Wraps by car

Brabus M V12 wrap

The Brabus M V12 wrap page covers the 1997–2001 first-generation SUV body in full. This catalog entry lists the dimensions, the film estimate, and the wrap-specific details for the single generation in our data. A full vinyl wrap of the Brabus M V12 takes about 61 ft (18.5 m) of standard 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

Brabus M V12, first generation, factory photo
Brabus M V12, first generation. Factory color shown.

Brabus M V12 wrap colors and ideas

  • M V12 black wrap
  • M V12 white wrap
  • M V12 gray wrap
  • M V12 silver wrap
  • M V12 red wrap
  • M V12 blue wrap
  • M V12 green wrap
  • M V12 yellow wrap
  • M V12 orange wrap
  • M V12 purple wrap
  • M V12 pink wrap
  • M V12 teal wrap
  • M V12 brown wrap
  • M V12 gold wrap
  • M V12 chrome wrap
  • M V12 color shift wrap
  • M V12 carbon fiber wrap
  • M V12 camo and patterned wrap

How much vinyl to wrap a Brabus M V12

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2001SUV (5 doors)180.6 in (4,587 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

M V12 wrap cost factors

M V12 wrap cost depends on the size of the SUV body, the film chosen, and the labor for the tall roof and tailgate area. A color change wrap uses about 61 ft (18.5 m) of cast film, while chrome or patterned film needs about 77 ft (23.5 m). The extra time to work from a platform and to trim the film at the rear glass edge also affects the final cost.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (70.9 in (1,802 mm)): the roof is wrapped from a platform.

M V12 wraps by generation

Swipe sideways. Tap a card for the full description.

Brabus M V12, first generation, factory photo
Factory color shown

1997–2001 M V12 SUV (first generation)

1997–2001SUV (5 doors)180.6 in (4,587 mm)

The first-generation Brabus M V12 (1997–2001) is a five-door SUV with a body height of 70.9 in (1,802 mm). The roof of this generation is wrapped from a platform, which adds time and care to the installation. The tailgate includes the rear glass, so the wrap ends at the edge of the glass for a clean look.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (70.9 in (1,802 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on an M V12

A partial wrap on the Brabus M V12 can cover the roof, hood, or mirror caps, and these areas are a good way to change the look without a full wrap. M V12 chrome delete covers the window trim and badges with black film to replace the bright trim. Paint protection film (PPF) on the front end is a clear option that guards the hood, bumper, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Brabus M V12: body, cut-outs and film

The Brabus M V12 vinyl wrap starts with a five-door SUV body that is 180.6 in (4,587 mm) long. The tall 70.9 in (1,802 mm) body means installers work from a platform to reach the roof and upper panels cleanly. The tailgate includes the rear glass, so the film edge must be trimmed exactly at the glass line.

For M V12 wrap ideas, the five-door SUV layout leaves the roof, hood, mirror caps, and window trim as natural accent areas. The tall body makes a roof wrap a visible change that is handled from a platform. The tailgate with the rear glass inside calls for a cut line that follows the glass edge, and the badges are removed for a smooth surface.

If you want to know how much vinyl to wrap an M V12, the first-generation body is the only one in this catalog. The figure of about 61 ft (18.5 m) accounts for the 180.6 in (4,587 mm) length and the tall roof area. A chrome or patterned film requires more material, about 77 ft (23.5 m), because the pattern must be matched across panels.

Questions about wrapping a Brabus M V12

How much vinyl does it take to wrap a Brabus M V12?

A full wrap of the Brabus M V12 takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 77 ft (23.5 m) to allow pattern matching.

Can I wrap only the hood or the roof of an M V12?

Yes, you can wrap only the hood or the roof of an M V12. A partial wrap can cover the roof, hood, or mirror caps, and the tall roof is handled from a platform.

Is an M V12 hard to wrap?

The M V12 is harder to wrap than an average car because of its tall body and the tailgate with the rear glass. The roof requires a platform, and the film must be trimmed exactly at the glass edge. The SUV length of 180.6 in (4,587 mm) also means more surface area and more material.

How many generations of the M V12 does this page cover?

This page covers one generation of the M V12, the first generation produced from 1997 to 2001. The catalog does not list any other generations for this model.