) because of extra material needed for trimming and matching.

Can I wrap only the hood or the roof of a Brabus 7.3S?

Yes, you can wrap only the hood or the roof of a Brabus 7.3S. Partial wraps on this sedan often cover the roof, hood, or mirror caps, and a chrome delete on the window trim and badges is another smaller job.

Is a Brabus 7.3S hard to wrap?

A Brabus 7.3S is not the hardest car to wrap, but its length of 205.2 in (5,213 mm) adds working time. The sedan's large bumpers and mirror caps must be removed for proper coverage, and older paint may need careful testing before film is applied.

How many generations of the Brabus 7.3S does this page cover?

This page covers one generation of the Brabus 7.3S, produced from 1991 to 1998.